Products not found
PBLT2 and PBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.
Retail price from $785,6
Available
The MBLT Miniature Submersible Level Transmitter is only 0.63″ in diameter making it ideal for level monitoring in well and borehole applications. Constructed for years of trouble free service, the MBLT has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Featured in the MBLT is a precision ±0.10% or ±0.25% of full scale accuracy output, better than BFSL or BSL rated outputs used by most competitors. Lightning and surge protection (not guaranteed or covered by standard warranty) is included standard to stand up in harsh applications. MBLT comes with a choice of polyether polyurethane or ETFE cable materials and all are vented for barometric pressure compensation. Vent is covered with a maintenance-free filter preventing particulate or water droplets from entering the transmitter.
Retail price from $742,05
Available
The Series FBLT Flush Tip Submersible Level Transmitters measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a narrow 316 SS housing with PTFE coated flush diaphragm tip.
Retail price from $990,8
Available
The Series ULT Ultrasonic Level Transmitter provides non-contact measurement of liquid levels in an explosion-proof body. It is capable of measuring up to 32.8′ (10 m) with a PVDF sensor and 4-20 mA output.
Retail price from $1878,25
Available
The Model ULSM Ultrasonic Level Sensor provides non-contact, continuous ultrasonic level measurement of fluids for medium range applications. Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions. The Model ULSM has failsafe logic that is easily configured to custom applications via free software removing the need for target calibration. Using the free software, the Model ULSM can be programmed to transmit an output signal as well as set the four relays for control applications. This rugged design comes with a NEMA 6P submersible enclosure rating to ensure a long lasting unit.
Retail price from $953.55
Available
The Model ULSS Ultrasonic Level Sensor provides non-contact, continuous ultrasonic level measurement of fluids for short range applications. Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions. The Model ULSS has failsafe logic that is easily configured to custom applications via free software removing the need for target calibration. Using the free software, the Model ULSS can be programmed to transmit an output signal as well as set the four relays for control applications. This rugged design comes with a NEMA 6P submersible enclosure rating to ensure a long lasting unit.
Retail price from $781.2
Available
The Series CRF2 is a level transmitter providing a two-wire 4 to 20 mA output to indicate level of liquids, powders and bulk materials. State of the art sensing technology in the CRF2, using impulse RF admittance measurement provides excellent accuracy and stability. The CRF2 senses capacitance changes resulting from the height of the material in the tank between the probe and the tank wall. In non-metallic tanks or tanks that do not have the wall parallel to the probe a ground reference must be used.
Retail price from $1043,25
Available
ZTD displacer level (interface) transmitter is an intelligent level measuring instrument with international leading level independently developed by DDTOP after many years of technical research. The simple buoyancy principle is used to detect the change of level, and then the magnetic signal is converted into a stable 4-20mA current signal and output through the torque tube assembly and the hall sensor. The instrument has a variety of configurations and pressure levels, which are suitable for various applications.
price by request
Available
TRG804X non-contact type radar level transmitter has a wider measurement range, and better diagnostic function. The use of advanced signal processing technology can filter out false targets or other noise signals. Pulse string radar level transmitter transmits short pulse string to the liquid surface. Through antenna, it can transmit extremely short pulses with very low energy. By using ultra-high speed timing circuit to measure the time required for the pulse signal to meet liquid surface and reflect echo.
price by request
Available
The high-pressure level switch is a displacer drive unit, which uses a single switch assembly for level alarm or control. These devices are designed for liquids with working pressures up to 250 bar and specific gravities of 0.40 and above. A permanent magnetic sensor is attached to the rotary switch drive. When the float/displacer rises correspondingly with the rise of the liquid, the corresponding sleeve will move into the range of the magnetic sensor and cause the switch to act accordingly
price by request
Available
UQK400 float level controller is composed of float, connecting rod, magnetic sensor and magnetic switch and signal conversion mechanism. The change of the medium level in the container causes the relative displacement of the float, which drives the connecting rod and the iron core to move up and down to change the relative position of the magnetic sensor. Through the magnetic coupling, the micro switch or the reed switch is operated to achieve l
price by request
Available