Products not found
The Model TDFT Thermal Dispersion Flow Transmitter has continuous frequency output. It fits applications with pipe sizes from 1/2″ to 2″ (12.7 to 50 mm) and features 316L stainless steel housing for use in harsh environments.
Retail price from $514
Available
Series DR4 Glass Flowmeters offer a simplified solution to the problem of fluid flow indication at higher capacity levels. Flowmeters have a direct reading scale for air or water and are designed to withstand even the harshest industrial applications. Permanently fused ceramic scale has integral float guides for optimum float performance. Reflective plastic background and 1.5 X magnification lens reduces eye fatigue and allows for more accurate readings. Units include a safety blow-out back panel for additional protection.
Retail price from $1 100
Available
The FLC Series is the economical way to monitor municipal water flows, verify pump outlets and monitor fluid conditions. Piston design allows for installation in any position
- Mounts in Any Direction
- Compact and Rugged
- Allows Visual Fluid Inspection
- Economical Design
Retail price from $155
Available
Rugged In-Line Flow Sensors Available in 1/2″, 3/4″, and 1-1/4″ sizes are protected in a sturdy cast aluminum enclosure, and are easy to install and mount in any position.
- 2% FS Accuracy
- No Straight Pipe Run Required
- Mounts in Any Position
- 4 to 20 mA, 0 to 5 Vdc and 0 to 10 Vdc Outputs Standard
Retail price from $1 080
Available
The FLR-1600A and FLV-4600A series flowmeters and controllers use two of the best studied physical properties of liquids to measure flow: Pressure and Viscosity.
- Response Time of 20 milliseconds Typical (Meter)
- Turndown Ratio of 50:1
- Push Button Tare (with Display)
- Accuracy of ±2% Full Scale
Retail price from $1 988
Available
This high accuracy Gas Turbine system measures the volumetric flow of gas through a pipeline. Gas flowing through the meter turns the turbine rotor.
- Outstanding Accuracy
- Hybrid Ceramic Bearings for Superior Life
- DC or AC (Optional) Power
- Pulse and Analog Output
Retail price from $3 201
Available
The FPB100 sensor is an industry standard and has the added functionality of various output options including flow switch, multi-functional pulse divider or 4 to 20 mA.
- 4 to 20 mA and Programmable Switch/Pulse Divider Output
- Low Flow Capabilities from 0.1m/s (0.3 ft/s)
- Polypropylene or PVDF Material
- Installs into Pipe Sizes DN 15 to DN 200 (0.5 to 8′)
Retail price from $692
Available
The FMG70B Series from OMEGA is a trio of extremely compact, low cost, inductive magnetic flow sensors. The output signal frequency (or current) is proportional to the flow.
- No Moving Parts
- No Flow Obstructions
- Maintenance-Free
- Fast Response Time (< 500 ms)
Retail price from $1 615
Available
The FL-2000 Series offers a wide variety of precision flow meters for use in medical, industrial, chemical, and laboratory applications at an economical price.
- Easy-to-Read English or Metric Scales
- Water Ranges from 4 CCM to 20 GPM, Air Ranges from 40 CCM to 4000 LPM
- Threaded Brass Inserts for Quick Installation
Retail price from $91
Available
The Series DFM Digital Flow Meter is the industry leader in the measurement of mass and volumetric flow rates of process gases. Using the OLED/joystick interface, the flowmeter can measure up to 30 different gases. Simultaneous displays of mass flow, volumetric flow, pressure and temperature parameters promote applications in a variety of industries. NIST traceable certification included.
Retail price from $1 913
Available
The Series PFT Insertion Paddlewheel Flowmeters are used to monitor liquid flow rates in pipes from 1-1/2 to 40″ and is available in brass or 316 SS body. The unit outputs a frequency proportional pulsed or 4 to 20 mA output. The pulse models are a square wave output signal with frequency proportional to the flow velocity and the 4 to 20 mA models have a linear output of the velocity with 4 mA equal to 0 ft/s and 20 mA equal to 25 ft/s.
