Products not found
MONITORING THE ENVIRONMENTAL CONDITIONS is more convenient with the Model EMMA multifunction meter. Humidity, temperature, air velocity, air flow, sound and light measurements are combined in one easy to use instrument. The large, dual-line 4-digit LCD display shows both the current and average reading. For reading measurements in dimly lit areas, the display has a built-in back light. Besides measuring the current and average reading, the Model EMMA allows the user to read the minimum, maximum and differential measurement for each of the parameters. Included with the meter is the carrying case, rubber boot, battery and tri-pod.
Retail price from $614,05
The Model UTG Ultrasonic Thickness Gage measures the thickness of a variety of materials. The UTG works on a variety of parallel surface material ranging from 0.05 to 7.9″ (1.2 to 200 mm).
Retail price from $466,45
Retail price from $124
Series IPV Air Hammer (single impact model) focuses on a limited target. Other equipment of the target is minimally affected by it. It is often applied onto a pipe or clean elbow in a tank filled with humidity or low specific gravity material.
Retail price from $382,95
The Tell Tale Jr.™ Open Heater Detector is designed to indicate an open heater or other resistive load. Several models are available for various applications. The LED models light an LED when current is flowing in the circuit. If current stops flowing, the LED turns off. Solid state switch models provide either a logic output for DC applications or a triac output for AC applications. These models will satisfy those applications that need to send heater data to a PLC or computer having an appropriate power supply. They are provided with 4 foot leads. If the triac output model is used to drive an inductive load (relay coil, etc.) then the 3138-0412 snubber network is required. While the Tell Tale Jr.™ Detector is self-powered there is no power loss in the monitored load circuit when installed.
Retail price from $79,35
The Series AN2 Indicating Alarm Annunciator provides visible and audible alarms for up to eight inputs. The annunciator also has two SPDT relay outputs that can be used to initiate external alarms, buzzers, or paging devices. The Integral 24 VDC power supply can power most level, temperature, pressure, and flow switches. Audible alarm conditions can be acknowledged, reset, or silenced either via the front panel push buttons or the rear terminal block. The Series AN2 can be set to any common ISA sequences including First-Out.
Retail price from $662,4
The Model CPS Cable Pull Switch is designed to provide a switching system to isolate the power to the conveyor system or other similar process equipment in event of a shutdown condition. A steel wire is placed along the side of the conveyor and attached to the cable pull switch. When the cable is pulled at any point along the conveyor it will trip the cable pull switch causing the conveyor to shut down. To restart the conveyor the CPS must be manually reset. The CPS has a universal design for bi-directional activation and utilizes a highly visible red flag to indicate the switch status. The compact design makes it ideal for easy installation.м
Retail price from $361,2
The Series PMT2 Particulate Transmitter is designed to measure particulate emission levels from dust collector discharge. Using DC coupled electrostatic induction sensing technology, the transmitter monitors a pA current that is generated as particulate passes near the probe; a 4 to 20 mA signal will vary based on the particulate level. The PMT2 offers 6 sensitivity ranges allowing the user to choose the range that will best fit the application. The range and test selector switch can also be set to output a 4 mA or 20 mA signal to assist with set up or trouble shooting. Averaging time setting can be used to dampen the signal if desired.
Retail price from $2422,15
The Series SL-2000 Duct Smoke Detector is crucial for early detection of smoke and products of combustion present within HVAC ductwork. This series can be utilized in many different types of applications including commercial, industrial, and residential. The unit is designed to not only alarm when smoke is detected, but will also utilize relays to disable fans and blowers. The series comes complete with technician friendly “No-Tools Required” features to make installation and servicing simple and efficient.
Retail price from $278,65
The Series PMI Particulate Matter Transmitter is designed to measure indoor air quality by detecting particulate matter in an office environment or HVAC duct. Using laser scattering technology, the Series PMI can measure particles as small as 0.3 µm, making it an essential component of any indoor air quality monitoring system. The optional relay combined with the settable alarm and control parameters allow the Series PMI to be a stand-alone controller.
Retail price from $293,95
The Series FPCA Flow Power Control Accessories include mounting kits, power converters, and power supplies for compatible flow meters. These accessories simplify installation by offering meter and wall mounting options. Furthermore, power input and supply are no longer an issue with the power converter and dual power supply. The WMK can be used to mount Series BAT, RTI, or PWD on Series PDWS. The MMK can be used to mount either Series BAT or RTI to a wall with the use of Series EFS2, IEFS, PDWS, IPFS, TBS, or FLMG. Model PWC1 can be used with Series PDW, EFS2, or IEFS to convert 115 VAC to 25 VDC. Model PWC2 can be used with Series EFS2, IEFS, PDWS, IPFS, and TBS to convert 115 VAC to 12/24 VDC and provide dual power output for use with Series BAT and RTI.
Retail price from $159,5
The Series A-IEF Remote Display can be installed almost anywhere near a Series IEF flow transmitter or Series IEFB thermal energy meter. Both the indicator display (A-IEF-IDSP-RM) and the full functional display (A-IEF-FDSP-RM) have a maximum display cable length of 100 ft (30 m) to permit easy viewing of flow readings. The full functional display allows for convenient adjustment of configuration settings and allows the user to save the IEF or IEFB configuration settings to a computer for printing.
