Products not found
LGV V-cone flow meter is the second generation inner cone flow meter. It is a good performance differential pressure flow meter developed by Dandong Top Electronics Instrument (Group) Co., Ltd in cooperation with Tianjin University. The unique support and taper angle design enables it to measure the flow rate of various medium such as gas, liquid and vapor under very short straight pipe section conditions.
price По запросу
Available
Aitex E-type vortex flow meter is a steam vortex flow meter with excellent reliability and performance. ARTang Aitex E vortex flow meter adopts unique signal processing technology, and has better stability, accurate measurement. ARTang provides a wide range of products to meet all customer requirements.
price По запросу
Available
The Series GFM2 Gas Mass Flow Meter is an ideal choice for the measurement of flow rates of a wide variety of gases. Unit can be calibrated for a variety of gases with user selectable 0 to 5 VDC or 4 to 20 mA and two relay outputs and programmable totalizer that indicates total gas quantity.
price По запросу
Available
LGP balanced flow meter is a flow element developed on the basis of standard orifice plate. Its sensor is a porous disk throttling rectifier mounted on the section of the pipe. Size and distribution of each hole are customized based on test data and become function holes. The balanced flow meter sensor can realize the fluid balance measurement skillfully, obviously reduces the eddy current formation, reduces the dead effect and the fluid kinetic energy loss.
price По запросу
Available
Temperature & pressure compensation vortex flowmeter adopts Karman vortex street principle, and the sensor has built-in piezoelectric crystal and integrated temperature and pressure measurement function, which can measure gas temperature and pressure, ensure more accurate volume or mass flow.
price По запросу
Available
Operating principle of LGB Annubar Flow Meter is the same as that of other kinds of differential pressure flow meters, Annubar Flow Meter is superior to other differential pressure flow meters because of its unique structure.
price По запросу
Available
This new model, at high performance solutions, both as hardware and software, can be defined as an HI-TEC line, addressed to very demanding customers from the point of view of performance and precision.
Output signal is both analogical and digital; and qualitatively the instrument is very performing, having accuracy <+-0,5% of reading and repeatability of 0,1% r.v.
price По запросу
Available
QTLD/F partially-filled flowmeter is composed of converter, flow sensor and level sensor. The user only needs to enter the diameter of pipe, the non-full pipe flowmeter will automatically calculate the flow rate, and automatically display the instantaneous flow, total flow, velocity, height, etc. It can measure liquid volume min 10% of full pipe. It is especially suitable for the needs of municipal rainwater, waste water, sewage discharge and irrigation.
price По запросу
Available
Flanged sensor has a rugged and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube in stainless steel 304 and the outer tube in carbon steel are welded to provide a hermetic seal. Therefore it’s free from long-term maintenance.
Easy and fast to install and start up.
price По запросу
Available
Standard flow controller for most laboratory applications.
- Fast response: < 700 ms
- Touch-based flow setpoint input
- Free switching and modification of gas media
- Flexible switching between flowmeter and controller modes
price По запросу
Available
Wafer sensor has a rugged and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube and the outer tube both in stainless steel are welded together to provide a hermetic seal. Therefore it’s maintenance free and provide a long-term reliability. Easy and fast to install and start up.
price По запросу
Available
UFM ultrasonic flow meter is widely used in the long-term on-line measurement of various liquids, suitable for all dense pipes. The sensor of flow meter is divided into external clamp type, plug-in type and pipe section type, in which the external clamp type and plug-in type can be continuously and uninterrupted flow installation. The main engine can be installed in the indoor, instrument cabinet, the sensor is installed on the pipe, the main engine and sensor are connected by custom cable, the flow rate can be measured, and the ration temperature sensor can realize the heat measurement.
price По запросу
Available
High-performance flow controller for auxiliary process control
- High accuracy (traceable): ±0.5% ~ ±1.0%
- Digital signals as standard, analog signals optional
- Wide temperature and pressure ranges
- Fast response: ≤700 ms
price По запросу
Available
Sensor model DIN, Clamp, Gas or SMS has a sturdy and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube and the outer tube both in stainless steel are welded together to provide a hermetic seal. Therefore it’s maintenance free and provide a long-term reliability. It’s available entirely made of stainless steel, also for the housing of the converter.
price По запросу
Available
NBLB target flow meter is a new generation of flow meter developed by our company. It adopts a new force-torque tube-corner conversion mechanism, transfers the angle through the torque tube, then measures the angle through the high precision Hall sensor and outputs the voltage signal corresponding to the flow change and outputs the standard 4 mA~20 mA square (linear) current analog signal. The instrument has the modern popular enclosure design, the shape is beautiful and each working chamber is isolated, uses the non-contact angle measurement technology to avoid the strain sensor force deformation, safe and reliable.
price По запросу
Available
Stable Gas Mass Flow Controller for Integration into Industrial Equipment
- Flow range: 0.5 cm³/min ~ 5000 L/min
- Digital signals as standard, analog signals optional
- High reliability
- Fast response: ≤800 ms
- High accuracy (traceable): ±0.5% ~ ±1.0%
price По запросу
Available
Asameters model C-G…38/39 all made of stainless steel are designed for medium and high flow rates for every kind of gas (mod. C) and liquid (mod. G) also aggressive, at extreme operating and environmental conditions (high pressures and/or low or high temperatures).
price По запросу
Available
MTF variable area flow meter for micro flow can measure tiny liquid or gas, which has the characteristics of stable and reliable measurement and wide application range. The instrument is equipped with a fine-tuning valve to facilitate the user’s setting of a specific flow rate. Instrument is based on the float measurement principle. According to the flow direction of the medium, it can be divided into side in and out, bottom in and out of two types. According to the display mode, it is divided into mechanical pointer type and liquid crystal display with 4-20 mA current output type.
price По запросу
Available
A portable solution for measurements anywhere. The device supports: direct touch switching, free change of gas environment; touch control. The flow meter is highly reliable and resistant to overloads and electromagnetic interference.
Flow measurement range: 0.5 cm³/min ~ 5000 l/min; Fast response: 100 ms
price По запросу
Available
Asameters model C/G …47 _ 50 all made of stainless steel are designed for applications in potentially explosive areas thanks to their flameproof design, certified ATEX Ex ia IIC T4, T6… Zone 0 and Zone 1 (on request).
price По запросу
Available
MTFC series purge device use micro metal pipe float flow meter and constant current valve to form a purge device, which realizes the steady output of flow measurement and pressure fluctuation.
price По запросу
Available
Mass flow meter that meets the requirements of scientific research. It is possible to switch between different gases using a sensor without having to enter conversion factors.
Flow measurement range: 0.5 ~ 2000 cm³/min (SCCM); 5 ~ 5000 l/min (standard); digital interface available: RS485 and analog: 0~5 V / 4～20 mA.
price По запросу
Available
Asameters model L…38 _ 39 all made of stainless steel are designed for low flow rates with any type of gas or liquid also aggressive, at extreme process and environmental conditions (high pressures and/or low or high temperatures).
price По запросу
Available
LWQ gas turbine flow meter integrates gas turbine flow sensor and flow converter, its main performance index reaches the international advanced level. It is an ideal instrument for gas metering such as petroleum, chemical industry, electric power, metallurgical industry and civil boiler, as well as for urban gas and gas pressure regulating station metering and gas trade metering.
price По запросу
Available