Products not found
The Series FBLT Flush Tip Submersible Level Transmitters measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a narrow 316 SS housing with PTFE coated flush diaphragm tip.
Retail price from $991
Available
Omega’s UXLR50 ultrasonic sensor measures distance up to 50 ft and is housed in a small potted enclosure for environmental durability and long life.
- Long range, short dead band
- Continuous and point level
- Adjustable by computer (PC) software, locally or remotely
- Narrow beam with adjustments to optimize performance Packaging & Performance
Retail price from $1 050
Available
The Series ULT Ultrasonic Level Transmitter provides non-contact measurement of liquid levels in an explosion-proof body. It is capable of measuring up to 32.8′ (10 m) with a PVDF sensor and 4-20 mA output.
Retail price from $1 878
Available
The Model ULSM Ultrasonic Level Sensor provides non-contact, continuous ultrasonic level measurement of fluids for medium range applications. Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions. The Model ULSM has failsafe logic that is easily configured to custom applications via free software removing the need for target calibration. Using the free software, the Model ULSM can be programmed to transmit an output signal as well as set the four relays for control applications. This rugged design comes with a NEMA 6P submersible enclosure rating to ensure a long lasting unit.
Retail price from $954
Available
The Model ULSS Ultrasonic Level Sensor provides non-contact, continuous ultrasonic level measurement of fluids for short range applications. Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions. The Model ULSS has failsafe logic that is easily configured to custom applications via free software removing the need for target calibration. Using the free software, the Model ULSS can be programmed to transmit an output signal as well as set the four relays for control applications. This rugged design comes with a NEMA 6P submersible enclosure rating to ensure a long lasting unit.
Retail price from $781
Available
The LV3000/LV4000 level sensors for continuous level measurement are flexible, cost-effective solution for applications involving liquids, pastes, and solids.
- Can Operate at High Temperatures and Pressure
- Unaffected by Coating Media or Aggressive Products
- Accurate and Reliable Measurement
- Easy Economical Installation
Retail price from $765
Available
The LVRD10 Series guided wave radar transmitters provide continuous level measurement with a 4 to 20 mA signal output. Offered in single rod, coaxial, or weight&cable probes
- Simple cut to length design in 3, 6, and 9.8 ft sizes, with tank mapping
- Fail-Safe Diagnostics with Selectable Signal Fail-Safe Output
- Recognition, Storage and Rejection of False Echo Signals
- Nema 4 (IP66) Aluminum Enclosure
Retail price from $864
Available
LVR500 level transmitters provide continuous level measurement with a 4 to 20 mA signal output
- Level Measurement Up to 2 m (6.5′) for High Pressure or Temperature applications
- Rugged 316 Stainless Steel Float Guide and Process Mounting Plug
- Polypropylene Junction Box Rated NEMA 4X (IP65) with Conduit Port and Terminal Strip
- Great for High Pressure Applications Up to 200 psi (13.8 bar)
Retail price from $1 270
Available
The LVU700 Series reflective ultrasonic transmitter provides level measurement up to 39.3′ with a 4-20 mA output and is configured via its push button display or software.
- Ultrasonic Liquid Level Transmitter with Reflective Technology™ measures reliably with condensation
- Offered in 6m (19.6’) and 12m (39.3’) measurement ranges
- Corrosion resistant PVDF transducer with IP68 PP enclosure
- Fail-safe diagnostics with selectable signal fail-safe outputs
Retail price from $882
Available
UMR14 Sensors contain a rugged transducer potted in a stainless steel housing. Outputs respond to measured distance and non-contact technology means nothing touches your materials
- Type 316 stainless steel housing (except PVC model)
- Ruggedized piezoelectric ultrasonic transducer
- Hardened & protected solid state electronics
- UV resistant, potted-in, PUR-jacketed cable
Retail price from $682
Available
The LVU2700 ultrasonic level transmitter provides continuous level measurement up to 32.8′ with a 4 to 20 mA output and is configured via free software and a USB adaptor.
- 4 Measurement Ranges from 3 to 10 m (9.8 to 32.8′)
- Auto Adaptive Filters Enable Plug and Play Operation
- Fast and Easy Configuration Via Free Software Download and USB Adaptor
- Narrow 5 or 7.6 cm (2 or 3′) Beam Width and Short 10 or 20 cm (4 or 8′) Dead Band
Retail price from $796
Available
The LVCN414 Series is a non-contact, ultrasonic level controller and transmitter that delivers reliable performance for small-tank fluid handling control solutions.
