Atomizer Aerosol Generator ATM 228 for aerosol generation from liquids for mobile use, integrated compressor, pneumitic-controlled, remote controllable
Made in Germany. brand TOPAS, model ATM 228
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
price by request
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
The aerosol generator ATM 228 is a further development of the ATM 226 aerosol generator and serves for the mobile generation of test and calibration aerosols from pure liquids, solutions and suspensions. The generator complies to all requirements of VDI 3491-2.
Aerosol generation is realised by a brushless compressor. Accordingly, no external compressed air supply is required. For the purpose of reproducible and long-term stable aerosol generation, the air flow rate is controlled via the pressure drop over the nozzle. This allows also a reproducible and stable generator operation even at very low air flow rates and thus also at lowest particle production rates.
For the dispersion of the substance to be aerosolised (aerosol substance), the ATM 228 is equipped with a two-substance nozzle designed by the Topas GmbH. The nozzle is operated within or above the aerosol substance (submerged or non-submerged operation mode) and consists of two inlet ports for the supply of air as well as aerosol substance and one outlet port for the generated primary aerosol.
The supply of a defined air flow rate causes a negative pressure at the nozzle inlet port for the aerosol substance. The aerosol substance flows thus into the dispersion zone of the nozzle, where aerosol substance and gas flow converge and form a droplet aerosol.
BENEFITS
APPLICATIONS
Parameter title | Unit | Value |
---|---|---|
setting parameter | hPa | differential nozzle pressure |
setting range | hPa | 0 … 1400 |
setting resolution | hPa | 1 (≤ 50), 5 (> 50) |
setting method | – | manual, controlled |
aerosol, volumetric flow rate | L/h | 20 … 250 |
aerosol, mass flow rate (aerosol substance) | g/h | 0 … 1,4 |
operation medium, gas/air | – | ambient air (filtered internally) |
operation medium, aerosol substance | – | liquids (DEHS, PAO,…), solutions (NaCl, KCl,…), suspensions (PSL,…) |
operating medium, aerosol substance – filling volume | mL | max. 80 |
power supply | – | 100 … 240 V AC, 12 V DC (optional battery operation) |
hose connector, outlet | mm | Ø 8 |
power consumption | W | max. 36 |
environmental condition, max. counterpressure | kPa | 20 |
dimensions (w × h × d) | mm | 120 × 195 × 300 |
weight | kg | 3,9 |
You can request the necessary certificates, documentation, instructions and user guide for TOPAS ATM 228 using the special form.
You can buy TOPAS ATM 228 in UAE at a favourable price in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. TOPAS ATM 228 price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
See also: Aerosol generators for clean room