Products not found
The Series TFP-GV Gas Flowmeters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A power adapter or mating cable assembly is required for operation.
Retail price from $543
Available
The Series SFI-800 Sight Flow Indicators & Transmitters are a low cost, durable rotor style flow indicator with optional Hall Effect magnetic output packages to combine visual confirmation of flow with optional remote flow monitoring. There are three output sensors available, the A-711 offering two pulsed voltage signals proportional to flow rate, the A-712 which outputs a linear 1 to 10 VDC signal proportional to flow rate, and the A-713 which offers two programmable open collector switch outputs.
Retail price from $105
Available
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2″ to 24″ and can be used with compatible liquids and gases.
Retail price from $473
Available
The Compact Series OMA Oxygen Flowmeter is made especially for medical applications and manually controlling flow from oxygen generators. Flow levels are kept stable by precision valve and knob adjustment. The low cost flowmeter is made from durable clear acrylic plastic. They easy-to-read scale is hot stamped into the acrylic so it will not wear off. The ball float is highly visible against the light blue background. Readings are repeatable within ±4% full scale accuracy.
Retail price from $69
Available
The DPF60 is a combination microprocessor-based digital rate indicator and integrating totalizer, 6 Digits Display, Relays Latch or Auto-Recycle, NEMA 4X.
- Front Panel Programming and Scaling
- Rate and Total in 1 Unit
- Remote or Front Panel Reset
- Relays Latch or Auto-Recycle
Retail price from $451
Available
The FL-500 Series in-line flow meters feature rugged construction, easy installation and direct reading flow rates for water and air at atmospheric and 90 psi pressures.
- Direct Reading in GPM, LPM, SCFM, and SLPM
- Scales for Air and Water
- Fluid is Always in View
- Mount in Any Position
Retail price from $266
Available
The 150 mm High/Low Alarm Flow Meter with Optical Sensor Switch is a noninvasive means for detection of a HI or LOW flow and is ideal for signaling an alarm or cutoff valve.
- HIGH or LOW Alarms
- Compact Design
- Liquid or Gas Applications
- High or Low Flow Cutoff Applications
Retail price from $823
Available
1/2″ 316 SS Turbine Flow Meter, Pulse Output, 0.08 to 0.4 GPM
- ±1% of Actual Flow Accuracy
- Includes 3-point NIST certificate
- Pressure Rating Up to 345 bar (5000 psi)
- Stainless Steel Construction
Retail price from $1 500
Available
The construction of the FV-200 vortex flowmeters is perfect for both aggressive chemicals and slurries or easily contaminated fluids like DI water.
- No Moving Parts
- Corrosion Resistant
- 6 to 51 mm (1.4 to 2′) Sizes
- High Temperature Option Available
Retail price from $818
Available
The FMG-550 Series Magmeters are heavy-duty, high-performance sensors in an adjustable, insertion configuration that can be used with a ball valve for hot-tap installations.
- Hot-Tap Version for Installation and Service Without System Shutdown
- Diagnostic Features Using Colored LED Lights
- Optional Detachable Waterproof Cable
- Output Choices of Frequency or 4 to 20 Ma
Retail price from $2 506
Available
The FPD3100 Series positive displacement flowmeters are affordable and accurate. The meter has good resolution and high accuracy at low flow rates.
- PPS Body
- Temperatures up to 80ºC (176ºF)
- NPT or BSP Threads
Retail price from $1 125
Available
FLR1000 Series flow sensors can measure low flow rates from 20 mL/min to 500 L/min. These sensors are suitable for industrial, commercial, and laboratory flow applications.
