Products not found
Series PCWS supply side or Series PCWR return side assemblies simplify piping and provide superior strength. Fully customizable with choice of valves, flow, and pressure controls; pressure and temperature gauges, flowmeters, and virtually any conceivable combination of connection sizes and types.
price by request
Available
Series GX Single-wall sight glass for liquids compatible with acrylic. 1/2″ – 3″ sizes, NPT or socket connections in PVC or polypro. Fluttering streamers optional.
price by request
Available
Series PR/PRH/PRHM Downstream pressure reducing valve features large area rolling diaphragm, ultra-smooth operation and isolated spring control. Molded and machined valves in 1/4” through 3” (for 4” consult factory) and metric pipe sizes in popular thermoplastic materials with a wide range of connection types. Proven design provides highest flow with minimal pressure droop. While some valves may be limited by size or material, most models provide set range of 10-125 PSI.
price by request
Available
Series SWT Pressure Switch with PTFE diaphragm, for pressures to 150 PSI. Versatile snap-action 16 Amp/3 terminal switch is standard; low deadband 3 Amp switch optional. For 25 Amp switch, consult factory. PVC, CPVC, PP or PVDF.
price by request
Available
Series PRHU Downstream pressure reducing valve features metal ion-free EPDM large area rolling diaphragm, ultra-smooth operation and isolated spring control. BCF spigots in 1/2″ – 3″ or 20 – 90mm sizes; Kynar 740 body and Class 100 clean/double bag procedure standard. Provides highest flow with minimal pressure droop among high purity regulators; set pressure range 10-125 PSI.
price by request
Available
- Pulsation Dampener smooths pump flow
- Surge Suppressor absorbs shocks and vibrations
- Water Hammer Arrestor eliminates dangerous pressure spikes caused by quick closing valves
- Inlet Stabilizer enhances pump performance and longevity
- Accumulator releases stored fluid during unwanted pressure drops
- Expansion Tank protects system from thermal volume increases
price by request
Available
Series GYW Double-wall sight glass for liquids compatible with Pyrex inner wall. 1 1/2″ – 8″ sizes, flange connections in PVC, CPVC, PVDF, PTFE, or polypro. Fluttering device optional.
price by request
Available
Plast-O-Matic thermoplastic calibration columns are a quick and convenient way to measure or verify pump flow rates, chemical dosing, or chemical feed systems with higher accuracy than competitive models. Designed for precise, efficient testing with a variety of installation options.
price by request
Available
Designed to accept most standard OSHA approved locks/shackles, Series MBVL is available as complete valve assembly or as kit for field retrofit. 1/2″ – 4″ sizes.
price by request
Available
Series RVDM features a primary rolling diaphragm and a secondary flat diaphragm which incorporates the Plast-O-Matic patented Fail-Dry design for added protection. The rolling diaphragm provides greater sensitivity than non-diaphragm style relief valves, and is ideal for all applications without vacuum on the outlet. 1/2″ – 1″ sizes in most popular thermoplastic materials and connections; 5 – 100 PSI set range (5 – 125 PSI on 1/2″ only).
price by request
Available
Double acting Air x Air or Fail-safe Air x Spring actuators designed for corrosive service. Features rugged plastic construction to NEMA 4X standards with direct manual override. Fail-safe valves can be normally-open or normally-closed. Most units can be hydraulically actuated.
For valves 3/8″ – 4″ sizes in PVC, CPVC, Natural Polypro, PVDF with FKM or EPDM. Available with NPT, socket, BSP, Sanitary, and other connection types.
price by request
Available
Double acting Air x Air or Fail-safe Air x Spring actuators designed for corrosive service. Features rugged plastic construction to NEMA 4X standards with direct manual override. Most units can be hydraulically actuated.
For valves 1/2″ – 2″ sizes in PVC or CPVC; 3″ & 4″ sizes in PVC, CPVC, Natural Polypro, PVDF. Available with NPT, socket, BSP, Flanges, and other connection types.
price by request
Available
Series ECWS supply-side or Series ECWR return side are express-built assemblies in the most popular configurations to simplify piping and provide superior strength. PVC or CPVC construction with EPDM seals and socket connections; the only selection necessary is the flowmeter range on the return side.
price by request
Available
Series GL Double-wall cylinder for liquids compatible with Pyrex inner wall. 1/2″ or 3/4″ sizes, NPT or socket connections in PVC, PTFE, or polypro. BSP sizes also available. Standard lengths are 1′, 2′; custom lengths available.
price by request
Available
Series GGMU Ultra-pure “zero deadleg” inline isolator in PVDF, Natural Polypro, or PVC with a variety of spigot or sanitary connections and gauge options.
price by request
Available
Pressure ranges from 30” vacuum to 200 PSI with 4-20 mA output signal and ±0.5% accuracy. Includes POM Gauge Guard as isolation barrier; 1/2″ FNPT process connection. This is a Specialty Custom product; please contact factory for price and availability. Minimum quantities may apply.
price by request
Available
Series UPR Downstream pressure reducing valve features non-shutoff elastomer-free design (pressure will equalize in a no-flow condition) and the ultimate purity levels, as verified by independent test labs. BCF spigots, flare, sanitary, and other connection types available. 1/4″ – 2″ or 20 – 63mm sizes; choice of Kynar 740 or PTFE body. High purity CDB-16 (8 hour hot / 8 hour cold DI rinse) procedure is standard; clean and double bag in class 100 (ISO 5) clean room. Ultimate purity with excellent flow performance; set pressure range 5-100 PSI.
price by request
Available
Series GGS Superior accuracy pressure or vacuum isolator with steel-reinforced gauge hub and a wide range of options, including acrylic shield, removable housing, choice of gauges and materials.
price by request
Available
Series GY Double-wall sight glass for liquids compatible with Pyrex inner wall. 1/2″ – 3″ sizes, NPT or socket connections in PVC or polypro. Fluttering streamers optional.
price by request
Available
Series ARV designed to expel large volume of air at system start up, then close bubble tight. Unique self-guided poppet seals more reliably than ball designs; does not deform under pressure and assures minimal emission of system liquid prior to sealing. Sizes from 1/2″ to 4″ in a wide range of materials and connection types.
price by request
Available
Series PRA/PRAM features two opposing large area frictionless rolling diaphragms. Process pressure is applied to one of the diaphragms; air pressure is applied to the other. Because the air pressure can be maintained with more accuracy than the force provided by a spring, the PRA/PRAM offers greater sensitivity and less variance from set pressure than any thermoplastic pressure regulator previously available.
price by request
Available
Series BSDA/BSDAM Compact, PTFE diaphragm valves in a complete range of materials, sizes and connection types, featuring no wetted metals or elastomers. Includes patented Fail-Dry early warning vent. The ultimate in high-purity on/off control.
price by request
Available
The CARD valve series is available in 1”, 2”, and 4” series (CARD100, CARD200, and CARD400 respectively). The valves are available in Geon PVC or Corzan CPVC plastic, and with Viton or EPDM seal materials. The valves are Normally Open (NO) when there is no pressure or liquid in the piping system. Process connections are NPT or socket. Vent side connection is NPT. For other material or connection requirements, please consult factory
price by request
Available
Series RVT/RVTX is a high capacity angle pattern valve for relief, bypass, backpressure and pump backpressure applications with excellent corrosion resistance. 1/2″ – 2″ sizes in most popular thermoplastic materials and connections; 5 – 125 PSI set range. 3″ size provides settings 5 – 100 PSI.
price by request
Available