Products not found
FLR1000 Series flow sensors can measure low flow rates from 20 mL/min to 500 L/min. These sensors are suitable for industrial, commercial, and laboratory flow applications.
- 0 to 5 Vdc Linear Output Signal
- Power Input 12 Vdc or 24 Vdc (depending on the model)
- Ranges from 20 to 100 ml/min, 100 to 500 L/min
- 1% Accuracy for Liquids/3% Accuracy for Gasses
Retail price from $383
Available
The Series AFG Flow Grid is an outstanding simple yet accurate cost effective alternative to other duct mounted pressure sensors. Once installed and connected to a suitable measuring instrument, the device will provide years of trouble free monitoring of both air and gas flow. Installing the AFG Flow Grid is quick and easy, the AFG is supplied in kit form to allow both workshop and on-site installation into a wide range of square and circular ducts up to approximately 60″. The AFG Flow Grid is a fundamental pressure sensing device designed to transmit a continuous differential pressure signal. When this output is connected to a suitable measuring instrument (i.e., manometer, pressure transducer, etc.), it may be used to determine air velocity and volume flow rate.
Retail price from $548
Available
The Series DFMT Digital Paddlewheel Flow Transmitter provides instantaneous, as well as totalizing flow monitoring. The unit offers a user selectable 4 to 20 mA or pulse output with compact display.
Retail price from $1 095
Available
The Series GFT2 Flow Totalizer is a microcontroller driven device designed to linearize the flow meter and controller flow curve plus display the instantaneous flow rate, total, and accumulated total. The totalizer is intended to be used with analog flow meters and controllers with analog 0 to 5 VDC, 0 to 10 VDC, or 4 to 20 mA interface. RS-232 or RS- 485 digital interface is available.
Retail price from $661
Available
The Series LFM Polycarbonate Flowmeters are made of precision, injection molded polycarbonate bodies and fittings. This series consists of LFMA, LFMB, LFMC, LFMD, LFME and LFMF flowmeters with 3″ (76 mm), 6″ (152 mm), 5″ (127 mm), 6″ (152 mm), 8″ (203 mm) and 11″ (279 mm) respective scales. They feature dual, direct reading scales measuring in both GPM and LPM.
Retail price from $65
Available
The new Model FC-21 multifunction batcher and the Model FC-22 flow computer satisfy instrument requirements for a variety of flow meter applications.
- Custody Transfer with Audit Trail
- Liquid, Gas, Steam, and Heat Flow Equations
- Menu Selectable Hardware Inputs/Outputs
- Isolated Pulse and Analog Outputs Standard
Retail price from $1 155
Available
The FL-6000A Series of general purpose flowmeters is designed to provide economical, accurate flow rate indication for oil and water and can be mounted in any position.
- ±2% Full Scale Accuracy
- 1% Repeatability
- Direct Readings for Oil or Water
- Good Viscosity Stability
Retail price from $307
Available
The FMA-LP2600A controller uses a proportional valve coupled to the flow body to control flow using the integral PID loop controller. 0 to 5V output (4 to 20 mA optional)
- 130+ Gas Calibrations Including Pure and Mixed Gases
- Pressure, Temperature, and Mass Flow Simultaneously Displayed
- Easy-to-Use Pushbutton Interface
- NIST Traceability Standard
Retail price from $2 325
Available
The FTB370 Series flow turbines are designed for flow rate measurement of water and many water based liquids. They are compact in design and have a wide measuring range.
- Compact Design
- Wide Turn Down Ratio
- High Quality Sapphire Bearing
- Fixed Pulse Rate
Retail price from $631
Available
The FP6500-Series features Ruby bearings and a non-drag pick-off that give these adjustable insertion flow sensors the widest flow range of any of the paddlewheel types.
- Available in 316 Stainless Steel or Brass
- Installs in a Wide Range of Pipe Sizes From 3′ to 40′
- Excellent Low-Flow Performance
- Special Fittings Not Required
Retail price from $867
Available
The complete lack of moving parts of this insertion flow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of conditions.
- Durable
- Adjustable Depth
- Hot-Tap Available
- Brass or Stainless Steel
Retail price from $2 506
Available
FTB Series totalizers are used in applications where accurate measurement of (#2, 4 or 6) heating oil flow is required. The FTB-32 features a fully rotatable, easy-to-read face.
