Products not found
The FL-W7100 Series uses a basic variable-area flowmeter design: a float and tapered tube. As a result, these meters have longer, linear scales and good pointer stability.
Retail price from $1 205
Available
OMEGA’s FL2AA Series multi-tube flow meters are convenient for applications where up to four streams of liquids or gases are to be metered in individual channels.
- Interchangeable 150 mm Flow Tubes
- Variety of Flow Configurations
- ±2% FS Accuracy
- Scales Designed to Minimize Parallax and Eye Fatigue
Retail price from $588
Available
The FD-400 Series ultrasonic doppler flowmeters measure the flow of liquids that contain sound reflectors, suspended solids, or gas bubbles larger than 100 microns.
- Non-Intrusive, Clamp-On Transducer for Most Pipes from 6 mm to 3m (1/4 to 120′)
- Insertion Probe Transducer Also Available
- Wide Measuring Range of 0.05 to 9 mps (0.15 to 30 fps)
- ±2% of Calibrated Span Accuracy
Retail price from $2 693
Available
The FTB4700 is a plated brass meter ideal for water applications in the ranges 0.2 to 18 GPM. The FTB4800 provides a wide range flow metering in a stainless steel package.
- Square Wave Output
- One Moving Part
- Rugged Nickel-Plated Brass Body or 316 Stainless Steel
Retail price from $1 875
Available
The FTB300-Series of digital paddlewheel are an economical choice for low flow rate applications. They use Infra-red light beam technology. Available in 1/8 FNPT, 1/4 FNPT.
- NEMA 4X (IP56) Enclosure
- 6-Digit LCD
- Displays both Rate and Total
- Non-Volatile Programming and Total
Retail price from $268
Available
The FMG80A Series magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in ¼” to ¾” pipe/tube.
- No Moving Parts
- Requires No Straight Pipe
- Chemical and Corrosion Resistant
- Insensitive to Fluid Density and Fluid Viscosity Changes
Retail price from $1 523
Available
The FLMW and FLMH flowmeters can be installed in the fluid line without flow straighteners. The spring-and-piston type assembly protects them against changes in viscosity.
- Direct Reading Dual Scale
- Range 0.1 to 150 GPM (0.4 to 550 LPM)
- High Pressure: 3500 psi (Brass or Aluminum) 6000 psi (Stainless Steel)
- High Temperature: to 116°C (240°F) (Standard) or 204°C or 316°C (400 or 600°F) (Optional)
Retail price from $388
Available
The Series GFC Gas Mass Flow Controllers combine a straight tube sensor with a restrictor flow element. It is available for flow ranges up to 1000 L/min and offered in aluminum or 316 SS in 1/4″, 3/8″, 1/2″ and 3/4″ sizes.
Retail price from $2 145
Available
The Series TUF Ultrasonic Energy Meter is a highly accurate and stable energy meter that utilizes ultrasonic technology to measure heating and cooling energy consumption. The Series TUF is a compact meter with a flowmeter and energy calculator in one, making it great for installation on chillers and boilers.
Retail price from $642
Available
The Series DTFW Variable-Area Flowmeter for Liquids measures water flow rates with ± 2% of full-scale accuracy at a competitive price. Durable metal construction ensures great compatibility and the strength to withstand system pressures of up to 3000 psig (200 bar). 1/4″, 1/2″ and 1″ connections are available, with construction choices of a high quality brass or stainless steel. Comes pre-calibrated for horizontal in-line mounting.
Retail price from $627
Available
The Series TVA All Fluoropolymer Flowmeters are ideal for high purity or corrosive liquid applications. This series of flowmeters features a 0 to 10 scale graduations denoting a discrete flow rate.
Retail price from $795
Available
The FL9000-AC flowmeters are ideal for a wide range of flow monitoring applications. Additional features include an adjustable flow alarm externally mounted on the meter.
- Easy to Install, In Any Position
- No Special Piping or Flow Straighteners Required
- Automatically Signals Alarm
- ±5% FS Accuracy
Retail price from $330
Available
The FL-3000 and FL-3100 flowmeters are designed for applications which involve corrosive or ultra-pure fluids. The meters are equipped with built-in PTFE needle valves.
