+441225535040

Mon-Fri: 8:00 - 18:00 UAE

Email:

TOPAS DDS 560 Dilution System

Dynamic Dilution System DDS 560 for variable-adjustable dilution of aerosols at variable air flow rates

			int(881)
NULL
		

Made in Germany. brand TOPAS, model DDS 560

International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.

price by request

Available

Available

Advantages

Only the best I&C brands

Our company is a UAE supplier of control and measuring instruments from well-known world brands

Advantages

Discounts for organisations

We sell high-tech equipment at best prices. We provide really advantageous conditions for partners

Advantages

Fast delivery across the Middle East

Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries

Advantages

Professional advice on device selection

Our specialists are ready to advise you on any technical question. We can find an analogue of any device

Description of TOPAS DDS 560

The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 with possibility to adjust the dilution factor.

The adjusted dilution factor is shown on a display. In the applied principle that corresponds to the standard VDI 3491-15, particles are removed from the sample according to the specified dilution ratio – the particle size distribution remains unchanged.

Optical particle counters show a maximum measurable aerosol concentration due to their operating principle. If this limit is exceeded major errors cannot be excluded, for example because of coincidence. In case of clean room testing or laminar flow box testing according to VDI 2083 measurements of high upstream concentrations are required. Conventional clean room particle counters are unable to measure at such high concentrations.

By placing the dynamic dilutor DDS 560 before a particle measuring device, e.g. the LAP 322: Laser Aerosol Particle Size Spectrometer, the aerosol concentration can be reduced by a factor selected by the user. Thus, the required upstream concentration can be diluted to a concentration which is within the measuring range of the particle counting device.

The operating principle is based on the splitting of the total volume flow into a so-called bypass volume flow and a capillary volume flow. By means of an HEPA-filter all the particles are removed from the substantially larger bypass volume stream. The particle concentration of the smaller capillary volume stream remains unchanged. These two flows are eventually brought together again. The dilution factor is determined by the ratio of the capillary volume flow to the total volume flow. Both volume flow rates are continuously measured. The volume flow ratio is calculated and shown on the display. The total flow rate of the DDS 560 is set by the inlet volume flow of the particle counter. The user can adjust the desired dilution ratio with a control valve in the bypass line.

BENEFITS

  • infinitely variable dilution of aerosols
  • infinitely variable sample flow
  • monitoring and visualisation of sample flow and dilution ratio
  • characteristics of the gas phase of the aerosol (e.g. humidity) are maintained
  • self-contained system (i.e., no external air supply necessary, no exhaust air flow)

APPLICATIONS

  • validation and test of clean room equipment
  • checking HEPA- and ULPA-filters
  • filter media verification
  • aerosol research
  • verification of aerosol generators and powder disperser

Technical specifications of TOPAS DDS 560

Parameter title Unit Value
purpose of conditioning dilution of aerosols
sample condition, outlet diluted aerosol
setting parameter dilution factor
setting range 5 … 370 (depending on aerosol flow rate, see product sheer)
setting resolution 1
setting method manual
aerosol, volumetric flow rate L/min 0,5 … 3,0 (continously variable)
sample condition, inlet non-diluted aerosol
power supply 12 V DC, 300 mA (via power adapter)
hose connector mm Ø 8
material, capillary brass
environmental condition, max. counterpressure kPa ± 35
dimensions (w × h × d) mm 300 × 200 × 140
weight kg 2,9

ACCESSORIES

  • set of straight adapter R3 and elbow adapter R4 for aerosol outlet
  • replacement HEPA-Filter capsule

User Guide and Instruction manual for TOPAS DDS 560

You can request the necessary certificates, documentation, instructions and user guide for TOPAS DDS 560 using the special form.

You can buy TOPAS DDS 560 in UAE at a favourable price in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email . TOPAS DDS 560 price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.