The iServer 2 virtual chart recorder offers an intuitive way to collect and display live sensor readings through a web-based user interface or by integrating the device into an existing Omega Link Ecosystem.
Made in USA. brand OMEGA, model iServer2-Probe
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
Retail price from $866.55
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
Standard – Environmental Probe Kit with LCD
The iServer 2 virtual chart recorder offers an intuitive way to collect and display live sensor readings through a web-based user interface or by integrating the device into an existing Omega Link Ecosystem.
The iServer 2 probe variant is packaged in a rugged, compact, stainless-steel housing designed for industrial applications and comes in variants that support different Omega Link Smart Probe types:
M12 Smart Probe Variants
| Part Number | iS2-THB-B | iS2-THB-ST | iS2-THB-DP |
|---|---|---|---|
| Screen | No Display | Display | Display |
| Sensor Type | Probe | Probe | Probe |
| I/O | No Relay, No DIO | Relay, DIO | Relay, DIO |
| Power | AC to 12 VDC Adaptor | AC to 12 VDC Adaptor | AC to 12 VDC Adaptor,PoE |
The iServer 2 web UI offers a myriad or configurable features to ensure the device operates at the preferred user preferences. Configurable features include selective data extraction, measurement and device traceability, local alarms, and adaptive transmission rates. Live charting provides real-time readings of probes attached to the iServer 2 unit.
The iServer 2 features 2 configurable digital I/O and relay ports(Standard and Deluxe models only). These can be used for a myriad of applications including driving relays or physical alarms. The iServer 2 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.
A fully configurable alarm system is available in the web UI to create events and thresholds that will trigger a notification should those scenarios be met. A modern notification system allows users to be notified via email or text.
The iServer 2 is simple to install and use, and features Omega’s iServer technology that requires no special software except a web browser. The iServer 2 connects to an Ethernet Network with a standard RJ45 connector and uses TCP/IP or Modbus TCP protocols to communicate. It is easily configured with a simple menu using a web browser and is password protected. From within an Ethernet LAN, the user simply types the hostname or IP address in any web browser, and the iServer 2 provides a webpage with the current readings.
The iServer 2 is great for monitoring temperature in applications such as clean rooms, computer rooms, HVAC systems, hospitals, laboratories, semiconductor fabs, electronic assembly, warehousing, museums, manufacturing, farm animal shelters, greenhouses, pharmaceutical, food processing and storage, and many more.
The iS2-THB-DP variant of the iServer 2 both offer a Power over Ethernet (PoE) feature that provides the device with sufficient power to operate when connected to a PoE Injector or router that supports Power over Ethernet.
The iServer 2 will continue to collect data for 96-hours when powered by a standard 9 Volt alkaline backup battery (included). A failure on the Ethernet network will not interrupt data recording.
Important Note: A fully charged 9-volt battery will allow the iServer 2 to continue logging up to 10,000 data points for a period of 96 hours. When the 10,000 logged data points have been exceeded while running on the backup battery, the oldest logged data point on the Smart Probe will be overwritten starting from the oldest data point saved on the Smart Probe. A logging interval of at least 35 seconds or longer will prevent the overwriting of data during the 96-hour period the battery is in use.
Omega Link compatible devices, such as the iServer 2, can be added to an existing Omega Link Ecosytem to provide data anytime, anywhere, through the Omega Link Cloud. The following Omega Link Smart Probes are supported:
| Part Number | Description |
|---|---|
| SP-003/SP-004 | Temperature, Humidity, Barometric Pressure, Dewpoint, Humidex, and Heat Index Smart Probe with discrete I/O |
| SP-005 | Temperature and RTD Smart Probe |
| SP-006 | Pressure Monitoring and Control Smart Probe |
| SP-010 | Load Cell Smart Probe |
| SP-014 | Process Monitoring Smart Probe |
| SP-016 | Heat Flux Smart Probe |
CAL-3 is available for iServer 2 M12 Models for temperature and humidity only by ordering the SKU’s below. For Barometric Pressure or additional calibration requirements, please contact Omega.
Available input ports will vary by iServer 2 model.