- Excellent Chemical Compatibility for Use with Corrosive or Ultra-Pure Fluids
- ±2% of Full Scale Accuracy
- Shield Magnifies Scale for Accurate Readings
Retail price from $368
Available
The FDT-25 handheld ultrasonic flowmeter is designed to work with clamp-on transducers to enable the flow of a liquid within a closed pipe to be measured accurately.
- High Accuracy Ultrasonic Flow Meter, better than 1%.
- Wide Measurement Range from DN15~DN6000mm
- Rechargeable Power Supply: Built-in high-capacity NiMH rechargeable batteries will last more than 10 hours (Fully charged).
- Non invasion measurement, can achieve measurement with clamp on sensors
Retail price from $1 810
Available
The FP-5060 Series micro-flow sensors are constructed of polyphenylene sulfide and have high material strength for clean process liquids, regardless of fluid color.
- Measures Flow Rates As Low As 0.03 GPM, 0.11 LPM
- Splash-Proof
- All Plastic Construction for Superior Chemical and Corrosion Resistance
Retail price from $1 875
Available
Fluid through the FPB1400 causes the paddlewheel to spin. As the paddle magnets spin, electrical pulses are produced in which frequency is proportional to the flow rate.
- Easy to Install and Operate
- Mounts in Any Direction
- Only One Moving Part
- Visual Flow Indication
Retail price from $626
Available
The FMG980 is highly suitable for difficult applications with changing viscosities and pulsating flows, such as air-driven diaphragm pumps.
- No Moving Parts
- Durable
- Easy to Install
- Easy to Maintain
Retail price from $927
Available
The FMC-5000 Coriolis Mass Flow Meter is widely used for flow measurements and custody transfer in industries such as petroleum, chemical, pharma, food and dairy, and more.
- Mass Flow Rate, Volume, Density and Temperature Measurements
- Rugged Meters with No Moving Parts Results in Minimal Maintenance
- Accuracy Over a Wide Flow Range From a Single Meter Optimizes Plant Efficiency
- No Flow Conditioning or Straight Pipe Runs Required, Making Installation Simplified and Less Expensive
Retail price from $5 899
Available
Program, record, analyze, and control flow rates of various gases with Series DMF Digital Mass Flow Controller. Controllers are designed with straight tube sensors with restrictor flow elements to ensure laminar gas flow for accurate and repeatable results. Series DMF are unaffected by temperature and pressure variations.
Retail price from $3 551
Available
The Series PUF Portable Ultrasonic Flowmeter Kit utilizes the transit-time difference for measuring flow rates in pipes non-invasively. It is a compact and lightweight instrument incorporating the latest electronics and signal processing technologies, realizing high performance and easy operation. This device is capable of 20 hours continuous operation with its built-in battery. The PUF comes with an IP67 rated carrying case with molded foam inserts to hold and protect all equipment against dust and water. The screen offers easy to read text with a convenient backlight for visual comfort. The efficient layout of the function keys add to this unit’s easy to use programming. The unit comes with RS232 and USB connections to allow for easy connection to any personal computer or printer.
Retail price from $12 576
Available
The Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter is available in a variety of materials including PVC, Aluminum, Brass, or 316 stainless steel. The variety of optional materials allows the flowmeters to be used in many different applications. The Series INSITE Flowmeters are also available with an optional field adjustable reed switch for high and low alarms.
Retail price from $153
Available
The Series DR Direct Read Variable Area Glass Flowmeters are ideal for the direct flow measurement of air, water, and other commonly used gases. These flowmeters are designed with direct read scales with no need for correlation charts. They feature borosilicate glass tubes in 150 mm or 65 mm scales with aluminum and SS metering valve options.
Retail price from $333
Available
The OMEGA’s FL-9000 EZ-View flowmeters provide accurate, in-line indication of oil or water flow rates at an economical cost and can be mounted with no straight pipe runs
- ±5% Full Scale Accuracy
- Direct Reading for Oil and Water
- NPT or Solder Fittings
- Polysulfone Construction
Retail price from $99
Available
This rugged direct-reading flowmeter monitors air flow rates to determine optimum performance, flow regulator settings, or pneumatic system performance.
- ±2% Full Scale Accuracy*
- ±1% Repeatability
- 1000 psig Pressure Rating
- Calibrated to Read in SCFM @ 100 psig
Retail price from $338
Available