Home » Flow Switches » DWYER TDS thermal dispersion flow switch

DWYER TDS thermal dispersion flow switch

The Series TDS Thermal Dispersion Flow Switch offers solid state flow detection of non-coating liquids for pump and process protection. SPDT output allows for interfacing with remote PLC or relay control device. The adjustable switch point is factory calibrated at 0.2 fps with LED indication of flow and calibration status. Units feature selectable NO or NC operation and are not damaged by over-ranging flow velocities.

			int(5792)
NULL

Made in USA. brand DWYER, model TDS

International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.

Retail price from $442,7

Available

Founded in 1931, DWYER manufactures equipment for measurement, conversion and control – pressure, temperature, level, flow.

Only the best I&C brands

Our company is a UAE supplier of control and measuring instruments from well-known world brands

Discounts for organisations

We sell high-tech equipment at best prices. We provide really advantageous conditions for partners

Fast delivery across the Middle East

Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries

Professional advice on device selection

Our specialists are ready to advise you on any technical question. We can find an analogue of any device

Technical specifications of DWYER TDS

Service: Liquids.
Wetted Materials: Polypropylene/PPS or Polyvinylidene Fluoride.
Range: Range: 0.04 to 10 fps (1.2X10-2 to 3.05 m/s)
Temperature Limits: 32 to 140°F (0 to 60°C).
Pressure Limits: 150 psi (10 bar) @ 77°F (25°C), derated @ 1.667 psi (.113 bar) per °C above 25°C.
Repeatability: ±5% of setpoint.
Switch Type: SPDT.
Electrical Rating: 60 VAC/60 VDC @ 1 A.
Electrical Connections: 22 AWG 3-wire, 10 ft (3 m) length.
Process Connections: 3/4″ male NPT.
Mounting Orientation: Any orientation, for pipe sizes 3/4″ to 1-1/2″ use 3.0″ (7.6 cm) length switch; for 2″ to 16″ pipe sizes use 4.5″ (11.4 cm) length switch.
Setpoint Adjustment: 0.04 to 3 fps (1.2X10-2 to .91 m/s).
Setpoint Drift: 0.5% of setpoint.
Response Time: 1-10 seconds.
Viscosity Range: 1 to 200 centipoise.
Supply Voltage: 12 to 36 VDC.
Consumption: 50 mA (nominal).
Indication: LED for flow status.
Weight: 3 oz (94 g).
Agency Approvals: CE.

How to buy DWYER TDS

Model	Description	Price
TDS112	Thermal dispersion flow switch, PP/PPS wetted parts, 3.0″ (7.6 cm) length.	$442.70
TDS122	Thermal dispersion flow switch, PP/PPS wetted parts, 4.5″ (11.4 cm) length.	$464.40
TDS222	Thermal dispersion flow switch, PVDF wetted parts, 4.5″ (11.4 cm) length.	$621.00
TDS212	Thermal dispersion flow switch, PVDF wetted parts, 3.0″ (7.6 cm) length.	$703.80

Load More Items

User Guide and Instruction manual for DWYER TDS

You can request the necessary certificates, documentation, instructions and user guide for DWYER TDS using the special form.

Similar instruments and devices to DWYER TDS

DWYER BFM bulk flow monitor

DWYER AAFS adjustable air flow paddle switch

OMEGA FS-100-Series 3/4″ Flow Switches for Threaded Plastic Piping

OMEGA FLCN101 Flow/No Flow Single Sensor Controller With Strobe Alert

OMEGA FST200R-Series Flow Switch With Compact Relay Controller

OMEGA FLCN-111-Series Single Sensor Controller

ALRE WSERD Flow Switch

You can buy DWYER TDS in UAE at a price starting from 442,7 $ in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. DWYER TDS price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.