Retail price from $762,3
The Series RTI2 Rate & Total Indicator is an indicator/transmitter that takes the pulse output signal from compatible flowmeters, displays flow rate and total, and provides output signals. It is compatible with the Series IEF and PFT.
Retail price from $1026,7
Model TR-7 Safe-T-Ground provides continuous monitoring of a truck’s ground connection throughout loading operations. Static electricity is often brought in by tank trucks entering the loading area. The Safe-T-Ground Model TR-7 instantly stops loading operations if a tank truck loses its ground.
To safeguard loading operations, the Safe-T-Ground circuit can be wired into your pump control – and to an audible alarm or signal light.
Retail price from $1824,15
Model TAC-L Portable Digital Tachometer measures rotational speed either by contacting a rotatable head to the shaft of the object, or using photo sensor to detect the reflections from the laser. The laser target can record from a distance of up to 20 inches and gives a more accurate measurement than LED targeting. Model TAC-L includes a large LCD with a backlight for use in dark areas. This tachometer is made of a strong, lightweight ABS plastic housing, which is designed to comfortably fit in the hand of the user. Supplied with this model are 3 contact rotational heads, a contact surface wheel, and a protective carrying case.
Retail price from $114,55
Model SM-100 Digital Sound Meter is ideal for measuring noise levels from 30 to 130 dB with accuracy of ±1.5 dB. Model SM-100 has a frequency of 31.5 Hz to 8 kHz, three different dB ranges, and a 1/2″ condenser microphone. The SM-100 has two frequency weightings: the “A” weighting ranges from 30 to 130 dB, while the °C” weighting ranges from 35 to 130 dB. The four digit LCD backlit display has the ability to update in 0.5 seconds when the unit is set to fast response. Model SM-100 features data hold, ability to record maximum/minimum, auto ranging, auto power-off, and a dynamic range of 50 dB. The compact size of the SM-100 makes it very easy to operate and store. Each unit includes battery, carrying case, black foam cover to protect the sensor, and instruction manual. The SM-100 is ideal for technicians measuring and recording sound levels in zones or rooms of buildings, musical halls, theaters and near equipment or machinery on the plant floor.
Retail price from $220,85
TSI’s FMS system is an advanced, reliable, and user-friendly monitoring software suite that features a truly distributed architecture. High availability databases and hot standby system failover functionality assures compliance and peace of mind. Standard inputs include: airborne particle counters (multiple manufacturers supported), temperature/humidity, differential pressures, air velocity and digital inputs. Any device that has a linear analog output can be integrated into FMS including:
price by request
Stand-Alone Instrument for On-Site Humidity Validation
- Simple operation and maintenance
- Easy calibration of relative humidity sensors
- Excellent chamber stability and uniformity
- Manual control or optional straightforward automated set point programming
- Optional in-built data-logging for reference probe and probes under calibration
- Humidity and temperature-controlled chamber
- Generate 10 to 90% RH over +10 to +50°C temperature
- Transportable to allow on-site calibrations
price by request
Non-Depleting Rugged Paramagnetic Sensor
- Compact, lightweight and easy to install
- Intuitive user interface
- Tough IP55 housing
- Low cost of ownership due to minimal maintenance
- Measurement ranges from 0 to 1% up to 0…25 % O2 and 20/80/90…100 % O2
- Accuracy of better than ±1 % full scale
- 2 x 4…20 mA outputs and Modbus RTU over RS485 as standard
price by request
Robust Long-Life MSRS Zirconia Sensor
- Measurement range: 0.01 to 25% O2
- Various probe for stack temperatures up to 1,400°C
- No air reference required with our Metallic Sealed Reference Sensor
- Long life zirconia cell with reliable accurate measurements
- Simple to maintain, easy to calibrate every 6 months
- Robust design that is simple to use
- Quick and easy to install
price by request
Hydrogen, Binary Gas and Gas Mixtures Measurement
- Compact, lightweight and easy to install
- Intuitive user interface
- Tough IP55 housing
- Low cost of ownership due to minimal maintenance
- Measurement ranges from 0 to 5% up to 0…100 % and 50/80/90…100 %
- Accuracy of better than ±1 % full scale
- 2 x 4…20 mA outputs and Modbus RTU over RS485 as standard
price by request
Thermal Conductivity Technology in Safe or Hazardous Areas
- Suitable for use in ATEX, UKCA, IECEx, TR CU Ex & cQPSus certified Hazardous Areas
- Optional status LEDs following NAMUR standard
- Compact and rugged design with an EExd enclosure and 4…20 mA output
- Touch-screen display allows calibration or adjustment without the need for a hot works permit
- Accuracy of better than ±2 % full scale
- IP66 rated enclosure
- Low cost of ownership due to minimal maintenance
- Typical ranges available: 0…5 % up to 0…100 % (others gas dependent)
- Stability ±0.5 % per month (of range)
price by request
Naturally Ventilated Humidity Probes Weather Protection
- Easy-to-install protective shield
- Simple probe mounting
- Suitable for various probes ( Ø 15 and 25 mm)
- Multi-plate system for natural ventilation
price by request
Measuring and Monitoring differential Pressure in Clean Rooms, Food and Pharma
- Fast response time
- Different measuring ranges from ± 10 to ± 500 Pa
- 3 Analog, Ethernet or Modbus RTU outputs
- Analog input, freely scalable
- Relay
price by request