Retail price from $602
Available
The Series DTFA Variable-Area Flowmeter for Gases measures gas flow rates with ±5% of full-scale accuracy at an affordable price. Rugged aluminum construction ensures great compatibility and the strength to withstand system pressures of up to 3000 psig (200 bar). Available in either 1/4″ or 1/2″ NPT connections. Comes pre-calibrated for horizontal in-line mounting.
Retail price from $434
Available
The Series VAT Variable Area Fluoropolymer Flowmeter is ideal for high purity or corrosive liquid applications. This series of flowmeters features a 0 to 10 scale for flow indication. Each unit is individually leak tested to a leak integrity rating of 1 x 10-7 sccs Helium or better.
Retail price from $583
Available
The FL-2500 Series direct read flow meter kits offer include seven interchangeable direct read scales for air, water, Argon, CO, Helium, Nitrogen and Oxygen.
- Easy-to-Read Dual English and Metric Scales
- Interchangeable Scales for 6 Common Gases and Water
- Meters are Offered With or Without Built-In Needle Valves
- Economical and Compact
Retail price from $99
Available
The FL-8000A Series of general purpose flowmeters is designed to provide economical, accurate flow rate indication for oil and water and can be mounted in any position.
- ±2% Full Scale Accuracy
- ±1% Full Scale Repeatability
- Mounts in Any Position
- Direct Reading for Oil and Water
Retail price from $1 137
Available
FMA2700/FMA2800 Series Electronic Mass Flowmeters and FMA3700/FMA3800 Mass Flow Controllers are perfect for gas flow application which require an all stainless steel design
- Economical
- Compact
- Power Supply Included
Retail price from $1 060
Available
FTB8000HW uses the multi-jet principle that has been an accepted standard for many years. This type of meter is known for its wide range, and accuracy in low quality water.
- Flow Rates from 0.22 to 132 GPM
- 150 psi Maximum Operating Pressure
- 90°C (194°F) Maximum Operating Temperature
- Field-Adjustable Pulse Output (Optional)
Retail price from $277
Available
The FPR300-Series body material is polypropylene, with transparent acrylic covers for visual flow indication. Polypropylene covers are available as an option.
- Only One Moving Part
- Field Replaceable Sensor
- Excellent Low Flow Performance
- Versatile Square Wave Signal
Retail price from $411
Available
The FMG3000 Series magmeters are insertion-style magnetic flow sensors with no moving parts. All models are constructed of corrosion-resistant materials.
- For 0.5 to 8 in. Pipes
- No Moving Parts
- 0.05 to 5 m/s (0.15 to 16.4 ft/s) Flow Rate Range
- Accurate Measurement Even in Dirty Liquids
Retail price from $2 147
Available
The FLD is suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, and liquid and gas measurement in laboratories.
- Direct Read Variable Area Flow Meters for Air, Water, N2, H2, CO2, Ar, He, and O2
- Rib-Guided or Fluted Metering Tubes Facilitate Stable, Accurate Readings
- Magnifier Lens in Front Shields to Enhance Reading Resolution
- Interchangeability of Flow Tubes and Floats
Retail price from $167
Available
The Series DFC Digital Flow Controller combines a straight tube sensor with a restrictor flow element to provide accurate readings and control. Simultaneous displays of mass flow, volumetric flow, pressure and temperature parameters promote applications in a variety of industries. NIST traceable certification included.
Retail price from $2 505
Available
The Series UFB Ultrasonic Flowmeter Set utilizes the transit-time difference for measuring flow rates in pipes non-invasively. This is the permanent model, allowing the user to mount the converter on a surface or pipe. The easy-to-use compact and lightweight design is intended for mechanical devices using ideally homogeneous liquids that contain no air pockets. The Series UFB comes with a sturdy IP65 rating, protecting it from dust and direct water contact. The Series UFB has 4 to 20 mA and pulse output capabilities.
Retail price from $8 084
Available
The Series DTFO Variable-Area Flowmeter for Liquids measures oil rates with ±2% of full-scale accuracy at an affordable price. Durable metal construction ensures great reliability and the strength to withstand system pressures of up to 3000 psig (200 bar). Available in 1/4″, 1/2″ and 1″ connections for a wide variety of applications. Comes calibrated for horizontal in line mounting.
Retail price from $627
Available