Temperature Calibrators

50°C to 250°C temperature range melting point tester for up to 3 samples testing. Ramp Rate is 1 to 10°C/minute.

Universal RTD calibrator and thermometer. Automatically detects 2, 3 and 4 wire connections. PT100 and PT1000 curves. Rugged case included. Easy to read display and dial.

• Source and Read Mutiple RTD Curves Plus Ω
• Easy-to-Read Backlight Display
• Automatically Detects 2, 3 and 4 Wire Connections
• Calibrate Quickly With Automatic Output Stepping

100°C to 982°C temperature range cavity-type blackbody with 0.99 emissivity has a 22 mm target size and an RS-232 output.

Temperature Reference Probes for use in Reference Chambers are available for all standard calibrations with 12″, 24″, or 36″ leads.

-18°C to 149°C temperature range blackbody calibrator allows high stability of ±0.05°C calibration point for hot and cold cycle

The Portable Calibration Reference Chamber allows for the calibration of up to 6 of any temperature sensors at once. Includes a NIST Calibration Certificate.

Ambient +10°C to 400°C temperature range blackbody calibrator provides a fast heating time and a portable miniature design.

The High Precision Ice Point Calibration Reference Chamber allows for the calibration of up to 6 of any temperature sensors at once.

100°C to 1046°C high temperature range cavity-type blackbody with 0.99 emissivity has a 44.5 mm diameter aperture and an RS232 output.

Ambient + 10°C to 215°C temperature range blackbody provides high accuracy readings to ±0.5°C and good stability to ±0.1°C

66°C to 343°C temperature range blackbody calibrator has a built-in analog power controller with dial temperature readout.

• Low-Cost
• Portable
• Reference Signal for Pyrometers
• Built-in Analog Power Controller with Dial Temperature Readout

Ambient + 5°C to 450°C temperature range dry block has ±0.4°C high accuracy with well to well radial uniformity to 0.020°C.

Handheld millivolt and 11 thermocouple type calibrator and thermometer. Easily adjustable dials & rugged case.

• USB and RS232 Interface with Windows Software
• 11 Types of Thermocouples: K, J, T, E, R, S, N, L, U, B, and C (in °C, °F, or K), and mV Signal Output
• NIST-Traceable Calibration Certificate with 7 Data Points (Included)
• 2 Channels for Thermocouple Temperature Measurement (T1 and T2) with Offset Adjustment

The TCL series of Dry Block and Micro Bath calibrators feature Extremely High Accuracy and Stability with a Certificate of Calibration Included with every unit.

Handheld thermocouple temperature calibrator and thermometer with easily adjustable dials and rugged case design. Thermocouple signals J, K, T and E.

• 8-Point, NIST-Traceable Calibration Certificate
• Large 31/2 Digit Display
• Type J/K/T/E TC Calibrator and Thermometer
• Range -220 to 1372°C (-364 to 1999°F)

Dry block with temperature range from ambient +5°C to 400°C has ±0.6°C display accuracy and 0.15°C stability after 15 minutes.

Universal RTD calibrator and thermometer. Automatically detects 2 or 4 wire connections. PT100 and PT1000 curves. Rugged case included. Easy to read display and dial.

• Easy to Use
• Calibrate and Measure Most RTD Sensors
• Comes Protected With a Rugged Rubber Boot
• Calibrate Directly in Temperature (ºC or ºF)

-5 to 125°C temperature range dry block provides ±0.8°C accuracy with fast heating time. RS232 output and free SW. click here to see more features.

Automatically source and read K/J/E /T/R/S/B/N/G/C/D/L/U thermocouple signals and millivolt. Rugged case, 50hr battery life, large dial and 3 temperature recall settings.

• Resolution of 0.1°F and ºC Accurate to 0.2°
• Source and Read 14 T/C Types Plus mV J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel) -13.000 to 80.000 mV
• Instantly Select Three Outputs With Check Switch
• Easily Change T/C Types, Scale (°C and °F)

Hot point dry block has temperature range from ambient +22°C to 482°C with accuracy to ±0.8°C, stability to ±0.2°C and RS-232 output.

Calibrate and Source K/J/E/T/R/S/B/N/G/C/D/L/U/P thermocouple signals along with millivolt. 50hr battery life and storage of 3 temperature readings for instant recall.

• Source 14 Thermocouple Types
• Easy-to-Read Backlight Display
• Easily Change Thermocouple Types and Scale
• Calibrate Directly in Temperature (°C or °F)

Calibrate with simultaneous source identification and measurement. High resolution and accuracy. Select from 14 or 4 thermocouple signal types. Military standard durability.

• Handheld Thermocouple Calibrator with ±5 µV accuracy
• Resolution: 0.01°
• 10x Battery Life
• Simultaneous Source / Measure