The FTB-900 Series is a low cost Liquid Turbine Flow Meter with an amplified square wave pulse output available in 9sizes covering flow ranges between 0.176 to 880 GPM (6.66 to 3331 LPM)
Made in USA. brand OMEGA, model FTB900
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
Retail price from $1,033.77
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
1/2″ Turbine Flow Meter, 304SS, Pulse Output, 6.6 GPM
The FTB-900 Series is a low cost Liquid Turbine Flow Meter with an amplified square wave pulse output available in 12 sizes covering flow ranges between 0.176 to 880 GPM. The FTB-900 Series Turbine Flow Meters are designed to meet the demands of the most rigorous flow measurement applications. The meter features a 304 stainless steel housing and rotor support, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and 316SS bearings. These materials help the meter to maintain accuracy and mechanical integrity when measuring the corrosive and abrasive fluids found in many industries.
When liquid flows through the casing of the sensor, the impulse of fluid will provide the blade with a rotation moment as there is an angle between the blade of the impeller and the flow direction. The blade will rotate as the friction moment and the fluid resistance are overcome, and it will reach a stable speed when the moments are at balance. Under certain conditions, the rotation speed of the blade will be in direct proportion to the flow velocity. Due to the magnetic conductivity of the blade, when located in the magnetic field generated by the signal detector (made of permanent magnet steel and coils), the rotating blade will cut the magnetic lines and periodically change the flux through the coil, thereby inducing electrical impulse signals at both ends of the coil. The induced signals, after being amplified and rectified will form a continuous rectangular impulse wave with certain amplitude which may be remotely transmitted to a display instrument indicating the instant flow and the cumulative flow of fluid. Within a certain range of flow, the impulse frequency f is in direct proportion to the instant flow of fluid flowing through the sensor.
| Product Number | Category | Media Type | Flow Range | Accuracy | Output Signal | Max Operating Pressure | Max Process Temperature | Wetted Materials | Process Connection Type | Process Connection Size | Display | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
FTB-904-P $1,033.77
|
Meter
|
Liquid
|
0.176 to 1.76 GPM (0.6662 to 6.662 LPM)
|
±0.5%
|
Amplified Square Wave
|
913.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
1/2″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
|
FTB-906-P $1,092.14
|
Meter
|
Liquid
|
0.264 to 2.64 GPM (1 to 10 LPM)
|
±0.5%
|
Amplified Square Wave
|
913.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
1/2″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
|
FTB-910-P $1,092.14
|
Meter
|
Liquid
|
0.66 to 6.6 GPM (2.498 to 24.98 LPM)
|
±0.5%
|
Amplified Square Wave
|
913.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
1/2″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
|
FTB-915-P $1,187.40
|
Meter
|
Liquid
|
1.76 to 35 GPM (6.66 to 132.49 LPM)
|
±0.5%
|
Amplified Square Wave
|
913.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
1″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
|
FTB-930-P $1,196.56
|
Meter
|
Liquid
|
3.52 to 66 GPM (13.32 to 249.83 LPM)
|
±0.5%
|
Amplified Square Wave
|
913.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
1 1/2″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
|
FTB-940-P $1,464.24
|
Meter
|
Liquid
|
4.4 to 88 GPM (16.65 to 333.12 LPM)
|
±0.5%
|
Amplified Square Wave
|
913.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
2″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
|
FTB-960-P $2,104.64
|
Meter
|
Liquid
|
17.6 to 308 GPM (66.62 to 1165.9 LPM)
|
±0.5%
|
Amplified Square Wave
|
362.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
3″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
|
FTB-970-P $2,104.64
|
Meter
|
Liquid
|
22 to 440 GPM (83.28 to 1665.58 LPM)
|
±0.5%
|
Amplified Square Wave
|
362.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
3-1/2″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
|
FTB-980-P $2,705.01
|
Meter
|
Liquid
|
44 to 880 GPM (166.55 to 3331.16 LPM)
|
±0.5%
|
Amplified Square Wave
|
362.5 psi
|
120 C (248 F)
|
304, 316,CD4MCU SS, Tungsten Carbide
|
NPT male
|
4-1/2″
|
No Display
|
2M Cable, 8 Blade CD4MCU Stainless Steel Rotor
|
You can request the necessary certificates, documentation, instructions and user guide for OMEGA FTB900 using the special form.
You can buy OMEGA FTB900 in UAE at a price starting from 1,033.77 $ in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. OMEGA FTB900 price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
See also: Flow meters
