Products not found
The SUTO S462 Clamp-On Ultrasonic Flow Sensor for Water and Other Liquids offers our users a highly economical and easy to install liquid measurement solution. The Flow Sensor is available for pipe sizes from DN10 to DN40. The S462 provides accurate liquid flow and consumption measurement without causing process downtime, pressure loss or contamination of the medium to be measured.
Retail price from $1 658
Available
The Model SPK Solar Panel makes it possible to use Dwyer flowmeters in remote applications where a reliable source of electricity is not available or practical. The SPK is intended for use with a standard 12V, 22 to 33 amp-hour sealed lead acid battery (not included). It comes standard with a charge controller and corrossion-resistant mounting hardware. The SPK can also be used to provide up to a 40-day back-up power supply for periods of darkness.
Retail price from $1 040
Available
The Series DS In-Line Flow Sensors are two Series of averaging Pitot tubes for compatible gases and liquids that provide accurate and convenient flow rate sensing, for schedule 40 pipe, when purchased with suitable differential pressure gage with appropriate range.
Retail price from $291
Available
The Series VFC Visi-Float® Flowmeter is a direct reading, precision machined, clear acrylic body flowmeter suitable for both gas and liquid applications. This Series consists of two 5″ (127 mm) scale flowmeters, the VFC and VFC II. The VFC features PVC 1″ female NPT connections and the VFC II units are equipped with acetal thermoplastic 1″ male NPT fittings.
Retail price from $137
Available
All plastic Variable Area Flow Meters for water or water like liquid flow measurement applications.
- NIST Calibration Available
- Union Ends to Simplify Installation and Maintenance
- Chemical- and Break-Resistant Metering Tube
- See-Through, Detachable Direct Reading Scale (GPM Water)
Retail price from $524
Available
OMEGA’s FL-6400A in-line flowmeters are designed for use with many caustic or corrosive fluids. These meters feature SS construction and can be mounted in any position.
- ±2% Full Scale Accuracy
- ±1% Repeatability
- Direct Reading Scale for Water
- For Corrosive Fluids
Retail price from $1 085
Available
The FMA-4100/4300 Series flow rate can be displayed in 23 different volumetric flow or mass flow engineering units including a user specific selection with remote programming
- 23 Selectable Engineering Units (Including User Defined)
- Programmable Totalizer
- High and Low Gas Flow Alarms
- Two Sets Programmable SPDT Relays with Latching Feature
Retail price from $1 032
Available
FTB700 Series turbine meters have a unique system of precisely-machined helical rotors and high-quality jewel bearings. The rotor is the only moving part.
- High-Accuracy Machined Turbine Internals Removable with Meter in Line
- Standard Meter Bodies are Flanged
Retail price from $2 325
Available
The FP-5600 and FP8500A-Series low flow sensors are high resolution, low power devices ideal for measuring flow in piping systems with extremely low velocities.
- High Resolution
- Low Power
- Flow Rates As Low As 0.3 fps
- Open Collector Output
Retail price from $387
Available
The FMG600 Series electromagnetic flow meters are designed for measurement of conductive liquids. The FMG600 magmeters have no moving parts and a PTFE lining.
- Virtually No Pressure Loss
- No Moving Parts
- ANSI 150# Flanges or Tri-Clover Sanitary Mount
- RS485 Standard
Retail price from $4 335
Available
The FLK2000 Series has a maximum temperature rating of 140°F (60°C) and a maximum pressure rating of 125 psi and are the ideal choice for medical and laboratory applications.
Retail price from $81
Available
The Model TDFT Thermal Dispersion Flow Transmitter has continuous frequency output. It fits applications with pipe sizes from 1/2″ to 2″ (12.7 to 50 mm) and features 316L stainless steel housing for use in harsh environments.
