The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required on the immersion sensors.
Made in USA. brand DWYER, model TE
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
Retail price from $10,1
Available
Founded in 1931, DWYER manufactures equipment for measurement, conversion and control – pressure, temperature, level, flow.
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
For variable air volume applications, the Series TE can be configured to have 8′ plenum rated cable with flying leads. Standard units come with 4″ leads with an integral terminal block to eliminate carrying extra wire nuts. For housing models, multiple knockouts provide easy conduit access to any side of the housing. The 1/4 turn lid comes with a chain to prevent it from being lost during installation.
For models with resistive thermistors or RTD outputs, please see Resistance vs. Temperature Table.
PRODUCT APPLICATIONS
FEATURES
| Model | Description | Price |
|---|---|---|
| TE-DFG-A0444-00 | Air Duct Temperature Sensor, 4 inch probe, 10K Ohm Type III Thermistor, GP housing. |
$18.45
|
| TE-DFG-A0844-00 | Air Duct Temperature Sensor, 8 inch probe, 10K Ohm Type III Thermistor, GP housing. |
$18.45
|
| TE-DFG-B0444-00 | Air Duct Temperature Sensor, 4 inch probe, 10K Ohm Type II Thermistor, GP housing. |
$18.45
|
| TE-DFG-B0844-00 | Air Duct Temperature Sensor, 8 inch probe, 10K Ohm Type II Thermistor, GP housing. |
$18.45
|
| TE-DFG-B1244-00 | Air Duct Temperature Sensor, 12 inch probe, 10K Ohm Type II Thermistor, GP housing. |
$18.45
|
| TE-DFN-A0444-00 | Air Duct Temperature Sensor, 4 inch probe, 10K Ohm Type III Thermistor. |
$10.10
|
| TE-DFN-A0448-00 | Air Duct Temperature Sensor, 4 inch probe, 10K Ohm Type III Thermistor, 8 foot plenum cable. |
$13.55
|
| TE-DFN-A0648-00 | Air Duct Temperature Sensor, 6 inch probe, 10K Ohm Type III Thermistor, 8 foot plenum cable. |
$13.55
|
| TE-DFN-B0444-00 | Air Duct Temperature Sensor, 4 inch probe, 10K Ohm Type II Thermistor. |
$10.10
|
| TE-DFN-B0448-00 | Air Duct Temperature Sensor, 4 inch probe, 10K Ohm Type II Thermistor, 8 foot plenum cable. |
$13.55
|
| TE-DFN-B0648-00 | Air Duct Temperature Sensor, 6 inch probe, 10K Ohm Type II Thermistor, 8 foot plenum cable. |
$13.55
|
| TE-DFN-B0844-00 | Air Duct Temperature Sensor, 8 inch probe, 10K Ohm Type II Thermistor. |
$10.10
|
| TE-DFN-B0848-00 | Air Duct Temperature Sensor, 8 inch probe, 10K Ohm Type II Thermistor, 8 foot plenum cable. |
$13.55
|
| TE-DFN-F0448-00 | Air Duct Temperature Sensor, 4 inch probe, 20K Ohm Thermistor. |
$13.55
|
| TE-TNS-N043N-00 | Stainless steel thermowell with 1/2″ NPT process connection, 4″ length |
$18.55
|
| TE-TNS-N044N-12 | Thermowell, 4″ length, 1/2″ NPT internal connection, 3/4″ NPT external connection, 304SS. |
$20.40
|
| TE-TNS-N044N-14 | Thermowell, 4″ length, 1/4″ NPT internal connection, 1/2″ NPT external connection, 304SS. |
$22.95
|
| TE-TNS-N063N-00 | Stainless steel thermowell with 1/2″ NPT process connection, 6″ length |
$18.55
|
| TE-TNS-N064N-12 | Thermowell, 6″ length, 1/2″ NPT internal connection, 3/4″ NPT external connection, 304SS. |
