The complete lack of moving parts of this insertion flow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of conditions.
Made in USA. brand OMEGA, model FMG900
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
Retail price from $2,506.00
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
Insertion Magnetic Flow Meter
The complete lack of moving parts of this insertion flow sensor is the source of its reliability. There is no rotor to stop turning in dirty water and there are no bearings to wear out. Brass and stainless steel models withstand a variety of temperature, pressure, and chemical conditions. Reverse flow output and immersibility are optional. A rapidly reversing magnetic field is produced in the lower housing. As the fluid moves through this field, a voltage is generated that is measured and translated into a frequency signal proportional to flow rate. This square wave signal can be sent directly to a PLC, control or converted to 4 to 20 mA with the FTB700-T shown below (optional). A modular system of electronics can be attached directly to the flow sensor or remotely mounted. The FMG900 series can provide full indication of rate and total with the (optional) FTB700-D or just a 4 to 20 mA output with the (optional) FTB700-T blind transmitter. The adaptor fitting of the standard unit is a male NPT, and can be directly threaded into ordinary saddles or threaded weld fittings. The hot tap versions include an isolation valve, allowing hot-tap installation, or installation and removal under pressure. Hot tap units include the appropriate installation valve.
| Flow Range LPM (GPM) | ||
|---|---|---|
| Pipe Size | Min Flow | Max Flow |
| 3 | 23 (6) | 1666 (440) |
| 4 | 42 (11) | 2964 (783) |
| 6 | 95 (25) | 6670 (1762) |
| 8 | 167 (44) | 11,860 (3133) |
| 10 | 261 (69) | 18,530 (4895) |
| 12 | 375 (99) | 26,687 (7050) |
| 14 | 507 (134) | 36,325 (9596) |
| 16 | 662 (175) | 47,443 (12,533) |
| 18 | 840 (222) | 60,050 (15,863) |
| 20 | 1,037 (274) | 74,134 (19,584) |
| 24 | 1,495 (395) | 160,749 (28,200) |
| 30 | 2,336 (617) | 166,800 (44,064) |
| 36 | 3,361 (888) | 240,192 (63,452) |
| Product Number | Category | Velocity Range | Accuracy | Max Operating Pressure | Max Process Temperature | Wetted Materials | Media Type | Output Signal | Supply Power | Display | Compatible Fittings | Pipe Size Range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
FMG903 $1,698.83
|
Meter
|
0.28 to 20 FPS
|
±1%
|
200 psi
|
93 °C (200 °F)
|
316 SS, Hastelloy, PVDF, EPDM
|
Conductive Fluids
|
Amplified Square Wave
|
12 to 24 Vdc
|
No Display
|
Standard 1 1/2″ NPT Tee Adaptors, Customer Supplied
|
3 to 10″
|
|
FMG901 $1,664.36
|
Meter
|
0.28 to 20 FPS
|
±1%
|
200 psi
|
93 °C (200 °F)
|
Brass, Hastelloy, PVDF, EPDM
|
Conductive Fluids
|
Amplified Square Wave
|
12 to 24 Vdc
|
No Display
|
Standard 1 1/2″ NPT Tee Adaptors, Customer Supplied
|
3 to 10″
|
|
FMG902 $1,882.09
|
Meter
|
0.28 to 20 FPS
|
±1%
|
200 psi
|
93 °C (200 °F)
|
Brass, Hastelloy, PVDF, EPDM
|
Conductive Fluids
|
Amplified Square Wave
|
12 to 24 Vdc
|
No Display
|
Standard 1 1/2″ NPT Tee Adaptors, Customer Supplied
|
10 to 48″
|
|
FMG904 $1,850.04
|
Meter
|
0.28 to 20 FPS
|
±1%
|
200 psi
|
93 °C (200 °F)
|
316 SS, Hastelloy, PVDF, EPDM
|
Conductive Fluids
|
Amplified Square Wave
|
12 to 24 Vdc
|
No Display
|
Standard 1 1/2″ NPT Tee Adaptors, Customer Supplied
|
10 to 48″
|
|
FMG905 $2,134.66
|
Meter
|
0.28 to 20 FPS
|
±1%
|
200 psi
|
93 °C (200 °F)
|
Brass, Bronze, Hastelloy, PVDF, EPDM
|
Conductive Fluids
|
Amplified Square Wave
|
12 to 24 Vdc
|
No Display
|
Standard 2″ NPT Tee Adaptors, Customer Supplied
|
3 to 10″
|
|
FMG906 $2,265.85
|
Meter
|
0.28 to 20 FPS
|
±1%
|
200 psi
|
93 °C (200 °F)
|
Brass, Bronze, Hastelloy, PVDF, EPDM
|
Conductive Fluids
|
Amplified Square Wave
|
12 to 24 Vdc
|
No Display
|
Standard 2″ NPT Tee Adaptors, Customer Supplied
|
10 to 48″
|
|
FMG907 $2,909.04
|
Meter
|
0.28 to 20 FPS
|
±1%
|
200 psi
|
93 °C (200 °F)
|
316 SS, Hastelloy, PVDF, EPDM
|
Conductive Fluids
|
Amplified Square Wave
|
12 to 24 Vdc
|
No Display
|
Standard 2″ NPT Tee Adaptors, Customer Supplied
|
3 to 10″
|
|
FMG908 $2,890.68
|
Meter
|
0.28 to 20 FPS
|
±1%
|
200 psi
|
93 °C (200 °F)
|
316 SS, Hastelloy, PVDF, EPDM
|
Conductive Fluids
|
Amplified Square Wave
|
12 to 24 Vdc
|
No Display
|
Standard 2″ NPT Tee Adaptors, Customer Supplied
|
You can request the necessary certificates, documentation, instructions and user guide for OMEGA FMG900 using the special form.
You can buy OMEGA FMG900 in UAE at a price starting from 2,506.00 $ in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. OMEGA FMG900 price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
See also: Flow meters
