FTB-201 turbine meters have male flared-end fittings for easy connections and features a mating 2-wire connector with optional integrally mounted signal conditioners
Made in USA. brand OMEGA, model FTB200
International delivery to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain, Oman and other Middle Eastern countries.
Our warehouses are located in UAE.
Retail price from $1,801.12
Available
Only the best I&C brands
Our company is a UAE supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at best prices. We provide really advantageous conditions for partners
Fast delivery across the Middle East
Supply to United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Bahrain, Oman and other countries
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
Economical Ball Bearing Turbine Flowmeters With 37° Flare Fittings
OMEGA™ FTB-201 Series turbine meters have male flared-end fittings for easy connections. They are built to meet the performance requirements of MS 33656, though they do not carry a military specification. These units come with a mating 2-wire connector and can be supplied with the integrally mounted signal conditioners to provide 4 to 20 mA, 0 to 5V, and factored pulse outputs.
Flow Straightening
Proper application of a turbine flowmeter requires that there be a suitable piping section both downstream and upstream of the meter if it is to achieve optimum accuracy. Whereas an inlet straight pipe run of 10 pipe diameters and an outlet straight pipe run of 5 pipe diameters provide the necessary flow conditioning in general, some applications require an upstream flow straightener. Such applications include custody transfer. A flow straightener consists of a section of piping which contains a suitably dimensioned and positioned thin walled tube cluster to eliminate fluid swirl. (see full specifications for “Typical Turbine Meter Installation Drawing”.
37° Flare Installation Kits
Installation kits with the required up and downstream straight pipe lengths for proper turbine operation are available. Installation kits for turbine meters with 37° flare end fittings consist of two lengths of stainless steel tubing cut to a length appropriate for the upstream and downstream straight pipe runs and flared at one end. Mating sleeves and nuts are included. The kits can be conveniently butt-welded into the piping system. Flow straightening sections may be provided with the installation kit. Kits are available in tubing sizes from ½ to 2 ½”.
Strainers and Filters
Turbine meters are intended for clean fluid service only; where there is any doubt concerning possible particulate impurities in the process fluid, strainers are recommended. A strainer/filter may be required to reduce the potential hazard of fourling or damage that can be caused by foreign matter. Pipe rouge, the extremely fine rust which develops on the inside of some piping, is a serious problem for turbine meters, due to the difficulty in filter out these particles. Consult Omega Flow Engineering Department for applications that may entail pipe rouge.
When using FTB-200 Series units for fluids with viscosities other than 1 centistoke, special calibrations and universal viscosity curves are available, consult OMEGA’s Flow Engineering Department for quote.
Accuracy: ±0.5% of reading
Repeatability: ±0.1% of reading
Temperature Range: -268 to 232°C (-450 to 450°F)
Maximum Intermittent Overrange: 150% of maximum range
Materials of Construction:
Body: 304 SS;
