The FTB-100 Series of turbine meters have a sealed ball bearing design for high accuracy performance (±½% of reading full scale) at an economical cost.
Made in USA. brand OMEGA, model FTB100
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
Retail price from $1,801.12
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
Turbine Flowmeters with Economical Ball Bearing Design
The FTB-100 Series of turbine meters have a sealed ball bearing design for high accuracy performance (±½% of reading, not full scale) at an economical cost. The non-metallic bearing retainers minimize friction, thereby allowing these meters to be used with clean fluids that have poor lubricating properties ( i.e.water). Ball bearings also give the widest linear flow range, particularly in larger turbines. Bearing replacement and clean-up are fast and easy, since all internal parts are easily accessible by removing a single nut.
These turbine flowmeters have a low mass rotor design which allows rapid dynamic response, so they can be used in pulsating flow applications. Deflector cones eliminate downstream thrust on the rotor and allow hydrodynamic positioning of the rotor between the cones. This provides wider rangeability and longer bearing life than conventional turbine flowmeters. Integral flow-straightening tubes minimize the effects of upstream turbulence.
FTB-100 Turbine Meters are available with integral signal conditioners (as shown in photo) which provide scaled and unscaled frequencies, 4-20 mA, or 0-5 Volt outputs. Units without integral signal conditioners are supplied with mating connector for two-wire hook-up.
| Model No. | Fittings | Linear Flow Range Water |
Max Operating Pressure | Max Pressure Drop | Length mm (in) |
Nominal K-Factor Pulses/Gal |
Weight kg (lb) |
|
|---|---|---|---|---|---|---|---|---|
| LPM | GPM | |||||||
| FTB-101 | ½ MNPT | 1.32 to 13.2 | 0.35 to 3.5 | 5000 psig | 3.0 psid | 62 (2.45) | 13,000 | 0.4 (1) |
| FTB-102 | ½ MNPT | 2.84 to 28.4 | 0.75 to 7.5 | 5000 psig | 5.0 psid | 62 (2.45) | 10,000 | 0.4 (1) |
| FTB-103 | ½ MNPT | 4.73 to 36 | 1.25 to 9.5 | 5000 psig | 5.2 psid | 62 (2.45) | 6,000 | 0.4 (1) |
| FTB-104 | ¾ MNPT | 6.62 to 61 | 1.75 to 16 | 5000 psig | 3.0 psid | 70 (2.75) | 4,100 | 0.4 (1) |
| FTB-105 | ¾ MNPT | 9.5 to 110 | 2.5 to 29 | 4250 psig | 5.0 psid | 83 (3.25) | 2,200 | 0.4 (1) |
| FTB-106 | 1 MNPT | 15 to 227 | 4 to 60 | 3850 psig | 5.1 psid | 89 (3.5) | 640 | 0.9 (2) |
| FTB-107 | 1¼ MNPT | 23 to 352 | 6 to 93 | 3850 psig | 4.3 psid | 99 (3.88) | 410 | 0.9 (2) |
| FTB-108 | 1½ MNPT | 30 to 492 | 8 to 130 | 3000 psig | 3.0 psid | 111 (4.38) | 230 | 1.4 (3) |
| FTB-109 | 2 MNPT | 57 to 852 | 15 to 225 | 2500 psig | 3.3 psid | 121 (4.75) | 120 | 1.8 (4) |
| FTB-110 | 2½ MNPT | 95 to 1514 | 25 to 400 | 2250 psig | 4.0 psid | 154 (6.06) | 62 | 2.3 (5) |
| FTB-111 | 3 MNPT | 151 to 2460 | 40 to 650 | 2000 psig | 4.0 psid | 191 (7.50) | 55 | 3.2 (7) |
| Product Number | Category | Media Type | Flow Range | Accuracy | Output Signal | Max Operating Pressure | Max Process Temperature | Wetted Materials | Process Connection Type | Process Connection Size | Display |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
FTB-101 $1,801.12
|
Meter
|
Liquid
|
0.35 to 3.5 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
1/2″
|
No Display
|
|
FTB-102 $1,801.12
|
Meter
|
Liquid
|
0.75 to 7.5 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
1/2″
|
No Display
|
|
FTB-103 $1,801.12
|
Meter
|
Liquid
|
1.25 to 9.5 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
1/2″
|
No Display
|
|
FTB-104 $1,801.12
|
Meter
|
Liquid
|
1.75 to 16 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
3/4″
|
No Display
|
|
FTB-105 $1,801.12
|
Meter
|
Liquid
|
2.5 to 29 GPM
|
±0.5%
|
Sinusoidal Wave
|
4,250 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
3/4″
|
No Display
|
|
FTB-106 $1,992.90
|
Meter
|
Liquid
|
4 to 60 GPM
|
±0.5%
|
Sinusoidal Wave
|
3,850 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
1″
|
No Display
|
|
FTB-107 $2,163.89
|
Meter
|
Liquid
|
6 to 93 GPM
|
±0.5%
|
Sinusoidal Wave
|
3,850 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
1-1/4″
|
No Display
|
|
FTB-109 $2,566.87
|
Meter
|
Liquid
|
15 to 225 GPM
|
±0.5%
|
Sinusoidal Wave
|
2,500 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
2″
|
No Display
|
|
FTB-110 $3,315.26
|
Meter
|
Liquid
|
25 to 400 GPM
|
±0.5%
|
Sinusoidal Wave
|
2,250 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
2 1/2″
|
No Display
|
|
FTB-111 $3,315.26
|
Meter
|
Liquid
|
40 to 650 GPM
|
±0.5%
|
Sinusoidal Wave
|
2,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, Ceramic
|
NPT male
|
3″
|
No Display
|
You can request the necessary certificates, documentation, instructions and user guide for OMEGA FTB100 using the special form.
You can buy OMEGA FTB100 in UAE at a price starting from 1,801.12 $ in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. OMEGA FTB100 price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
See also: Flow meters
