Dwyer is a manufacturer of instruments for measuring pressure, temperature, level and many other parameters of process media. In addition to measuring instruments, Dwyer provides process control equipment. Dwyer is the holder of more than 650 technical patents, and this number is increasing every year, which demonstrates the great experience in the production of measuring and control equipment.
Manufacturer’s official website dwyer-inst.com
TEXAIR FZCO is an official distributor of DWYER and supplies control & measuring instruments to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
The Model A-709 Temperature Transmitter Enclosure can be used to mount our Series 651, 659 and Model TBU-00 transmitters to any of our 1/4″ diameter temperature sensors. The screw on enclosure cover can be quickly removed and has a chain to prevent it from getting lost. The Model A-709 comes with the necessary adapters and fittings for attaching the temperature sensor.
Retail price from 59,8 $
Available
The Series TE-OND/TE-RND/TE-OSA Outdoor Temperature Sensors are offered different configurations to increase measurement accuracy by reducing radiated heat effects. For applications where the north side of the building is accessible, the TE- OND/TE-OSA can be used to protect against low levels of radiated heat.
Retail price from 28,65 $
Available
Series 5 General Purpose Thermocouples are low cost and offered in a variety of configurations. Tip temperatures can be as high as 450°C (842°F) for fiberglass insulated wire, or 200°C (392°F) for FEP insulated wire. For higher temperatures limits, or cover head assemblies, see Series 8 Mineral Insulated Thermocouples.
Retail price from 36.25 $
Available
The Series S2-4 Weatherproof Surface Temperature Assembly is ideal for monitoring the temperature of distribution lines when it is not possible to penetrate the pipe. The strap-on connection quickly wraps around a pipe and can be securely tightened using a flat head screw driver. The twist-off housing cover reduces installation time. The housing has multiple knockout conduit holes which allows the installer to bring conduit to any side of the housing. The Series S2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from 110,4 $
Available
The Series 651 Temperature Transmitter is designed for use with 2 or 3 wire Pt100 RTDs or ungrounded Type K thermocouples. Thermocouple models 651TC are cold junction compensated, automatic 32 to 160°F (0 to 70°C) with upscale burnout.
Retail price from 188.85 $
Available
The Series TE-SNW Weather Resistant Surface Temperature Sensor non- intrusively measures the process temperature in hot and cold water loops in buildings. In order to work with most common building controllers, the output of the sensor can be chosen from 6 different RTD and Thermistor curves.
Retail price from 40,75 $
Available
INJECTION MOLDING NOZZLE TYPE
In-Melt type thermocouples and RTDs are designed to bolt into the injector nozzle and sense the temperature of the melt directly, and is rated to 450°C (900°F). The standard 3/8″ hex head stainless steel body has 3/8-24 NFT threads. The sensor tip extends 1/8″ beyond the end of the bolt assembly.
Retail price from 83.3 $
Available
The Series I2-4 Weatherproof Immersion Temperature Sensor is ideal for monitoring hot and chilled water lines feeding Air Handlers and Cooling Towers. The plastic housing has a 1/4 turn twist off cover to reduce installation time. The multiple knockouts allow for easy conduit access to any side of the housing. The Series I2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from 44,25 $
Available
Dwyer uses advanced computer modelling software to simulate real-world situations, creating more accurate measurement methods in its products. Innovative product design has been recognised by industry experts, including the ACHR Dealer Design Awards in the Testing and Monitoring category for 2014 and 2015. Dwyer has invested in state-of-the-art research and development centres to conduct best-in-class product testing and validation.
Founded in 1931, DWYER manufactures equipment for measurement, conversion and control – pressure, temperature, level, flow. Most of the instruments are known by their international brand names – such as Magnehelic and Spirahelic – differential pressure gauges; Photohelic – electrical contact gauges; RateMaster and MiniMaster rotameters, Visi-Float flow meters; Slack-Tube and Flex-Tube – U-tube gauges; Dwyer – pressure sensors with electrical contacts; Flotect – sensors, level and flow switches, Magnesense – differential pressure sensors.
