Products not found
The Model AQH-20 Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring the carbon dioxide concentration, air temperature, and humidity percentage in one device. A large backlit LCD display shows all three parameters simultaneously. The Model AQH-20 can display dew point or wet bulb temperatures in place of the ambient temperature. Minimum, maximum, and average readings are easily accessible through the function buttons. By pressing the hold key, the current values are held so that they can be recorded. An audible alarm warns the user that the current ambient conditions are becoming hazardous. The Model AQH-20 includes a hard carrying case and batteries.
Retail price from $384,65
Available
- Unit detects O2, ClO2, HCN and PH3
- Gas concentration (chlorine dioxide, hydrogen cyanide and phosphine) or percent oxygen displayed on a large, clear, backlit LCD
- Automatically records the last 50 alarm/test events while simultaneously recording peak gas readings or low O2 readings every three minutes in a periodic data log
- Rubberized armor housing and one-button operation for maximum durability and simplicity
- Easy alarm check, bump check, fresh air zero, and calibration
price by request
Available
The Marine 5 is your industry leader MED approved solution to multiple gas detection. This robust and accurate gas detector provides unrivalled protection in confined spaces, able to offer exotic gas detection.
price by request
Available
- Sensor options for CO, H2S, and O2
- Patented electrochemical sensors and MSA-built button sensors
- Stainless steel and solid electrolyte construction virtually eliminate sensor leakage
- Automatically records the last 25 alarm/test events and can communicate data by connecting to MSA Link via built-in IR communication port
- No-miss triple alarm system includes bright flashing LEDs, piercing audible alarm, and an internal vibrating alarm
- Rubberized armor housing and one-button operation for maximum durability and simplicity
price by request
Available
The Marine Tankscape (Shipsurveyor*) is versatile yet simple to use. It offers reliable Zone 1 atmosphere monitoring using infrared technology to detect up to 5 gases simultaneously. It was designed after extensive consultation with shipowners, ship managers, and shipping personnel. The result is a range of 7 instruments dedicated to the marine market.
price by request
Available
It operates over a wide temperature range using a variety of gas sensing technologies. Breakthrough XCell gas sensors with TruCal technology extends calibration cycles up to 24 months and actively monitors sensor integrity for ultimate peace of mind.
price by request
Available
The MM502 Gas Sampling & Detection System is most advanced. The MM502 overcomes common sampling system challenges, whilst enhancing efficiency and accuracy.
Engineered and tailored to the exact specifications you need to monitor ballast tanks, cofferdams, void spaces, inert cargo tank atmospheres, and other specified areas, the MM502 delivers unparalleled performance and reliability. With pre-sample lines that can be combined with up to 16 fixed point sensors, the system can even offer integrated pump room detection into one system.
price by request
Available
- Industry-leading speed & response: T90 ≤ 3 seconds even with splash guard installed
- No routine calibration required reducing maintenance costs
- Industry standard 4-20 mA output provides remote alarm and fault indication
- Multiple communication outputs provide complete status and control capability in the control room
- Heated optics eliminate condensation
- Dirty optics indication discriminates between true fault and cleaning requirements
- Fast calibration times reduce amount of cal gas required which lowers maintenance time and costs
price by request
Available
The MM2000 gas detector is an intelligent, addressable fixed system designed to protect against flammable, toxic, and asphyxiant gases.
Features:
- Simple commissioning & One-Person calibration
- Continuous monitoring at all points all of the time
- Guaranteed to be SOLAS and ISGOTT compliant
- Ability to monitor from 1 to 32 addressable sensors on a fully looped system
- Internal buzzer alarm for fault/alarm warnings to ensure you never miss a problem
- Bespoke system – manufactured in-house by our specialist team of engineers
price by request
Available
EGD detects combustible gas leaks from: 20ppm Hydrogen 50ppm Methane & Propane
Retail price from $222,69
Available
Boiler & Heat Pump Analyser up to 5 MW or 50mbar stack draught with KANE LINK
Retail price from $1 480,48
Available
- Sensitive to both small (ppm.meter) and large (LEL.meter) gas leaks using dual detection ranges
- Ideal for use in harsh environments (-55°C)
- Single detection beam improves accuracy and reduces drift
- Continuous self-check for fail-to-safe operation
- Multiple communication outputs (HART, Modbus, AMS support) provide complete status and control capability in the control room
- Unitized display makes it easy to operate
- Automatic gain control compensates for dirty optics, rain, and fog
price by request
Available
Vecsafe monitors oxygen and pressure levels in the Vapour Emission Control Systems (VECS). Each vapour line is monitored during loading operations for any over or under-pressurisation or an increase in oxygen levels approaching 8% volume in compliance with USCG and IMO legislation.
price by request
Available
RGD detects refrigerant gas leaks of: CFC, HFC, HCFC, R11, R22, R134a etc
Retail price from $249,05
Available
Industrial Boiler, Heat Pump, A/C & Refrigeration Analyser with KANE LINK
Retail price from $3 145,86
Available
Instantly detect pressurized gas leaks with this high-precision, omni-direction acoustic detector utilizing Gassonic® ultrasonic technology. Works even when traditional methods of gas detection are unsuitable or dependent on ventilation. The Observer-i UGLD provides an industry-leading detection range (up to 28 m) reducing the number of detectors required.
price by request
Available
Industrial Boiler, Engine & HVACR Analyser with KANE LINK
Retail price from $3 598,26
Available
- The indoor/outdoor PrimaX I Gas Transmitter detects toxic gases and oxygen
- Worry-free transmission with a 4-20 mA output signal and optional HART digital communication
- Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free
- Large LCD screen provides information at a glance
price by request
Available