Rotor: 17-4 PH SS
Bearings: 440C SS
Installation Kits: 340 SS, 1.7 mm (0.065″) thick
Electrical: Two-wire connector, included
Max Pressure Drop: 0.34 bar (5 psi)
| Meter Size | Mesh Size | Maximum Partical Size (in) |
|---|---|---|
| 1/4 to 1/2″ | 100 | 0.0055 |
| 5/8 to 1 1/4″ | 70 | 0.008 |
| 1 1/2 to 2 1/2″ | 40 | 0.015 |
| Model No. | 37° Flare Fitting Size |
Linear Range Water |
Max Operating Pressure |
Length | Nominal K-Factor pulses/gal |
Weight kg (lb) |
|---|---|---|---|---|---|---|
| FTB-201 | 3/4-16 UNF-3A | 0.35 to 3.5 GPM | 5000 psi | 62 mm (2.45″) | 13,000 | 0.4 kg (1 lb) |
| FTB-202 | 3/4-16 UNF-3A | 0.75 to 7.5 GPM | 5000 psi | 62 mm (2.45″) | 10,000 | 0.4 kg (1 lb) |
| FTB-203 | 3/4-16 UNF-3A | 1.25 to 9.5 GPM | 5000 psi | 62 mm (2.45″) | 6,000 | 0.4 kg (1 lb) |
| FTB-204 | 7/8-14 UNF-3A | 1.75 to 16 GPM | 5000 psi | 70 mm (2.75″) | 4,100 | 0.4 kg (1 lb) |
| FTB-205 | 1-1/16-12 UNF-3A | 2.5 to 29 GPM | 5000 psi | 83 mm (3.25″) | 2,200 | 0.4 kg (1 lb) |
| FTB-206 | 1-15/16-12 UNF-3A | 4 to 60 GPM | 3500 psi | 89 mm (3.50″) | 640 | 0.9 kg (2 lb) |
| FTB-207 | 1-5/8-12 UNF-3A | 6 to 93 GPM | 3000 psi | 99 mm (3.88″) | 410 | 0.9 kg (2 lb) |
| FTB-208 | 1-7/8-12 UNF-3A | 8 to 130 GPM | 2250 psi | 111 mm (4.38″) | 230 | 1.4 kg (3 lb) |
| FTB-209 | 2-1/2-12 UNF-3A | 15 to 225 GPM | 1750 psi | 121 mm (4.75″) | 120 | 1.8 kg (4 lb) |
| Product Number | Category | Media Type | Flow Range | Accuracy | Output Signal | Max Operating Pressure | Max Process Temperature | Wetted Materials | Process Connection Type | Process Connection Size | Display |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
FTB-201 $1,801.12
|
Meter
|
Liquid
|
0.35 to 3.5 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
1/2″
|
No Display
|
|
FTB-202 $1,801.12
|
Meter
|
Liquid
|
0.75 to 7.5 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
1/2″
|
No Display
|
|
FTB-203 $1,801.12
|
Meter
|
Liquid
|
1.25 to 9.5 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
1/2″
|
No Display
|
|
FTB-204 $1,801.12
|
Meter
|
Liquid
|
1.75 to 16 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
5/8″
|
No Display
|
|
FTB-205 $1,801.12
|
Meter
|
Liquid
|
2.5 to 29 GPM
|
±0.5%
|
Sinusoidal Wave
|
5,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
3/4″
|
No Display
|
|
FTB-206 $1,992.90
|
Meter
|
Liquid
|
4 to 60 GPM
|
±0.5%
|
Sinusoidal Wave
|
3,500 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
1″
|
No Display
|
|
FTB-207 $2,120.76
|
Meter
|
Liquid
|
6 to 93 GPM
|
±0.5%
|
Sinusoidal Wave
|
3,000 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
1-1/4″
|
No Display
|
|
FTB-208 $2,177.74
|
Meter
|
Liquid
|
8 to 130 GPM
|
±0.5%
|
Sinusoidal Wave
|
2,250 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
1 1/2″
|
No Display
|
|
FTB-209 $2,566.87
|
Meter
|
Liquid
|
15 to 225 GPM
|
±0.5%
|
Sinusoidal Wave
|
1,750 psi
|
232 °C (450 °F)
|
304 SS, 17-4 SS, 440C SS
|
AN 37° Flare Male
|
2″
|
No Display
|
You can request the necessary certificates, documentation, instructions and user guide for OMEGA FTB200 using the special form.
You can buy OMEGA FTB200 in UAE at a price starting from 1,801.12 $ in «Texair FZCO» by leaving a request on the website, by phone +441225535040 or by email ceo@texair.eu. OMEGA FTB200 price are subject to change depending on exchange rates. We deliver instruments by transport companies in United Arab Emirates, Kuwait, Qatar, Saudi Arabia, Saudi Arabia, Bahrain and other Middle Eastern countries.
See also: Flow meters
