Products not found
Atomizer Aerosol Generator ATM 240/L for aerosol generation from liquids, compressed air operated, high mass flow rate, ideal for PSL aerosols acc. ISO 29463
price by request
Available
The Single-Jet Atomizer 9302 is the most cost-effective way to generate a polydisperse aerosol stream from a simple compressed air source. It is also our simplest atomizer with a built-in pressure regulator for controlling air from an external source.
price by request
Available
Atomizer Aerosol Generator ATM 240/S for aerosol generation from liquids, compressed air operated, high mass flow rate, ideal for KCl aerosols acc. ISO 16890
price by request
Available
The Dust Aerosol Generator Model 3410 disperses dry dust and powders for applications that need continuous and stable dosing with high accuracy. These defined test aerosols are commonly used in aerosol science, filter testing, industrial processes, and quality assurance tasks. The interchangeable dispersing units make it possible to disperse different materials (e.g. soot, TiO2 , cellulose, or ISO 12103 test dust) at different output concentrations. A pressurized cover keeps the material dry even in locations with higher ambient humidity.
price by request
Available
Atomizer Aerosol Generator ATM 241 for aerosol generation from liquids, compressed air operated, very high mass flow rates, operation with 1 to 4 nozzles
price by request
Available
Useful for a variety of applications, the Fluidized Bed Aerosol Generator Model 3400A aerosolizes dry powders and dusts. Using bronze beads to break up powder agglomerates, the 3400A generates a constant output in terms of aerosol concentration and size distribution. It is used in various applications such as filter testing, inhalation toxicology testing, and providing seed particles for laser-velocimetry.
price by request
Available
Atomizer Aerosol Generator ATM 243 for aerosol generation from liquids, compressed air operated, heatable, ideal for motor oils and oil mist separator testing
price by request
Available
Designed primarily for filter testing, the Large Particle Aerosol Generator 8108 produces highly concentrated aerosol in a broad particle-size range, from 0.1 to 10 µm in diameter. It produces potassium chloride (KCl) or other aerosols, and it meets the requirements of the established ISO/TS 11155-1 and ASHRAE 52.2 test codes, as well as the proposed ISO 16890 Part 2 code. Designed for easy cleaning, it provides accurate and repeatable results.
price by request
Available
Solid Aerosol Generator SAG 410 for aerosol generation from powders, toothed belt dosing, moderate mass flow rates
price by request
Available
The Particle Generator Model 8026 is a unique instrument that supplements the ambient particle count, allowing the PortaCount Pro+ Respirator Fit Tester to be operated in areas where the normal particle count is not sufficient.
price by request
Available
Solid Aerosol Generator SAG 410/H for aerosol generation from powders, toothed belt dosing, high mass flow rates
price by request
Available
A stable and simple way to create polydisperse aerosols, the Constant Output Atomizer Model 3076 is a reliable aerosol generator that is suitable for numerous applications. Model 3076 can generate aerosols from solutions prepared in water or in alcohols; solvents are typically removed from the sample stream by a Model 3062 desiccant drier.
price by request
Available
Atomizer Aerosol Generator ATM 210 for aerosol generation from liquids against counter pressure up to 10 bar, compressed air operated, moderate mass flow rate
price by request
Available
Solid Aerosol Generator SAG 410/L for aerosol generation from powders, toothed belt dosing, low mass flow rates
price by request
Available
Easily portable and simple to operate, Aerosol Generator Model 3079A is a great tool to generate submicron aerosols for a variety of applications. Generating a high concentration of polydisperse aerosols, Model 3079A can be used with both water-based and alcohol-based solutions.
price by request
Available
Atomizer Aerosol Generator ATM 210/H for aerosol generation from liquids against counter pressure up to 10 bar, compressed air operated, moderate mass flow rate
price by request
Available
Solid Aerosol Generator SAG 410/M for aerosol generation from powders, toothed belt dosing, low mass flow rates, large reservoir
price by request
Available
The Portable Test Aerosol Generator 3073 is a high-end test aerosol generator for low and high concentration polydisperse droplet aerosols. It generates submicron aerosols from oils, and from salt or PSL solutions. The innovative new flow control reduces power consumption and achieves highly stable low particle production rates, ideal for calibration of particle sizing instruments. Its compact and lightweight design coupled with the potential of user-supplied battery operation make it a perfect fit for use in field test applications.
price by request
Available
Atomizer Aerosol Generator ATM 211 for aerosol generation from liquids against counter pressure up to 10 bar, compressed air operated, corrosion-resistant
price by request
Available
Solid Aerosol Generator SAG 410/P for aerosol generation from powders, ring dosing, low mass flow rates, large reservoir, best for powders with low flowability
price by request
Available
The Submicrometer Monodisperse Aerosol Generator 3940A System includes everything you need to produce monodisperse, submicrometer particles. A component-based system, the 3940A comprises the ability to generate, condition, and size-select the particles. Touchscreen controls make it easy to change particle sizes, and the 3081A DMA makes it possible to size-select for particles from 0.01 – 1.0 µm.
price by request
Available
Atomizer Aerosol Generator ATM 220 for aerosol generation from liquids, compressed air operated, base model with broad operational range
price by request
Available
Solid Aerosol Generator SAG 410/U for aerosol generation from powders, ring dosing, low mass flow rates, best for powders with low flowability
price by request
Available
When your application needs aerosolized nano-scale particles, such as viruses, proteins, or synthetic nanoparticles, the Advanced Electrospray Aerosol Generator (EAG) Model 3482 is the best tool for the job. In addition to enabling the characterization of biological or synthetic nanoparticles, the EAG 3482 can be used to generate nanoparticles for instrument calibration and characterization. Touchscreen controls and a camera make it easy to see and control the aerosol generation process and the instrument design makes it possible to switch samples quickly and easily.
price by request
Available