- 0 to 5 Vdc Linear Output Signal
- Power Input 12 Vdc or 24 Vdc (depending on the model)
- Ranges from 20 to 100 ml/min, 100 to 500 L/min
- 1% Accuracy for Liquids/3% Accuracy for Gasses
Retail price from $383
Available
The Series AFG Flow Grid is an outstanding simple yet accurate cost effective alternative to other duct mounted pressure sensors. Once installed and connected to a suitable measuring instrument, the device will provide years of trouble free monitoring of both air and gas flow. Installing the AFG Flow Grid is quick and easy, the AFG is supplied in kit form to allow both workshop and on-site installation into a wide range of square and circular ducts up to approximately 60″. The AFG Flow Grid is a fundamental pressure sensing device designed to transmit a continuous differential pressure signal. When this output is connected to a suitable measuring instrument (i.e., manometer, pressure transducer, etc.), it may be used to determine air velocity and volume flow rate.
Retail price from $548
Available
The Series DFMT Digital Paddlewheel Flow Transmitter provides instantaneous, as well as totalizing flow monitoring. The unit offers a user selectable 4 to 20 mA or pulse output with compact display.
Retail price from $1 095
Available
The Series GFT2 Flow Totalizer is a microcontroller driven device designed to linearize the flow meter and controller flow curve plus display the instantaneous flow rate, total, and accumulated total. The totalizer is intended to be used with analog flow meters and controllers with analog 0 to 5 VDC, 0 to 10 VDC, or 4 to 20 mA interface. RS-232 or RS- 485 digital interface is available.
Retail price from $661
Available
The Series LFM Polycarbonate Flowmeters are made of precision, injection molded polycarbonate bodies and fittings. This series consists of LFMA, LFMB, LFMC, LFMD, LFME and LFMF flowmeters with 3″ (76 mm), 6″ (152 mm), 5″ (127 mm), 6″ (152 mm), 8″ (203 mm) and 11″ (279 mm) respective scales. They feature dual, direct reading scales measuring in both GPM and LPM.
Retail price from $65
Available
The new Model FC-21 multifunction batcher and the Model FC-22 flow computer satisfy instrument requirements for a variety of flow meter applications.
- Custody Transfer with Audit Trail
- Liquid, Gas, Steam, and Heat Flow Equations
- Menu Selectable Hardware Inputs/Outputs
- Isolated Pulse and Analog Outputs Standard
Retail price from $1 155
Available
The FL-6000A Series of general purpose flowmeters is designed to provide economical, accurate flow rate indication for oil and water and can be mounted in any position.
- ±2% Full Scale Accuracy
- 1% Repeatability
- Direct Readings for Oil or Water
- Good Viscosity Stability
Retail price from $307
Available
The FMA-LP2600A controller uses a proportional valve coupled to the flow body to control flow using the integral PID loop controller. 0 to 5V output (4 to 20 mA optional)
- 130+ Gas Calibrations Including Pure and Mixed Gases
- Pressure, Temperature, and Mass Flow Simultaneously Displayed
- Easy-to-Use Pushbutton Interface
- NIST Traceability Standard
Retail price from $2 325
Available
The FTB370 Series flow turbines are designed for flow rate measurement of water and many water based liquids. They are compact in design and have a wide measuring range.
- Compact Design
- Wide Turn Down Ratio
- High Quality Sapphire Bearing
- Fixed Pulse Rate
Retail price from $631
Available
The FP6500-Series features Ruby bearings and a non-drag pick-off that give these adjustable insertion flow sensors the widest flow range of any of the paddlewheel types.
- Available in 316 Stainless Steel or Brass
- Installs in a Wide Range of Pipe Sizes From 3′ to 40′
- Excellent Low-Flow Performance
- Special Fittings Not Required
Retail price from $867
Available
The complete lack of moving parts of this insertion flow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of conditions.
- Durable
- Adjustable Depth
- Hot-Tap Available
- Brass or Stainless Steel
Retail price from $2 506
Available
FTB Series totalizers are used in applications where accurate measurement of (#2, 4 or 6) heating oil flow is required. The FTB-32 features a fully rotatable, easy-to-read face.
- For Flows Down to 0.26 GPH
- For #2, 4 or 6 Oil
- Direct Totalization in Engineering Units
- Scaled Pulse Output Available
Retail price from $680
Available
The S435 vortex flowmeter is the ideal choice for measuring steam due to its rugged construction, absence of moving parts and high temperature/pressure resistance.
Retail price from $2 285
Available