This all-in-one portable water testing solution makes compliance with complex sewage discharge legislation easy. The kit requires no formal training and is the only all-in-one solution to guarantee complete compliance with the MLC 2006 and MARPOL ANNEX IV on-board water testing legislation.
Made in United Kingdom. brand Martek Marine, model Sewage Effluent Kit Max
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE. Delivery to other countries (Europe, North and South America, Asia, Africa) is discussed individually.
price По запросу
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
| Size | 60 x 40 x 37cm |
| Weight | 8.3kg |
| Kit Contents | Hard carry case Acidifying SE tablets (x300) Permanganate Value tablets (x300) Universal pH tablets (x100) Sterile sample containers (100ml, x3) Plastic test tubes (10ml, x2) Turbidity tube (13 inches) Test tube brush (12cm) Thermometer (x1) DPD free Chlorine (x500) PH Comparator disk 0-5mg (x1) Incubator (x1) Coliforms tests (x25) Disposable gloves (x100) Goggles (x1) Crushing rods (pack of 10) Bacterial plates (pack of 4, x10) |
| Turbidity and Suspended Solids | The Turbidity test uses a specially calibrated plastic tube. Test kit SP 304 includes a tube graduated at 30 to 500 turbidity units. The Royal Commission Standards for Effluents recommend that the suspended solids content of sewage effluent should not be more than 30 mg/l. |
| Temperature | Effluent discharge should always be close to ambient temperatures. |
| Coliforms | The coliform test is carried out by taking a sample of your sewage effluent and adding Sodium Thiosulphate and readycult. Once thoroughly shaken, you incubate the sample for 24 hours and 35°C. You then check for a colour change in the effluent sample, a change to blue/green indicates a presence of coliforms. Log result as present or absent. |
| Bacterial Plates | Take a small 1ml effluent sample and place it on the bacterial plate. Incubate the sample at 35°C for 48 hours and simply count the number of red colonies on the plates surface. You are looking for a result less than 100/250 CFU/ml depending on the vessel. |
| Free Chlorine | Take a sample of your sewage effluent, add a crushed DPD 1 tablet and comparing the sample effluent against the chlorine comparator disc. |
| Permanganate Value (PV) | The Permanganate Value test is a test for indicating the general quality of final effluents as to its acceptability for discharge.
PV of 0-10 = Excellent |
| PH test | The pH test is carried out with a Universal pH test tablet and a comparator wheel. The pH of final effluents should also fall within the 6 to 8. |
| Bacterial Plates | To convert the Permanganate Value (PV) for domestic sewage and effluent to probable BOD, COD and TOC values multiply by the following factors. The probable BOD can be calculated from the result of the turbidity test using the following formula: Probable BOD = Turbidity/2 + 5 The Royal Commission Standard for Effluents recommends a BOD value of not more than 20 mg/l. |
SIMPLICITY IN SEWAGE WATER TESTING
All applicable vessels will need to maintain the system in line with the effluent standards or risk detention. The Martek Marine Effluent Test Kit provides simple tests for Permanganate Value, pH, Suspended Solids, Probable BOD, COD and TOC. The kit provides all the necessary tests to guarantee compliance for all commercial vessels. Crews who carry out regular testing will be able to take corrective action which will keep efficiency high whilst keeping downtime to a minimum and reducing costs.
You can request the necessary certificates, documentation, instructions and user guide for Martek Marine Sewage Effluent Kit Max using the special form.
You can buy Martek Marine Sewage Effluent Kit Max in UAE at a price starting from По запросу $ in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email rop@texairmeasure.ae. Martek Marine Sewage Effluent Kit Max price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
See also: Ship Performance Products