Retail price from $514
Available
Series DR4 Glass Flowmeters offer a simplified solution to the problem of fluid flow indication at higher capacity levels. Flowmeters have a direct reading scale for air or water and are designed to withstand even the harshest industrial applications. Permanently fused ceramic scale has integral float guides for optimum float performance. Reflective plastic background and 1.5 X magnification lens reduces eye fatigue and allows for more accurate readings. Units include a safety blow-out back panel for additional protection.
Retail price from $1 100
Available
The FLC Series is the economical way to monitor municipal water flows, verify pump outlets and monitor fluid conditions. Piston design allows for installation in any position
- Mounts in Any Direction
- Compact and Rugged
- Allows Visual Fluid Inspection
- Economical Design
Retail price from $155
Available
Rugged In-Line Flow Sensors Available in 1/2″, 3/4″, and 1-1/4″ sizes are protected in a sturdy cast aluminum enclosure, and are easy to install and mount in any position.
- 2% FS Accuracy
- No Straight Pipe Run Required
- Mounts in Any Position
- 4 to 20 mA, 0 to 5 Vdc and 0 to 10 Vdc Outputs Standard
Retail price from $1 080
Available
The FLR-1600A and FLV-4600A series flowmeters and controllers use two of the best studied physical properties of liquids to measure flow: Pressure and Viscosity.
- Response Time of 20 milliseconds Typical (Meter)
- Turndown Ratio of 50:1
- Push Button Tare (with Display)
- Accuracy of ±2% Full Scale
Retail price from $1 988
Available
This high accuracy Gas Turbine system measures the volumetric flow of gas through a pipeline. Gas flowing through the meter turns the turbine rotor.
- Outstanding Accuracy
- Hybrid Ceramic Bearings for Superior Life
- DC or AC (Optional) Power
- Pulse and Analog Output
Retail price from $3 201
Available
The FPB100 sensor is an industry standard and has the added functionality of various output options including flow switch, multi-functional pulse divider or 4 to 20 mA.
- 4 to 20 mA and Programmable Switch/Pulse Divider Output
- Low Flow Capabilities from 0.1m/s (0.3 ft/s)
- Polypropylene or PVDF Material
- Installs into Pipe Sizes DN 15 to DN 200 (0.5 to 8′)
Retail price from $692
Available
The FMG70B Series from OMEGA is a trio of extremely compact, low cost, inductive magnetic flow sensors. The output signal frequency (or current) is proportional to the flow.
- No Moving Parts
- No Flow Obstructions
- Maintenance-Free
- Fast Response Time (< 500 ms)
Retail price from $1 615
Available
The FL-2000 Series offers a wide variety of precision flow meters for use in medical, industrial, chemical, and laboratory applications at an economical price.
- Easy-to-Read English or Metric Scales
- Water Ranges from 4 CCM to 20 GPM, Air Ranges from 40 CCM to 4000 LPM
- Threaded Brass Inserts for Quick Installation
Retail price from $91
Available
The Series DFM Digital Flow Meter is the industry leader in the measurement of mass and volumetric flow rates of process gases. Using the OLED/joystick interface, the flowmeter can measure up to 30 different gases. Simultaneous displays of mass flow, volumetric flow, pressure and temperature parameters promote applications in a variety of industries. NIST traceable certification included.
Retail price from $1 913
Available
The Series PFT Insertion Paddlewheel Flowmeters are used to monitor liquid flow rates in pipes from 1-1/2 to 40″ and is available in brass or 316 SS body. The unit outputs a frequency proportional pulsed or 4 to 20 mA output. The pulse models are a square wave output signal with frequency proportional to the flow velocity and the 4 to 20 mA models have a linear output of the velocity with 4 mA equal to 0 ft/s and 20 mA equal to 25 ft/s.
Retail price from $602
Available
The Series DTFA Variable-Area Flowmeter for Gases measures gas flow rates with ±5% of full-scale accuracy at an affordable price. Rugged aluminum construction ensures great compatibility and the strength to withstand system pressures of up to 3000 psig (200 bar). Available in either 1/4″ or 1/2″ NPT connections. Comes pre-calibrated for horizontal in-line mounting.
Retail price from $434
Available