Nuova Fima is a leading Italian manufacturer of pressure gauges, electronic pressure transducers, diaphragm dividers, thermometers, thermowells for temperature sensors, pressure and temperature control devices in technological processes. The quality of our products, accuracy and safety meet the highest international standards, as confirmed by the relevant certificates. Nuova Fima has been manufacturing pressure and temperature measuring instruments for over 50 years.
Official website of the manufacturer www.nuovafima.com
TEXAIR FZCO is an official distributor of NUOVA FIMA and supplies control & measuring instruments to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Bourdon tube test gauges all stainless steel construction, “solid-front” class 0,6% DS 6” (150mm)
These instruments have been designed for laboratories, instrument testing or recalibration facilities and in other applications where accuracy and repeatability are of primary importance. These intruments have a solid separating wall in stainless steel, placed between the dial and the elastic element and an integral blow out back that is released from the case whenever a pressure is created inside the case, due to leaks or accidental ruptures of the elastic element. Thay can be used with fluids or gasses that do not have high viscosity and do not cristallize. The wetted parts in AISI 316L permits to use them in worse working conditions determined by aggressive ambients or process fluids. Upon request we can supply the calibration certificate issued by an Internationally recognized laboratory of ACCREDIA (Ex S.I.T. – Italian Calibration Service).
price on request
Pressure gauge “solid-front” turret case DS 4.5″ (125mm)
These instruments are built in accordance with safety specifications ASME B40.1, UNI-EN 837-2.
The safety construction consists of a stainless steel “solid-front” safety cell placed behind the scale, which welding to socket gives to instrument an exceptional strength. Whenever, due to leaks, an internal pressure is created or the elastic element is broken the safety cell protects the front and sides, meanwhile the blow out back is released from the case. They are designed for use in chemical, petrochemical, conventional power plants. The dampened movement make them particularly suitable in presence of high vibrations and pulsating pressure.
price on request
Pressure gauges for SF6 gas monitoring DS 4” (100 mm)
These instruments are manufactured to monitor the electrical operations on hermetically sealed systems containing Sulphur Hexafluoride gas (SF6). The indication and the electrical operations are calibrated to the gas density (isochore) according to the relation pressure-temperature. The M5 model is suitable for indoor installation while the M6 model has been designed for the outdoor installation as well. The oil filled executions are particularly suitable for installation when vibrations are apparent.
price on request
Bourdon tube pressure gauges stainless steel construction DS 4” (100mm)
They are designed for industrial use. They are suitable for tough working conditions and for aggressive fluids. An exclusive Laser calibration procedure features each instrument and allows a very precise accuracy. Filling the case with dampening liquid prevents any condensation and the entrance of corrosive atmosphere increasing its resistance to vibrations and to pulsating pressures.
price on request
Bourdon tube test gauges “solid-front” , class 0,25% DS 6” (150mm)
These instruments have been designed for laboratories, instrument testing or recalibration facilities and in other applications where accuracy and repeatability are of primary importance. These intruments have a solid separating wall in stainless steel, placed between the dial and the elastic element and an integral blow out back that is released from the case whenever a pressure is created inside the case, due to leaks or accidental ruptures of the elastic element. Thay can be used with fluids or gasses that do not have high viscosity and do not cristallize. The wetted parts in beryllium copper permits higher accuracy. Upon request we can supply the calibration certificate issued by an Internationally recognized laboratory of ACCREDIA (Ex S.I.T. – Italian Calibration Service).
price on request
Bourdon tube “solid-front” pressure gauges for high pressures, turret case DS 4.5” (125 mm)
These instruments are built in conformity with the construction and safety specifications of ASME B40.1.
In case of leaks or break of the elastic element the operator is protected by a stainless steel safety cell solid front and by the blow-out back. They are mainly used on high pressure water jet technology like water cutting machines, hydro blasting pumps and turbines, hydrodemolition. The TIG welding between the safety cell and the process socket strengthens the instrument and assures a better tight in case of dampening fluid The advantages of filling the case of the instrument with a dampening fluid are: reduced pointer fluctuation, reduced wear of rotating parts of the movement when pulsant vibrations and pulsations occur. Moreover condensation and corrosive atmospheres which could damage the internal parts.
price on request
Pressure gauges for SF6 gas monitoring DS 4” (100 mm)
These instruments are manufactured to monitor the electrical operations on hermetically sealed systems containing Sulphur Hexafluoride gas (SF6). The indication and the electrical operations are calibrated to the gas density (isochore) according to the relation pressure-temperature. The M5 model is suitable for indoor installation while the M6 model has been designed for the outdoor installation as well. The oil filled executions are particularly suitable for installation when vibrations are apparent.
price on request
Bourdon tube pressure gauges NACE MR0103/MR0175 – ISO 15156-3 version DS 4”, 6” (100-150mm)
These instruments are designed for petrochemical industry. They are built to resist to the most severe conditions created by H2S, by the environment and for those fluids, which have high viscosity and do not crystallize. The quality of the materials used to build the sensible element allows their use with high frequency pulsating pressures. The TIG welding between the case and the process socket, strengthens the instrument and assures a better tight in case of dampening fluid. The advantages of filling the case of the instrument with a dampening fluid are: reduced pointer fluctuation, reduced wear of rotating parts of the movement when pulsant vibrations and pulsations occur. Moreover condensation and corrosive atmospheres which could damage the internal
price on request
With more than 80 years of experience and 5 branches worldwide, Nuova Fima contributes to the export of products labelled “Made in Italy” worldwide and participates in the development of measuring technology.
Most of the components used in the production of instruments are manufactured in Nuova Fima’s factory. In order to work with a very high level of quality and to fulfil production and service standards, all materials are selected with great care.
All components, both for mechanical and electronic instruments, are manufactured with modern automated equipment – optimising cost, guaranteeing precision and error-free performance.
The Bourdon tube is the heart of the pressure measuring system. The materials for the Bourdon tube are copper alloys and stainless steel (strictly AISI 316L), which are machined on special machines. The machines have been developed over many years of research and are the ” know how ” of the company. The shape of the machined Bourdon tube is checked by a very precise dimensional control system. The connection of the measuring element with the measurement standards is achieved through the use of a laser marking system.
Welding and brazing procedures are certified and use modern automatic robotic systems, backed up by the high professionalism of the operators, who are a key factor in the success of the company.
All welded parts are tested on a helium leak detector capable of measuring leaks of 1 x 10-7mbar/l/s-1.
All calibration and assembly procedures are performed using high-performance automated systems designed specifically for us. Calibration procedures are carried out by the co-operation of our well-trained technical staff.
Our manufacturing methods guarantee the reliability of measurement accuracy and repeatability that is inherent in Nuova Fima products, which are at the forefront of the pressure and temperature measurement market.
In the early 1970’s, long before the advent of quality systems, Nuova Fima considered the quality of raw materials, components and finish products to be very important. In order to implement our own quality system, we started a policy of staff development. This policy continues to this day. Continuous improvement is a guarantee that the quality of the appliances manufactured in Europe by Nuova Fima cannot be beaten.