The P4 pressure pump is used for checking, adjusting and calibrating all kinds of pressure
equipment. It was specifically developed for low pressures up to 4 bar. It is also possible to generate negative pressure, but this is very dependent on the test chamber volume.
The pressure pump can be used for test items directly on location, thanks to its light weight and compact design.When the pressure pump is used, it needs to be connected to a reference gauge and to the test item
Made in Germany. brand SIKA, model Type P4
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
price by request
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
Whether for on-site use in the workshop, in the measuring and test room or lab, SIKA temperature calibrators can be used everywhere. A wide range of industries and various application areas are covered.
• assembly, commissioning
• manufacturing, production
• maintenance, service
• quality assurance, test equipment monitoring
• repair
Practical
The test pumps and pressure generators are developed so that all pressure systems to be tested can be adapted directly. The DUT is simply connected via the robust, industrial pressure hose with quick coupling and the adapters supplied. The reference sensor is mounted directly on the top of the pump using a positioning adapter.
The desired test pressure is first generated by means of the handles and then precisely adjusted with the fine adjustment valve. Thus, the same pressure level is present at both instruments. The pressure relief valve allows a stepless pressure reduction and ensures a precise and easy test run even when the pressure drops.
At the most basic level, the pressure is indicated by an analogue pressure gauge. In addition, easy-to-read digital pressure gauges or hand-held instruments can be used. By comparing the display value of the reference sensor and the measured value of the DUT, it is possible to check the accuracy or adjust the pressure gauge to be tested.
Mobile and independent
SIKA test pumps and pressure generators are ideally suited for mobile use. The low weight and compact design allow easy transport directly to the measuring point. The instruments are immediately ready for use and work without additional supply voltage. It is not necessary to carry nitrogen cylinders along or to connect to a compressed air network. The wear-free pressure generation is simple and smooth, regardless of ambient temperature and orientation by manual operation.
Basic and Solid version
The basic equipment of the Basic version of each test pump includes a suitable pressure hose. The hydraulic hoses are equipped with a self-sealing quick coupling. In the solid version, inch, conical or metric adapters are available for all common connection threads. The matching seal kit is also included in the scope of delivery. The transport case with moulded foam insert contains the complete equipment.
| Technical data | |
| Type | P4 |
| Pressure ranges
g Negative pressure g Positive pressure |
-0.3 bar (depending on test sample / reference)
4 bar |
| Pressure medium | Air |
| Connections | |
| Reference pressure gauge | G¼ female thread with PA hose (2 x 1 m) |
| Test sample | G¼ with quick coupling and pressure hose (1 m) |
| Basic | |
| Dimensions | Approx. 225 x Ø 55 mm |
| Weight | Approx. 980 g |
| Solid | |
| Dimensions (case) | Approx. 450 x 370 x 110 mm |
| Weight | Approx. 4.2 kg |
| + Adapter kit | Chrome-plated brass, G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼ |
| + Seal kit | PA flat gaskets and O-rings |
| For pneumatic test pumps | Order code | |
| Hose | Polyamid, 1 m, chromed cap nut G¼ (female) | EPPM040SCHLA01 |
