Products not found
- The indoor/outdoor PrimaX I Gas Transmitter detects toxic gases and oxygen
- Worry-free transmission with a 4-20 mA output signal and optional HART digital communication
- Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free
- Large LCD screen provides information at a glance
price По запросу
Available
Advanced portable single-gas, personal monitor for Carbon Dioxide
- Dual button operation
- Event logging
- Data logging
- Easy-to-read LCD display
price По запросу
Available
The Macurco RD-VRF Refrigerant Gas Detector is designed to provide continuous refrigerant monitoring in VRF (Variable Refrigerant Flow) applications as well as other similar applications. The RD-VRF Refrigerant Gas Detector comes standard with 2 alarm levels providing advanced warning via low detection alarming and notification to activate two onboard relays that can be used to control valves to isolate or shutdown refrigerant supply lines, engage exhaust fans, provide notification alarms, and communicate to a Building Management System (BMS). The RD-VRF comes standard with Modbus RS-485 and optional BACnet communication.
price По запросу
Available
Flame simulators are often used by industry to perform detector testing during commissioning and periodic system testing. The TXP-FDE simulators are inexpensive, lightweight and simple to use. The modern ergonomic design, with alignment markers, allows accurate, fast and convenient detector performance verification. Suitable for use in hazardous areas, the TXP-FDE flame simulators can be used at distances of up to 23 feet (7 meters) from the detector.
price По запросу
Available
Test boilers with stack draught over 50 mbar with high suction pump
price По запросу
Available
- Dual source design provides redundancy and reliable, uninterrupted performance
- Heated optics prevent condensation buildup
- 4–20 mA analog output
- Easy connection using stainless steel junction box
- SIL 2 design provides safety system integration capability
- 316 stainless steel, IP 67-rated, rugged housing protects unit from environmental extremes
price По запросу
Available
Advanced, easy-to-use, 4-gas monitor for worker protection in hazardous environments. The ergonomic PM400 diffusion gas monitor simultaneously detects up to four gases, including hydrogen sulfide (H 2 S), carbon monoxide (CO), oxygen (O2 ) and combustibles (LEL). AimSafety’s PM400 is easy to use and delivers continuous visibility of gas concentrations for faster, more informed decisions that help protect workers and operational assets which can increase revenue and productivity.
price По запросу
Available
- Field replaceable smart sensor
- Event logging
- User selectable settings (Default to industry standards) via four-button interface
- Analog/digital output options
- 5 A SPDT and 0.5A relays to control fans, valves, louvers, horns and strobes
- Intuitive calibration process
- Remote Sensor (up to 2 per transmitter)
price По запросу
Available
The TXP-FDE UV/IR-HD detects fires and explosions extremely quickly allowing mitigation steps to be initiated more rapidly and limit event escalation.
price По запросу
Available
- Measuring Range 0 – 100% LEL
- Outputs
3-Wire, 4-20 mA current source, HART 7 protocol compatible
3 relays: 2 alarm, 1 fault (2A @ 30 VDC) - Protection Rating Dual IP66 and IP67
- Temperature Range -40°C to 75°C (-40°F to 167°F)
price По запросу
Available
Advanced, easy-to-use, multi-gas monitor with built-in pump for confined space entry and worker protection in hazardous environments
price По запросу
Available
Wireless Transmitter
- Robust 900 MHz
- Operates on “D” lithium battery (Std.)
- Optional 12-24 VDC power board
- Dual sensor capable w/ integral & remote sensor options
- Magnetic mount option
price По запросу
Available
The TXP-FDE UV/IR detects fires and explosions extremely quickly allowing mitigation steps to be initiated more rapidly and limit event escalation.
price По запросу
Available
- The indoor/outdoor PrimaX P Gas Transmitter detects toxic gases, oxygen and combustible gases
- Worry-free transmission with a 4-20 mA output signal and optional HART digital communication
- Optional configurable Alarm and Fult relays
- Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free
- Large LCD screen provides information at a glance, while three LEDs give clear status indication
- Isolated outputs version available allowing for a separate power supply and output signal to a PL
price По запросу
Available
Provides Carbon Monoxide Gas Detection in residential, multi-family. Options available:
- CM-E1: Rectangle Housing
- CM-E1-RF: Round Flush Mount
- CM-E1-RS: Round Surface Mount
price По запросу
Available
The TracXP TXP-WCR (Wireless Controller Receiver) is available with 900MHz frequency to meet your communication requirements. Each TXP-WCR may be equipped with single or dual gas sensors and transmit two of the 32 maximum channel values to the controller and/or wireless alarm relay.
price По запросу
Available
The TracXP TXP-FDE IR3-HD triple IR flame detector ensures the highest immunity to false alarms and provides an ultra-fast response, high performance, and reliable detection of all types of hydrocarbon fires (visible and non-visible).
The IR3-HD’s high definition camera allows clear imaging of fire and personnel at 100ft (30m). Video recording of one-minute pre-event and up to three minutes post-event provides visual documentation of the event.
price По запросу
Available
- Gas-specific Harmonic Fingerprint detection eliminates false alarms and prevents plant shutdowns
- SimuGas automated function checks are recorded daily and eliminate need for manual intervention
- Tuneable lasers scan more narrow portion of spectrum where water interference from weather conditions are minimized
- Bluetooth wireless technology and SITE software
- Senscient ELDS lasers are hard on fog, rain, and snow
- Fastest responding device for safety critical ventilation zone and cross duct applications
price По запросу
Available
Provides Combustible / Heating Gas Detection in residential, Multi-family, and commercial office environments.
price По запросу
Available
The TracXP TXP-C64 controller provides alarm and display functions for up to 64 inputs simultaneously. Economic configuration and/or expansion of the system is accomplished with 16, 32, 48, or 64-channel display modes and 16-channel I/O modules, allowing the TXP-C64 to accommodate changing applications within your facility.
price По запросу
Available
The TracXP TXP-FDE IR3 triple IR flame detector ensures the highest immunity to false alarms and provides an ultra-fast response, high performance, and reliable detection of all types of hydrocarbon fires (visible and non-visible). The detector addresses slow-growing fires as well as the fast eruption of fire using improved triple IR (IR3) technology.
price По запросу
Available