Products not found
The FTB-630 Series turbine meters are dry-register mechanical totalizers that offer accurate, economical reading of high flows with low pressure loss.
- Non-Resettable Mechanical Totalizer
- 2, 3, 4, 6, and 8′ Pipe Sizes
- Pulse Output Available
- Rugged Construction
Retail price from $1 270
Available
The FP-2540-Series offer the added strength and corrosion resistance of stainless steel for applications requiring low velocity measurement.
- Rugged 316 Stainless Steel Construction
- Flow Rates as Low as 0.3 fps
- Installs in a Variety of Pipe Sizes
- No Magnets in Process Fluid
Retail price from $900
Available
The FMG490 Series has a remote display that can be mounted up to 200 FT from the flow meter. With electrodes designed to discourage fouling, it is available in 3″ to 12″ sizes.
- Easy setup
- Minimal straight pipe
- Mounted or remote rate & total
- Tamper-evident seal
Retail price from $4 022
Available
The OMEGA’s precision variable-area flow meters for air, water, and gases feature an easy-to-read millimeter scale and are supplied with correlation charts for air and water
- ±2% Full Scale Accuracy
- Non-Rotating Seal Spindle
- Easy-to-Read Scale Design
- Special Lock Nut Design for Easy Tube Replacement
Retail price from $237
Available
The SUTO S461 Ultrasonic Clamp-On Flow Meter for Water and Other Liquids is an all-in-one solution to provide reliable, cost-efficient and accurate flow and consumption measurements of water and other liquids. Based on the transit time technology, S461 flow meter comes with unique features and outstanding performance.
Retail price from $2 452
Available
The Series MAFS Metal Averaging Flow Sensor is ideal for use with Dwyer® precision air velocity gages, transmitters and switches. The Series MAFS uses evenly distributed total and static pressure measuring points to deliver an accurate measurement of velocity pressure in a duct.
Retail price from $58
Available
The Series CAM Compressed Air Meter operates by the calorimetric measuring principle to detect the standard volume flow of operating compressed air. It is designed specifically to evaluate the current flow rate and the current consumed quantity in compressed air systems. With an easily programmable digital display, this unit offers a quick, accurate readout. The Series CAM is constructed of high-grade materials and is virtually maintenance free.
Retail price from $1 709
Available
The Series CP/CN/CT/CX Coolpoint® Vortex Shedding Flowmeter is made for water, water/glycol mixtures, or low viscosity fluids. These units contain no moving parts to clog or wear, allowing for minimal maintenance in the field. This series has two versions: a 3-wire version, where power is supplied separate from the 4-20 mA output, and a 2-wire loop-powered version. The 3-wire version is equipped with a solid state relay that can be configured in the field to be either an alarm or a pulse output, an LED display which allows the user to choose between selectable engineering units (GPM or LPM), and a high temperature option.
Retail price from $65
Available
The Series VF Visi-Float® Flowmeters are a line of direct reading, precision machined, clear acrylic body flowmeters suitable for both gas and liquid applications. The fabrication of the Visi-Float® flowmeters is backed by over 60 years of experience in acrylic instrument machining. This Series consists of 2″ (51 mm) and 4″ (102 mm) scales with optional precision metering valves.
Retail price from $40
Available
The Series VFLO Venturi Flowmeter with Magnehelic® Gage is fabricated from aluminum and has a gradual Venturi profile to reduce pressure losses through the meter. Flowmeter can be used in a vertical or horizontal position just by rotating the Magnehelic® gage. The Magnehelic® gage provides a large, clear and accurate display of your differential pressure reading. Each meter is calibrated at standard atmospheric conditions. The dual scale reads in SCFM and in w.c. The meter is supplied with easy to read reference charts for various flow conditions. It is available in line sizes from 1″ to 4″ and can handle vacuum and pressure applications.