| DIN adapter set | Chromed brass, 11 adapter, G¼ (female) – xxx | EPPM040ADAPT01 |
| DIN single adapter | Chromed brass, lasered, G¼ (male) -xxx | |
| G¼ A – G⅛ I | FHP011 | |
| G¼ A – G⅜ I | FHP012 | |
| G¼ A – G½ I | FHP013 | |
| G¼ A – NPT⅛ I | FHP014 | |
| G¼ A – NPT¼ I | FHP015 | |
| G¼ A – NPT½ I | FHP016 | |
| G¼ A – M12 x 1,5 I | FHP017 | |
| G¼ A – M20 x 1,5 I | FHP018 | |
| G¼ A – G⅛ A | FHP019 | |
| G¼ A – G¼ A | FHP020 | |
| G¼ A – G¼ I | FHP021 | |
| DIN seal set for DIN adapter | Different o-rings and thread tape seals in plastic box | EPPM040DICHT01 |
| reducing adapter P40 adapter set | Chromed brass, G¼ (male) – G⅛ (female) | EPPM040ADAPP40 |
| Dirt trap | Up to max. 35 bar | EME8IDT6001000 |
| Service kit seal set P40.2/ P60 | Internal main piston and valve seals | EPPM040DICHT02 |
| Fine adjust/ release valve | Complete valve system | EPPM040REGVE01 |
| Replacement valve P40.2/ P60 | Inlet and outlet valve incl. seals for replacement | EPPM040VENTIL01 |
| Case blue P4 | SIKA logo, foam lining and rigit foam inlay | XHP 180 |
| Case blue P40.2/ P60 | SIKA logo, foam lining and rigit foam inlay | EPPM040KOFFE01 |
| Case grey P40.2/ P60 | Neutral version, foam lining and rigit foam inlay | EPPM040KOFFE02 |
| Rotary union | Brass G¼ (male) – G½ (female) | EPPM040WIRBEL01 |
| For hydraulic test pumps | Order code | ||
| Hose (1 m) | Polyamide, MiniMess®, chromed cap nut MM1620 (female) | XHP104 | |
| Hose (2 m) | Polyamide, MiniMess®, chromed cap nut MM1620 (female) | XHP117 | |
| High pressure hose P1000.2 | Chromed cap nut with 2 adapters G¼ (male) – G¼ (female) | EME8HP10000000 | |
| Pressure gauge connection | MiniMess®, bulk head, chromed steel, MM1620 (male) – G¼ (female) | XHP103 | |
| Testpoint | MiniMess®, coupling, chromed steel MM1620 (male) – G¼ (male) | XHP214 | |
| Rotary union | MiniMess® direct connection, chromed steel M1620 (female) – G¼ (female) | EME81620I-G14I | |
| DIN adapter set | Stainless steel, 11 adapter, G¼ (male) – xxx | EPPM700ADAPT01 | |
| DIN single adapter | Stainless steel, lasered, G¼ (male) – xxx | ||
| G¼ A – G⅛ I | FHP033 | ||
| G¼ A – G⅜ I | FHP034 | ||
| G¼ A – G½ I | FHP035 | ||
| G¼ A – NPT⅛ I | FHP022 | ||
| G¼ A – NPT¼ I | FHP036 | ||
| G¼ A – NPT½ I | FHP023 | ||
| G¼ A – NPT⅜ I | FHP024 | ||
| G¼ A – M12 x 1,5 I | FHP037 | ||
| G¼ A – M20 x 1,5 I | FHP038 | ||
| G¼ A – G⅛ A | FHP039 | ||
| G¼ A – G¼ A | FHP040 | ||
| G¼ A – G¼ I | FHP041 | ||
| DIN seal set for DIN adapter | Different o-rings and thread tape seals in plastic box | EPPM040DICHT01 | |
| Cone seal Ref. P, Q, R, J | >1500 bar | EME8AECONO000 | |
| Hydraulic oil | plastic bottle, 0.25 litre | EZHÖ0100000000 | |
| Case blue P700.3 / P1000.2 | SIKA logo, foam lining and rigit foam inlay | XHP 212 | |
| For digital pressure gauges | Order code | ||
| All types | DAkkS certificate (10 measuring points, no vacuum) | EKDRUCK000000D | |
| SIKA works certificate (10 measuring points) | EKDRUCK000000W | ||
| Type P | RS 232 C cable | EME8AEQCCABLE0 | |
| Linearisation type P (0.05%): accuracy 0.025 % full scale (from ≥ 10 bar) | On request | ||
| Type P / J | Software calibration (PresKal) | EME8AEPCSW0000 | |
| Software monitoring (DEMO) | EME8AESWTDEMKA | ||
| Type J | Software Datalogger (Analyzer Light) | EME8AESWANALLI | |
| Type L-Ex / E-Ex / D-Ex | Oil and greasefree version up to max. 200 bar, 60 °C | On request | |
You can request the necessary certificates, documentation, instructions and user guide for SIKA Type P4 using the special form.
You can buy SIKA Type P4 in UAE at a favourable price in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. SIKA Type P4 price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