$24.50
|
| TE-TNS-N064N-14 | Thermowell, 6″ length, 1/4″ NPT internal connection, 1/2″ NPT external connection, 304SS. |
$24.50
|
| TE-TNS-N083N-00 | Stainless steel thermowell with 1/2″ NPT process connection, 8″ length |
$22.20
|
| TE-TNS-N094N-12 | Thermowell, 9″ length, 1/2″ NPT internal connection, 3/4″ NPT external connection, 304SS. |
$39.40
|
| TE-TNS-N094N-14 | Thermowell, 9″ length, 1/4″ NPT internal connection, 1/2″ NPT external connection, 304SS. |
$41.00
|
| TE-TNS-N123N-00 | Stainless steel thermowell with 1/2″ NPT process connection, 12″ length |
$26.05
|
| TE-TNS-N124N-12 | Thermowell, 12″ length, 1/2″ NPT internal connection, 3/4″ NPT external connection, 304SS. |
$58.35
|
| TE-TNS-N124N-14 | Thermowell, 12″ length, 1/4″ NPT internal connection, 1/2″ NPT external connection, 304SS. |
$59.85
|
| TE-TNS-N183N-00 | Stainless steel thermowell with 1/2″ NPT process connection, 18″ length |
$32.85
|
| TE-TNS-N253N-00 | Stainless steel thermowell with 1/2° NPT process connection, 2-1/2° length |
$18.55
|
| TE-TNS-N254N-12 | 2-1/2″ SS Thermowell with 1/2″ NPT internal and 3/4″ external thread. |
$21.80
|
| TE-TNS-N254N-14 | 2-1/2″ SS Thermowell with 1/4″ NPT internal and 1/2″ external thread. |
$24.00
|
| EXAMPLE | TE | IBN | A | 04 | 4 | 4 | 12 | Series TE-IBN-A0444-12 Immersion Probe, 10K type 3 thermistor, 4″ probe length, 1/4″ probe diameter, 4″ flying leads, with 1/2″ NPT connection. |
| SERIES | TE | Duct and Immersion Building Automation Temperature Sensor | ||||||
| MOUNTING CONFIGURATION | DFN DFG DFW IBN IBG IBW |
Duct Flange Probe Only (not w/ Connection 12,14) Duct Flange In Housing (not w/ Connection 12,14) Duct Flange NEMA 4X Housing (not w/ Connection 12,14) Immersion Probe Only Immersion in Housing (not w/ Connection 00) Immersion NEMA 4X Housing (not w/ Connection 00) |
||||||
| SENSOR TYPE | A B C D E F G H I J K L M P Q |
10K Type III Thermistor 10K Type II Thermistor 3K Ohm Thermistor PT100 Ohm RTD PT1000 Ohm RTD 20K Thermistor 1.8K Thermistor 5K Thermistor 100K Thermistor 2.252 Thermistor NI 1000 Ohm RTD Balco NI 1000 Ohm RTD PT100 Ohm RTD 1/10 DIN (3-wire) PT1000 Ohm RTD 1/10 DIN (3-wire) 10k Ohm Type 3 Thermistor w/11K Ohm Shunt |
||||||
| PROBE LENGTH | 25 04 06 08 12 18 |
2.5″ 4″ 6″ 8″ 12″ 18″ |
||||||
| PROBE DIAMETER | 4 | 1/4″ double encapsulated | ||||||
| TERMINATION | 1 2 3 4 5 6 7 8 |
4″ Flying leads w/female connector Molex recept 4″ Flying leads w/male connector Mate-N-Loc plug 4″ Flying leads spade terminals 4″ Flying leads terminal block 8′ Plenum cable w/female connector Molex recept 8′ Plenum cable w/male connector Mate-N-Loc plug 8′ Plenum cable spade terminals 8′ Plenum cable |
||||||
| FITTINGS | 00 12 14 |
None (Integral) 1/2″ NPT Compression Fitting 1/4″ NPT Compression Fitting |
You can request the necessary certificates, documentation, instructions and user guide for DWYER TE using the special form.
You can buy DWYER TE in UAE at a price starting from 10,1 $ in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. DWYER TE price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
