Products not found
Program, record, analyze, and control flow rates of various gases with Series DMF Digital Mass Flow Controller. Controllers are designed with straight tube sensors with restrictor flow elements to ensure laminar gas flow for accurate and repeatable results. Series DMF are unaffected by temperature and pressure variations.
Retail price from $3551,1
Available
LG magnetic flow meter is suitable for conductive medium with conductivity greater than 5μS/cm and with wide nominal diameter range. It is also suitable for various conductive environment conditions where is no pressure loss, with a variety of power supply modes and signal output. It uses standard RS-485 serial communication interface and support international common standards MODBUS-RTU communication protocols, GPRS and other wireless and wired communication networking methods. It can also provide wireless meter reading system (computer management software and database) that can be accessed by remote network.
price by request
Available
Mass flow meter that meets the requirements of scientific research. It is possible to switch between different gases using a sensor without having to enter conversion factors.
Flow measurement range: 0.5 ~ 2000 cm³/min (SCCM); 5 ~ 5000 l/min (standard); digital interface available: RS485 and analog: 0~5 V / 4～20 mA.
price by request
Available
QTLD magnetic flow meter, also known as electromagnetic flow meter or mag meter, is widely used because less obstruction, cost-effective and accurate measurement. Electromagnetic flow meter don’t have any moving parts to wear down, reducing the need for maintenance or replacement. Flowmeters are available with a variety of inserts, electrodes and sizes to suit different conductive fluids.
price by request
Available
Mass flow meter for high-quality measurement processes. The device features a wide temperature and pressure range. The flow meter is compatible with digital and analog signals and has high overload capacity and resistance to electromagnetic interference. Flow meter without touchscreen display.
price by request
Available
The Sanitary Electromagnetic Flowmeter is also called hygienic magnetic flow meter and tri-clamp magnetic flow meter. It is a food grade flow mter and ideal for food, beverages, beer, milk and pharmaceutical industries. Sanitary flow meter can meet the hygienic demand and achieve accurate and reliable flow measurement.
price by request
Available
QTLD/T tri-clamp magnetic flow meter is designed for sanitary applications, size is DN15-DN200, the sensor is SS304 or SS316 and lined with PFA. With tri-clamp, the magnetic flow meter can be installed and torn down easily to clear, it meet the strict requirements of food-processing and pharmaceutical industries.
price by request
Available
Stable mass flow meter for integration into industrial equipment.
- Customizable flow range available
- High accuracy (traceability available): ±0.5% ~ ±1.0%
- Compatible with multiple communication interfaces, supporting both digital and analog signals
- Configurable for ultra-low / high temperatures, high pressures, and low pressure loss
- Comprehensive functionality
price by request
Available
Aimag A electromagnetic flow meters is a products that developed for sewage, water, wastewater flow measurement. Widely used in metering and custody transfer. And can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions. The diameter of the electromagnetic flowmeter ranges from DN6 to DN3000.
price by request
Available
QTLD/W wafer electromagnetic flow meter is designed with flangeless structure for minimum size and weight. Eliminate gaskets and prevent moisture ingress with an all-welded sensor. No moving parts, which reduced the maintenance and repair with an obstructionless design. Alignment rings are available to install easily.
price by request
Available
A flow meter with a compact and lightweight design, featuring high measurement accuracy based on the laminar pressure drop principle. The device has an innovative removable screen with magnetic mounting for flexible positioning.
price by request
Available
Slurry magnetic flowmeter is specially designed for heavy-duty applications such as pulp & papermaking industries, slurries & sludges, mining industry, sewage and other industries.
price by request
Available
QTLD/C insertion electromagnetic flow meter is used to measure the flow of conductive liquids. It is available for use in pipes ranging in size from DN100 to DN3000 It can configure thread or flange ball valve to be hot-tapped, which allows sensor to be installed and retracted from process piping without shutting down the process.
price by request
Available
Aimag C Electromagnetic flowmeter is specailly designed for corrosive liquid, such as acid, sulfuric acid, acetic acid, niteric ascid, brine, sea water, alcohol, ammonia liquid ect. Aimag C flow meter use chemical resistant electrodes and liner, and can withstand 40Mpa high pressure flow meter.
Aimag C is best chemical-resistant flow meter for corrosive liquid. The diameter of the electromagnetic flowmeter ranges from DN6 to DN3000.
price by request
Available
QTLD/D battery-powered electromagnetic flow meter is an ideal flow measurement device for water and wastewater systems located at remote sites.
price by request
Available
Aimag D clamped electromagnetic flowmeter is specially designed for mediums with limited installation space. And it is widely used in flow measurement of raw water, drinking water, process water and sewage.
price by request
Available
QTLD/F partially-filled flowmeter is composed of converter, flow sensor and level sensor. The user only needs to enter the diameter of pipe, the non-full pipe flowmeter will automatically calculate the flow rate, and automatically display the instantaneous flow, total flow, velocity, height, etc. It can measure liquid volume min 10% of full pipe. It is especially suitable for the needs of municipal rainwater, waste water, sewage discharge and irrigation.
price by request
Available
Vortex flowmeter has no moving parts, simple layout of measuring elements, reliable function and long service life. The volume flow of the vortex flowmeter is not affected by thermal parameters such as temperature, pressure, density or viscosity of the fluid being measured. It usually does not need to be calibrated on its own. It can measure the flow of liquid, gas or steam. The resulting pressure loss is small. In addition, the vortex flowmeter has the advantage of high accuracy.
price by request
Available
QTLD/M mini magnetic flow meter is an economical option for small pipe size compared with other process connection, it includes transmitter and sensor, Which enjoy the advantages of small and compact, no moving parts, maintenance-free, save the installation space and reduce freight costs etc.
price by request
Available
Aitex E-type vortex flow meter is a steam vortex flow meter with excellent reliability and performance. ARTang Aitex E vortex flow meter adopts unique signal processing technology, and has better stability, accurate measurement. ARTang provides a wide range of products to meet all customer requirements.
price by request
Available
QTLD/R reduced bore electromagnetic flow meter is ideal for these applications with zero upstream or downstream piping as they can better handle distorted velocity flow profiles arising from the pipe networks, allowing total flexibility in installation for demanding applications compared with full bore magnetic flow meter. It can increase velocity and flow if it’s low flow.
price by request
Available
Temperature & pressure compensation vortex flowmeter adopts Karman vortex street principle, and the sensor has built-in piezoelectric crystal and integrated temperature and pressure measurement function, which can measure gas temperature and pressure, ensure more accurate volume or mass flow.
price by request
Available
QTLD/L tri-clamp magnetic flow meter is designed for sanitary applications, size is DN15-DN200, the sensor is SS304 or SS316 and lined with PFA. With tri-clamp, the magnetic flow meter can be installed and torn down easily to clear, it meet the strict requirements of food-processing and pharmaceutical industries.
price by request
Available
The Series GFM2 Gas Mass Flow Meter is an ideal choice for the measurement of flow rates of a wide variety of gases. Unit can be calibrated for a variety of gases with user selectable 0 to 5 VDC or 4 to 20 mA and two relay outputs and programmable totalizer that indicates total gas quantity.
price by request
Available