Products not found
Sensor applied for temperature measurement of movable and exposed to vibrationparts of machines and devices.
- mineral insulated thermocouple (K), material: Inconel 600
- connector and tip material: stainless steel 1.4541
Retail price from $50
Available
Temperature sensor suitable for surface measurement. Hot junction has bigger surface of heat reception because of the connected copper plate or eyelet. This improves sensor contact with the surface.
- cable tip with eyelet, clamped hot junction, surface mounting with M4 or M5 screw
- square or round plate, brazed hot junction
- thermocouple stranded wire: 2×0,22 mm2
Retail price from $25
Available
Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead wire.
- operating temperature -30÷85°C
- screwed plug M12-4 pin – IP67
- material: stainless steel 1.4541
Retail price from $84
Available
Mineral insulated sensor with strengthened sheath suitable for measurement of liquids, semifluid masses or loose materials with high density or flow in conditions of great vibrations.
- connection head type MA IP54, – 40÷100ºC
- temperature transmitter can be mounted in a connection head
- material: stainless steel 1.4541, 1.4571 and INCONEL
Retail price from $68
Available
This sensor is suitable for temperature measurements of media with slow temperature changes. Sensor sheath made of heat-resistant and creep-resistant steel enables temperature measurement of e.g. Burned gases and exhaust gases in furnaces.
- Temperatura range: -40÷1200ºC K
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type AA IP53, – 40÷100ºC
- connection head type DAAW, IP65, -40÷100ºC (for transmitters)
- sheath material: acid-resistant steel 1.4541, 1.4762 and 15Cr25T
- mineral insulated W2 1 or 2 J, K, N Ø6 mm
- control hole for 4 mm for thermocouple
Retail price from $102
Available
Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.
- Temperatura range -40÷600ºC TC
- sensing element: J thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
Retail price from $91
Available
Temperature sensor with low thermal inertia suitable for temperature measurement of processes, where fast response to temperature change of the measured medium is needed. Sensing element is placed directly in the sheath.
- Temperatura range -40÷700ºC TC
- sensing element: J thermocouple
- connection head type MA IP54, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
Retail price from $66
Available
Temperature sensor designed to measuring motor windings. Its construction allows for quick and simple assembly.
Retail price from $24
Available
The Series BTT-E/N Temperature Transmitter offers transmitter output signals with the same form and fit as our popular Series TE-E/N thermistor and RTD sensors for Building Automation and HVAC installations. Duct mount, immersion and OSA models are available on the Series BTT page.
Retail price from $66
Available
The Series I2-4 Weatherproof Immersion Temperature Sensor is ideal for monitoring hot and chilled water lines feeding Air Handlers and Cooling Towers. The plastic housing has a 1/4 turn twist off cover to reduce installation time. The multiple knockouts allow for easy conduit access to any side of the housing. The Series I2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $44
Available
Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of a bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.
- brass, atmospheric pressure
- insulated hot junction SO
- additional sheath, up to 1MPa, stainless steel 1.4541
Retail price from $45
Available
Sensor suitable for temperature measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire.
- thermocouple wire: 2×0,22 mm2
- hot junction: insulated SO, grounded SP
- material: stainless steel 1.4541
Retail price from $40
Available
Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead wire and rotary nut.
- thread G⅛
- stranded Cu wire 2×0,22 mm2 or 4×0,22 mm2 with double silicone insulation
- material: stainless steel 1.4541
Retail price from $45
Available
Temperature sensor suitable for surface measurement. Hot junction has bigger surface of heat reception because of the connected copper plate or eyelet. This improves sensor contact with the surface.
- cable tip with eyelet, clamped hot junction, surface mounting with M4 or M5 screw
- square or round plate, brazed hot junction
- thermocouple stranded wire: 2×0,22 mm2
Retail price from $25
Available
Mineral insulated sensor with strengthened sheath suitable for measurement of liquids, semifluid masses or loose materials with high density or flow in conditions of great vibrations.
- connection head type MA IP54, – 40÷100ºC
- temperature transmitter can be mounted in a connection head
- material: stainless steel 1.4541, 1.4571 and INCONEL
Retail price from $63
Available
Temperature sensor suitable for measurement of air or gas flowing in ventilation channels, applied mainly for ventilation and air-conditioning systems. Resistor placed in perforated light alloy sheath, joined to connection box made of anti-static material. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.
- perforated sheath – P, closed-end sheath – Z
- humidity max. 85% RH
- housing: material polycarbonate, IP67
- material: stainless steel 1.4541
Retail price from $47
Available
Temperature sensor with special construction suitable for measurem
- temperature measurement in autoclaves
- suitable for food industry
- National Institute of Hygiene (PZH) attestation
- sheath material: acid-resistant steel 1.4541
Retail price from $138
Available
This sensor is suitable for temperature measurements of media with slow temperature changes. Sensor sheath made of heat-resistant and creep-resistant steel enables temperature measurement of e.g. Burned gases and exhaust gases in furnaces.
- Temperatura range: -40÷1200ºC N
- sensing element: N thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type AA IP53, – 40÷100ºC
- connection head type DAAW, IP65, -40÷100ºC (for transmitters)
- sheath material: acid-resistant steel 1.4541, 1.4762 and 15Cr25T
- mineral insulated W2 1 or 2 J, K, N Ø6 mm
- control hole for 4 mm for thermocouple
Retail price from $102
Available
Measuring insert in the pipe, rigid sheath is used as a replaceable element of temperature sensors. Insert design enables its installation in the connection head and pressing insert tip to the bottom of the sensor thermowell.
- Temperatura range -200÷550ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- sheath material: acid-resistant steel 1.4541
Retail price from $46
Available
Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.
- Temperatura range -40÷600ºC TC
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
Retail price from $91
Available
Temperature sensor with low thermal inertia suitable for temperature measurement of processes, where fast response to temperature change of the measured medium is needed. Sensing element is placed directly in the sheath.
- Temperatura range -40÷700ºC TC
- sensing element: K thermocouple
- connection head type MA IP54, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
Retail price from $66
Available
Temperature sensor designed to measuring motor windings. Its construction allows for quick and simple assembly.
Retail price from $24
Available
The Model TBU-00 Temperature Transmitter is a high precision temperature transmitter designed to easily mount in most temperature sensor instrument enclosures. The universal input reduces inventory while the micro-USB port facilitates easy configuration, and calibration in the lab or in the field. The versatile TBU model allows for selection and configuration of input type, measurement range, and calibration. The output can be set as either direct 4 to 20 mA, or reverse 20 to 4 mA, through easy to use configuration software.
Retail price from $153
Available
The Series I2-1 Immersion Temperature Probes are designed to monitor the hot and chilled water lines throughout a building’s water distribution loop. The multiple temperature sensor outputs allow these sensors to connect to virtually any digital building controller. The Series IW2 stainless steel thermowells allow the temperature sensors to be replaced without draining the water line. The temperature sensors are available in 4″ and 6″ insertion lengths.
Retail price from $26
Available