To place an order for the Venturi Flowmeter with a Magnehelic® Gage, see the
Retail price from $7
Available
Batching flow processor with output controls, flow rate, large digits, analog 4-20 mA active and passive loop configuration. Two programmable pulse scaled outputs, 220VAC.
- Batch Control
- Regeneration Control
- High/Low Flow Rate Monitoring
- Water Usage Monitoring
Retail price from $1 470
Available
OMEGA’s in-line flowmeters offer high accuracy flow rate indication for oil, water or air and the ability to either control the flowrate or alarm on high or low flowrates.
- ±2% Full Scale Accuracy
- ±1% Repeatability
- Direct Readings for Oil, Water or Air
- Built-in Limit Switch for Alarm and Control
Retail price from $640
Available
Using the basic FMA3100 thermal mass flow sensor, the FMA3200 mass flow controllers offer accurate control of gas flows in a compact package ideal for many OEM applications.
- For Flowrates Up To 10,000 mL/Min
- 0-5 Vdc Linear Output
- Cost Effective
Retail price from $469
Available
FTB690 Series turbine meters with microprocessor-based electronics offers a durable, compact, high-precision fluid measurement device, with total and rate indication.
- Both Rate and Total Indication
- 3% Reading Accuracy
- 6-Digit LCD Display
- Reads GPM or LPM
Retail price from $531
Available
The FP-5200 also features OMEGA’s patented “open-cell” rotor, for increased linearity at 1% over the full dynamic range of 1.6 to 20 fps, with negligible head loss.
- Stainless Steel Paddle Wheel Sensors
- Boiler Water Feed Lines
- Turbine Steam Condensate
- Energy Management Systems, HVAC
Retail price from $737
Available
The FMG480 Series is used in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications.
- Easy setup
- Minimal straight pipe
- Mounted or remote rate & total
- Tamper-evident seal
Retail price from $4 022
Available
The OMEGA’s precision variable-area flow meters for air, water, and gases have up to ±2% of full scale accuracy. (Models ending in “07” or “45” have ±5% FS accuracy).
Retail price from $255
Available
The SUTO S462 Clamp-On Ultrasonic Flow Sensor for Water and Other Liquids offers our users a highly economical and easy to install liquid measurement solution. The Flow Sensor is available for pipe sizes from DN10 to DN40. The S462 provides accurate liquid flow and consumption measurement without causing process downtime, pressure loss or contamination of the medium to be measured.
Retail price from $1 658
Available
Aimag A electromagnetic flow meters is a products that developed for sewage, water, wastewater flow measurement. Widely used in metering and custody transfer. And can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions. The diameter of the electromagnetic flowmeter ranges from DN6 to DN3000.
Artang’s Exclusive Offer: 2-YEAR WARRANTY. That’s twice the industry standard for electromagnetic flowmeters!
price По запросу
Available
Flanged sensor has a rugged and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube in stainless steel 304 and the outer tube in carbon steel are welded to provide a hermetic seal. Therefore it’s free from long-term maintenance.
Easy and fast to install and start up.
price По запросу
Available
Asameters® model V6, proprietary, are flap type flow meters with flow rate reading by pointer, output signal 4-20 mA and HART-Protocol (power supply: 24Vdc ± 10%).
price По запросу
Available
Orifice plate Asameters, model O, are calibrated measuring devices suitable for liquid, gas and steam even in extreme operating conditions (high temperature, high pressure and corrosive liquids).
price По запросу
Available
LGY compact orifice plate flow meter is composed of flow element, differential pressure transmitter, three-way manifold, temperature sensor and pressure sensor, which can measure liquid, gas, vapor and other medium.
price По запросу
Available
QTLD magnetic flow meter, also known as electromagnetic flow meter or mag meter, is widely used because less obstruction, cost-effective and accurate measurement. Electromagnetic flow meter don’t have any moving parts to wear down, reducing the need for maintenance or replacement. Flowmeters are available with a variety of inserts, electrodes and sizes to suit different conductive fluids.
price По запросу
Available