Ethernet (RJ45):1x port (Power over Ethernet available on qualifying models)
Supported Protocols:TCP, UDP, SNMP, SNTP, ARP, ICMP, DNS, and HTTP
Omega Link Smart Probe: 1x M12 8-Pin port
Digital I/O and Relays (Standard and Deluxe Models Only):Two contact inputs TTL 0.5 mA with 10k pull-up; one open collector output 150 mA @ 30 V DC
LED Indicators: 100 BASE-T, Network Link and Activity, Internet
Alarm I/O: Two contact inputs TTL 0.5 mA with 10k pull-up; one open collector output 150 mA @ 30 V DC
Sample Rate: 8 samples/second max
Memory Capacity and Sample Rate: The table below lists the lifespan of the internal storage before the 11 GB of storage is filled. Some Smart Probes come with more than one active sensor. These sensors can be individually enabled and disabled using Omega’s SYNC configuration software.
| Sample Rate | 4 Active Sensor |
| 1 second (max) | 2 years |
| 5 seconds | 12 years |
| 10 seconds | 20 years |
Management:Device and probe configuration and monitoring through embedded WEB server
Embedded WEB Server:Servers WEB pages containing real-time data and live updated gauge views and charts within definable time intervalsMECHANICAL
Dimensions of Base Device: 101.6 mm L x 155.6 mm W x 330 mm H (4 in. L x 6.13 in. W x 12.99 in. H) not including bracket and M12 connector
Material:Stainless Steel
Display: LCD 32 mm L x 93.5 mm W
Weight: 655 g (1.44 lbs.), including batteryPOWER
Power Input:9 to 12 V DC
Consumption: 4W
AC Power Adapter (Included) Nominal Output: 12 V DC @ 1.5 A
Power over Ethernet: IEEE 802.3AF, 44 V – 49 V, Power Consumption under 10 W
Input: 100 to 240 V AC, 50/60 Hz
Back-Up Battery: 9 V DC, alkaline. 96 hours at 5 seconds recording intervals and 1 second readingENVIRONMENTAL
Operating Temperatures – iServer 2
iServer 2 Unit:0 to 60°C (32 to 140°F)
Battery: -18 to 55°C (-0.4 to 131°F)
AC Power Adapter: 0 to 40°C (32 to 104°F)
Industrial Cable: -40 to 125°C (-40 to 257°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)GENERAL
Configuration: Internal Web UI
Software: : Access web server using any modern web browser such as Chrome, Edge, or Firefox on the same local network; Firmware upgrade from Internet; Export probe data log to CSV files
Agency Approvals: CE, UKCA, FCC (Part 15, Subpart B, Class B of the FCC rules)SP-003-1 PROBE ACCURACY SPECIFICATIONS(Included with iServer 2 M12 Smart Probe variants)
Temperature Range:-40 to 85°C (-40 to 185°F)
Accuracy at 25°C:±0.3°C (±0.6°F)
Response Time: Less than 1 second
| Product Number | Measurement Type | Number of Measurements | Input Type | Maximum Samples | Display | Power | Data Interface | Max Sampling Rate | |
|---|---|---|---|---|---|---|---|---|---|
|
IS2-THB-ST $866.55
|
Temperature, Humidity, Barometric Pressure
|
3
|
Probe (Included SP-003-1)
|
75M
|
4.3” LCD
|
AC Adaptor, 9V Battery Backup
|
Ethernet, USB
|
1 sample / second
|
|
|
IS2-THB-B $757.55
|
Temperature, Humidity, Barometric Pressure
|
3
|
Probe (Included SP-003-1)
|
75M
|
None
|
AC Adaptor, 9V Battery Backup
|
Ethernet, USB
|
1 sample / second
|
|
|
IS2-THB-DP $991.90
|
Temperature, Humidity, Barometric Pressure
|
3
|
Probe (Included SP-003-1)
|
75M
|
4.3” LCD
|
AC Adaptor, 9V Battery Backup, PoE
|
Ethernet, USB
|
1 sample / second
|
PoE
|
|
IS2-THB-B-CAL-3 $1,082.22
|
Temperature, Humidity, Barometric Pressure
|
3
|
Probe (Included SP-003-1)
|
75M
|
None
|
AC Adaptor, 9V Battery Backup
|
Ethernet, USB
|
1 sample / second
|
CAL-3
|
|
IS2-THB-DP-CAL-3 $1,417.00
|
Temperature, Humidity, Barometric Pressure
|
3
|
Probe (Included SP-003-1)
|
75M
|
4.3” LCD
|
AC Adaptor, 9V Battery Backup, PoE
|
Ethernet, USB
|
1 sample / second
|
PoE, CAL-3
|
|
IS2-THB-ST-CAL-3 $1,237.92
|
Temperature, Humidity, Barometric Pressure
|
3
|
Probe (Included SP-003-1)
|
75M
|
4.3” LCD
|
AC Adaptor, 9V Battery Backup
|
Ethernet, USB
|
1 sample / second
|
CAL-3
|
You can request the necessary certificates, documentation, instructions and user guide for OMEGA iServer2-Probe using the special form.
You can buy OMEGA iServer2-Probe in UAE at a price starting from 866.55 $ in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. OMEGA iServer2-Probe price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
See also: Data Loggers
