Scale range from -0.1 to 0.9 MPa (customizable). Set point accuracy from -30~+50 °C, ±1.0%FS (±10KPa) (gas phase). Degree of protection – IP65. Ambient conditions from -40°C to +60°C. Leakage rate – < 1 × 10-9 Pa-m3/s, relative humidity ≤ 95%RH. Contact type – microswitch. Output signal – RS485 and fibre optic. Protocol – ModBus RTU.
Made in Canada. brand LANSO, model ZMJ80XDR
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
price by request
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
Application of ZMJ80XDR Series Density Monitors
Features of ZMJ80XDR Series Density Monitors
| Scale range: | -0.1 to 0.9MPa (customizable) |
| Set point Accuracy: | –30~+50 ℃，±1.0%FS（±10KPa）（gas phase） |
| Indication accuracy: | +20±1℃，±1.0%FS（±10KPa,0~0.9MPa abs.） |
| +20±1℃，±1.5%FS（±15KPa,1.0MPa abs.） | |
| Sensor accuracy: | calibration point: +20±1℃，±0.8%FS（±8KPa） |
| –30~+50 °C，±1.0%FS（±10KPa） | |
| Degree of protection: | IP65 |
| Ambient conditions: | -40°C to 60°C |
| Leakage rate: | < 1 × 10-9 Pa·m3/s , Relative humidity ≤ 95%RH |
| Pressure connection: | M20 × 1.5, (customizable) |
| Location: | Bottom or back |
| Electrical connection: | Connect the plug when plugging, wire diameter
0.2…2.5 mm2 |
| Insulation properties: | Insulation resistance: >100 MW (500 V DC) |
| Withstand voltage: 2kV, 50/60 Hz 1 min (to case) | |
| Contact type: | Micro Switch |
| Impact rating: | 50g |
| Contact ratings: | 10(1.5)A,250V AC |
| 0.1 (0.05)A,250V DC | |
| Window: | Laminated safety glass |
| Weight: | 1.2kg |
| Pressure sensitive components: | bellows and Bowden tubes |
Main electrical performance indicators and specifications of the remote transmission part
| Power supply: | 24V DC |
| Power consumption: | < 2W |
| Communication mode: | RS485 |
| Protocol: | ModBus RTU |
| Baud rate: | 9600bps |
Anti-electromagnetic interference
| IEC61000-4-2: | level 4 (15kV) |
| IEC61000-4-3: | level 3 (10V / m) |
| IEC61000-4-4: | level 4 (4kV) |
| IEC61000-4-5: | level 4 (+/- 2kV) |
| IEC61000-4-6: | level 3 (10V) |
| IEC61000-4-8: | level 5 (100A / m) |
| IEC61000-4-9： | level 5（1000A/m） |
| IEC61000-4-10： | level 4（30A/m） |
Options of ZMJ80XDR Series Density Monitors
You can request the necessary certificates, documentation, instructions and user guide for LANSO ZMJ80XDR using the special form.
You can buy LANSO ZMJ80XDR in UAE at a favourable price in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. LANSO ZMJ80XDR price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
