- stranded Cu wire : 2×0,22 mm2
- 9 mm wide tip suitable for mounting to flat surfaces with M4 screw
- material: stainless steel 1.4541
Products not found
Temperature sensor suitable for measurement of liquid and gaseous media. Tight connection of the sensor and thermowell prevents leakage of installation and enables adjustment to the thickness of insulation layer. This sensor has a spring-loaded replaceable measuring insert. Adequate for various applications, mainly on ships and vessels.
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
Retail price from $82
Read more
Available
The Series I2-4 Weatherproof Immersion Temperature Sensor is ideal for monitoring hot and chilled water lines feeding Air Handlers and Cooling Towers. The plastic housing has a 1/4 turn twist off cover to reduce installation time. The multiple knockouts allow for easy conduit access to any side of the housing. The Series I2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $44
Read more
Available
Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.
- flexible protection hose, stainless,
- round (K), fl at (P), tapered (S) tips
- bayonet fi tting with connector – nickel-plated brass
- material: stainless steel 1.4541
Retail price from $57
Read more
Available
Mineral insulated sensor with strengthened sheath suitable for measurement of liquids, semifluid masses or loose materials with high density or flow in conditions of great vibrations.
- connection head type MA IP54, – 40÷100ºC
- temperature transmitter can be mounted in a connection head
- material: stainless steel 1.4541, 1.4571 and INCONEL
Retail price from $68
Read more
Available
LIMATHERM TOP-226 Immersion RTD Pt100/Pt500/Pt1000 -50 to 180 ºC for Heat Meters And Heating Systems
Temperature sensor suitable for measurement of liquid and gaseous media, mainly in systems for energy consumption billing.
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type MA, IP54 -40÷100ºC
- sheath material: acid-resistant steel 1.4541
Retail price from $83
Read more
Available
Temperature sensor suitable for temperature measurement of liquid and gaseous media. Built-in LED display enables local temperature reading.
- Temperatura range -200÷550ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type XDI-80, IP65 – 20÷70ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
Retail price from $267
Read more
Available
The Series I2-1 Immersion Temperature Probes are designed to monitor the hot and chilled water lines throughout a building’s water distribution loop. The multiple temperature sensor outputs allow these sensors to connect to virtually any digital building controller. The Series IW2 stainless steel thermowells allow the temperature sensors to be replaced without draining the water line. The temperature sensors are available in 4″ and 6″ insertion lengths.
Retail price from $26
Read more
Available
Miniature, angular Pt100 sensor suitable for temperature measurement of small parts of machines and devices where precision is required.
- TOPMK-1 unsheathed resistor
- material: stainless steel 1.4541
Retail price from $36
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media, mainly in systems for energy consumption billing.
- stranded Cu wire 2×0,25 mm2 with double silicone insulation
- outer thermowell for sensor mounting in pipelines
- sheath material: brass
Retail price from $34
Read more
Available
Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.
- Temperatura range -200÷150ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
Retail price from $87
Read more
Available
The Series I2-2 General Purpose Immersion Temperature Sensor is ideal for monitoring hot and chilled water lines throughout a building or mechanical room. The plastic housing is in the shape of a standard junction box with multiple knockouts for easy conduit access. The locking cover prevents unauthorized occupants from tampering with the temperature sensor. The Sensor I2-2 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $71
Read more
Available
Miniature, angular Pt100 sensor suitable for temperature measurement of small parts of machines and devices where precision is required.
- TOPMK-2 sheathed resistor
- material: stainless steel 1.4541
Retail price from $36
Read more
Available
Temperature sensor suitable for measurement in hard-to-reach places and in applications requiring the use of flexible sensors with small diameters, good vibration and shock resistance, and low thermal inertia.
- mounting elements: nickel-plated brass and stainless steel
- straight or angular version
Retail price from $70
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media, mainly in systems for energy consumption billing.
- stranded Cu wire 2×0,25 mm2 with double silicone insulation
- mounting in special seats of a valve, tees
- sheath material:brass
Retail price from $40
Read more
Available
Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.
- Temperatura range -200÷600ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
Retail price from $91
Read more
Available
The Series TE-WSS Stainless Steel Wall Plate Temperature Sensor measures the ambient air temperature in classrooms and industrial environments.
Retail price from $12
Read more
Available
Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead wire and rotary nut.
- thread G⅛
- stranded Cu wire 2×0,22 mm2 or 4×0,22 mm2 with double silicone insulation
- material: stainless steel 1.4541
Retail price from $45
Read more
Available
Cable sensor can be equipped with plug for connection with portable temperature meters.
- performance with head MA
- PVC hand grip max. operating temperature 80°C
- with transmitter 4÷20 mA (LTT-03J)
- material: stainless steel 1.4541
Retail price from $69
Read more
Available
Temperature sensor with handgrip and pointed tip suitable for measurement of various types of meat and cold meat . It has an attestation issued by National Institute of Hygiene(PZH) for usage in contact with food because of the special materials it is made of.This sensor is terminated with miniature plug that enables its connection to portable temperature meter TES.
- steel or tefl on hand grip
- suitable for food industry
- National Institute of Hygiene (PZH) attestation
- sheath material: acid-resistant steel 1.4541
Retail price from $52
Read more
Available
Temperature sensor applied in industrial pipelines, pressure and other tanks for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.
- Temperatura range -200÷150ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type MA IP54 – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
Retail price from $83
Read more
Available
The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required on the immersion sensors.
Retail price from $10
Read more
Available
Temperature sensor suitable for measurement of machine and device outer surface, especially their bodies, blocks, etc. For the purpose of mounting the sensor only threaded hole and M4 screw is needed.
Retail price from $36
Read more
Available
Cable sensor can be equipped with plug for connection with portable temperature meters.
- performance with head MA
- PVC hand grip max. operating temperature 80°C
- with transmitter 4÷20 mA (LTT-03J)
- material: stainless steel 1.4541
Retail price from $69
Read more
Available
Temperature sensor with handgrip and pointed tip suitable for measurement of various types of meat and cold meat . This stainless steel sensor has attestation issued by National Institute of Hygiene (PZH) for usage in contact with food.
- stainless steel 1.4541 hand grip
- suitable for food industry
- National Institute of Hygiene (PZH) attestation
- sheath material: acid-resistant steel 1.4541
Retail price from $45
Read more
Available