- Reliable, Non-Contact Replacement for Continuous and Switching Applications
- Compact Sensor Optimized for Small Tank Applications
- Control/Switch Functions for Pumps and Alarms
- PVDF Transducer for Corrosive Liquid Media
Retail price from $493
Available
The LVU800 Series 2-wire ultrasonic transmitter provides non-contact level measurement up to 32′ and is ideally suited for challenging ultrapure, corrosive, or waste liquids.
- Simple, Fast Setup with Pushbutton Calibration and LCD Display
- Four Measurement Ranges Available up to 10 m (32′)
- 6-segment LCD Display Indicates Air Gap or Liquid Level (Inch or Centimeter Units)
- 5 cm (2′) Minimum Beam Width for Applications with Restricted Space
Retail price from $930
Available
The Series CRF2 is a level transmitter providing a two-wire 4 to 20 mA output to indicate level of liquids, powders and bulk materials. State of the art sensing technology in the CRF2, using impulse RF admittance measurement provides excellent accuracy and stability. The CRF2 senses capacitance changes resulting from the height of the material in the tank between the probe and the tank wall. In non-metallic tanks or tanks that do not have the wall parallel to the probe a ground reference must be used.
Retail price from $1 221
Available
The LVU500 Series reflective ultrasonic level transmitter provides continuous level measurement up to9.8′ with a 4-20 mA output and four relays configured via web software
- Designed to handle condensing environments
- Offered in 1.5 m (4.9’) and 3 m (9.8’) measurement ranges
- Fail-safe diagnostics with 4 selectable relays and signal outputs
- Narrow 2” (5 cm) beam width for applications with limited space
Retail price from $578
Available
LVCN210 Series ultrasonic level transmitter and controller provides continuous level measurement up to 3 m (9.8′). The level sensor has 4 programmable relays.
- Level Detection, Switch and Control Functions Up to 3 m (9.8′)
- Fast and Easy Configuration Via Free Software Download and USB Adaptor
- Narrow 5.08 cm (2′) Beam Width and Short 10 cm (4′) Dead Band
- Four Programmable Relays
Retail price from $675
Available
PBLT2 and PBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.
Retail price from $786
Available
The USR03 is designed to address close up and shorter working distance requirements. Narrow beam width and shortened minimum range gives close-up measurement versatility.
- Short 1.75 inch dead band
- Unaffected by optical factors like color and transparency
- PC or button “teachable” setup
- Narrow beam with adjustments to optimize performance
Retail price from $717
Available
The MBLT Miniature Submersible Level Transmitter is only 0.63″ in diameter making it ideal for level monitoring in well and borehole applications. Constructed for years of trouble free service, the MBLT has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Featured in the MBLT is a precision ±0.10% or ±0.25% of full scale accuracy output, better than BFSL or BSL rated outputs used by most competitors. Lightning and surge protection (not guaranteed or covered by standard warranty) is included standard to stand up in harsh applications. MBLT comes with a choice of polyether polyurethane or ETFE cable materials and all are vented for barometric pressure compensation. Vent is covered with a maintenance-free filter preventing particulate or water droplets from entering the transmitter.
Retail price from $742
Available
The URL30 Series Ultrasonic Sensor is an ideal choice for applications that include level or volume, distance or proximity, dimensioning, roll diameter, or object detection.
- Long range, short dead band
- Unaffected by optical factors like color and transparency
- PC or button “teachable” setup
- Narrow beam with adjustments to optimize performance
Retail price from $824
Available
The high-pressure level switch is a displacer drive unit, which uses a single switch assembly for level alarm or control. These devices are designed for liquids with working pressures up to 250 bar and specific gravities of 0.40 and above. A permanent magnetic sensor is attached to the rotary switch drive. When the float/displacer rises correspondingly with the rise of the liquid, the corresponding sleeve will move into the range of the magnetic sensor and cause the switch to act accordingly
price По запросу
Available
ULM-200C is a non-contact ultrasonic water level meter with an integrated sensor and controller design. The user-centered design makes it easy to operate and requires less installation time.
price По запросу
Available
UQK400 float level controller is composed of float, connecting rod, magnetic sensor and magnetic switch and signal conversion mechanism. The change of the medium level in the container causes the relative displacement of the float, which drives the connecting rod and the iron core to move up and down to change the relative position of the magnetic sensor. Through the magnetic coupling, the micro switch or the reed switch is operated to achieve l
price По запросу
Available
A new generation, Capacitance based level transmitter for any type of liquids. Eltran is based on the physical properties of capacitor. The sensor selection is based on the type of liquid and can be measured from 100mm to 1500mm with rugged probe and above 1500 till 15000 flexible probe.
price По запросу
Available