- For Flows Down to 0.26 GPH
- For #2, 4 or 6 Oil
- Direct Totalization in Engineering Units
- Scaled Pulse Output Available
Retail price from $680
Available
The S435 vortex flowmeter is the ideal choice for measuring steam due to its rugged construction, absence of moving parts and high temperature/pressure resistance.
Retail price from $3 728
Available
The Series HFT In-Line Transmitters provide continuous monitoring of flow rate levels via a direct reading in-line flowmeter with electronics to provide proportional 4 to 20 mA, 0 to 5 and 1 to 5 VDC analog outputs. Calibration Option available under Accessories.
Retail price from $1 378
Available
The Series DFMT2 Remote Digital Paddlewheel Flow Transmitter is a two piece digital flow transmitter that provides instantaneous, as well as totalizing flow monitoring. The two piece design allows the user to separate the control panel from the application, making it ideal for industrial use in reverse osmosis water purifying systems and any other applications where space is limited. The large backlit display makes navigating through the menu structure simple. The Series DFMT2 uses high accuracy, industry proven paddlewheel technology, offers a user selectable 4 to 20 mA or pulse output, and has a corrosion resistant PVDF sensor giving it a long operation life. Users can reset the totalizer at any time and set a security password protecting the system settings from unauthorized changes.
Retail price from $1 196
Available
The Series RM Rate-Master® Flowmeters are a line of general use, direct reading precision flowmeters suitable for both gas and liquid applications. This Series consists of 2″ (51 mm), 5″ (127 mm) and 10″ (254 mm) scales that can be panel or surface mounted with optional precision metering valves. Within a given Series, the Rate-Master® flowmeter bodies can be instantly interchanged, allowing the piping to remain undisturbed, interchangeability of the ranges, and easy cleaning. *The Rate-Master® flowmeter bodies can be instantly interchanged within the same series scale size, allowing the piping to remain undisturbed, interchangeability of the ranges, and easy cleaning.
Retail price from $47
Available
The Series HFO In-Line Flow Alarms provide continuous monitoring and control of flow rate levels. The flow alarm can be configured to open or close a contact for an increasing or decreasing set point. Available in 1/4″, 1/2″, 1″ or 1-1/2″ female NPT process connections, in aluminum, brass or 304 SS body.
Retail price from $896
Available
Battery powered flow indicator and totalizer with 3 totalizers, large display, and averaging. It has a user selectable access code, auto-calibration, and no-flow indicator.
- Three Totalizers
- Long-lasting Lithium Batteries (Included)
- Mounting Versatility
- No-Flow Indicator
Retail price from $745
Available
The FL-500UP is a specialized meter for monitoring the flow rate of ultra-pure water to tools, on deionized water returns, and UPW returns.
- Fluid Is Always in Sight
- Direct Reading English and Metric Scale Standard
- Electro-Polished Version of Standard 316 Stainless Steel Shaft and Spring Optionally Available
- PVDF End Fittings
Retail price from $1 114
Available
FMA6500 Series flow controllers allow one to program, record, and analyze flow rates of various gases with a computer via an RS485 interface (optional RS232 is available).
- Digital and Analog Modes Operate Simultaneously
- Programmable Flow Configurations
- RS485 Standard, Multi-Drop Capability of Up to 256 units
- Stores Calibration Data for Up to 10 Gases
Retail price from $2 186
Available
The FTB-630 Series turbine meters are dry-register mechanical totalizers that offer accurate, economical reading of high flows with low pressure loss.
- Non-Resettable Mechanical Totalizer
- 2, 3, 4, 6, and 8′ Pipe Sizes
- Pulse Output Available
- Rugged Construction
Retail price from $1 270
Available
The FP-2540-Series offer the added strength and corrosion resistance of stainless steel for applications requiring low velocity measurement.
- Rugged 316 Stainless Steel Construction
- Flow Rates as Low as 0.3 fps
- Installs in a Variety of Pipe Sizes
- No Magnets in Process Fluid
Retail price from $900
Available
The FMG490 Series has a remote display that can be mounted up to 200 FT from the flow meter. With electrodes designed to discourage fouling, it is available in 3″ to 12″ sizes.
- Easy setup
- Minimal straight pipe
- Mounted or remote rate & total
- Tamper-evident seal
Retail price from $4 022
Available
The OMEGA’s precision variable-area flow meters for air, water, and gases feature an easy-to-read millimeter scale and are supplied with correlation charts for air and water
- ±2% Full Scale Accuracy
- Non-Rotating Seal Spindle
- Easy-to-Read Scale Design
- Special Lock Nut Design for Easy Tube Replacement
Retail price from $237
Available