Products not found
The Model ULSS Ultrasonic Level Sensor provides non-contact, continuous ultrasonic level measurement of fluids for short range applications. Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions. The Model ULSS has failsafe logic that is easily configured to custom applications via free software removing the need for target calibration. Using the free software, the Model ULSS can be programmed to transmit an output signal as well as set the four relays for control applications. This rugged design comes with a NEMA 6P submersible enclosure rating to ensure a long lasting unit.
Retail price from $781.2
Available
The Series CRF2 is a level transmitter providing a two-wire 4 to 20 mA output to indicate level of liquids, powders and bulk materials. State of the art sensing technology in the CRF2, using impulse RF admittance measurement provides excellent accuracy and stability. The CRF2 senses capacitance changes resulting from the height of the material in the tank between the probe and the tank wall. In non-metallic tanks or tanks that do not have the wall parallel to the probe a ground reference must be used.
Retail price from $1043,25
Available
PBLT2 and PBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.
Retail price from $785,6
Available
The MBLT Miniature Submersible Level Transmitter is only 0.63″ in diameter making it ideal for level monitoring in well and borehole applications. Constructed for years of trouble free service, the MBLT has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Featured in the MBLT is a precision ±0.10% or ±0.25% of full scale accuracy output, better than BFSL or BSL rated outputs used by most competitors. Lightning and surge protection (not guaranteed or covered by standard warranty) is included standard to stand up in harsh applications. MBLT comes with a choice of polyether polyurethane or ETFE cable materials and all are vented for barometric pressure compensation. Vent is covered with a maintenance-free filter preventing particulate or water droplets from entering the transmitter.
Retail price from $742,05
Available
The Series FBLT Flush Tip Submersible Level Transmitters measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a narrow 316 SS housing with PTFE coated flush diaphragm tip.
Retail price from $990,8
Available
The Series ULT Ultrasonic Level Transmitter provides non-contact measurement of liquid levels in an explosion-proof body. It is capable of measuring up to 32.8′ (10 m) with a PVDF sensor and 4-20 mA output.
Retail price from $1878,25
Available
The Model ULSM Ultrasonic Level Sensor provides non-contact, continuous ultrasonic level measurement of fluids for medium range applications. Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions. The Model ULSM has failsafe logic that is easily configured to custom applications via free software removing the need for target calibration. Using the free software, the Model ULSM can be programmed to transmit an output signal as well as set the four relays for control applications. This rugged design comes with a NEMA 6P submersible enclosure rating to ensure a long lasting unit.
Retail price from $953.55
Available
ZTD displacer level (interface) transmitter is an intelligent level measuring instrument with international leading level independently developed by DDTOP after many years of technical research. The simple buoyancy principle is used to detect the change of level, and then the magnetic signal is converted into a stable 4-20mA current signal and output through the torque tube assembly and the hall sensor. The instrument has a variety of configurations and pressure levels, which are suitable for various applications.
price by request
Available
UQZ type magnetic float level transmitter is based on magnetic float as measuring element. The float moves up and down with level change, and at the same time, the magnetic field is coupled to the inductive switch in the sensor. The change in the switch causes the output signal to change, which finally to know change of level.
The instrument is suitable for sewage treatment in the petroleum, chemical, electric power, light industry and pharmaceutical industries, as well as the measurement of the medium level in various atmospheric and pressure vessels, especially for the measurement of the level of underground storage tanks and storage tanks. According to the different installation methods, it can be divided into top-mounted and side-mounted.
price by request
Available
UQD ball float level transmitter consists of measuring part and signal controller part. According to structural features, the measuring part can be divided into 90 type with small angle, 91 type with large angle, 92 type with external float. Its signal controller part is divided into analog type and intelligent type. The product can be widely used for the measurement of various medium level, and it is an ideal instrument for petroleum, chemical, metallurgy, electric power industries/
price by request
Available
ULB Type glass level gauge is a local indicating instrument produced according to the principle of connector. The medium in the container was led to the glass level gauge, and the actual height of level can be read from the transparent glass. Cylinder type glass level gauge is a large-diameter glass level gauge, which is suitable for medium with high viscosity or strong bubbles. For low-temperature medium, glass level gauge can use anti-frost fins. Using the temperature gradient principle, add anti-frost fins on both sides of the window, and observe the liquid level through the anti-frost fins.
price by request
Available
UHC magnetic level gauge provides a safer, more reliable and more visible option than conventional glass level gauge. The float moves up and down with the change of level, and the float transmits the level signal through the coupling magnetic field, which divides into the local indication type and the remote transmission output type.
Chamber and float have a variety of materials and pressure-grade options and are suitable for complex process applications of current major operating devices.
price by request
Available
TRG804X non-contact type radar level transmitter has a wider measurement range, and better diagnostic function. The use of advanced signal processing technology can filter out false targets or other noise signals. Pulse string radar level transmitter transmits short pulse string to the liquid surface. Through antenna, it can transmit extremely short pulses with very low energy. By using ultra-high speed timing circuit to measure the time required for the pulse signal to meet liquid surface and reflect echo.
price by request
Available
The latest generation of TRG802X series guided wave radar level transmitter is a two-wire 24VDC powered level transmitter, which adopts advanced microprocessor and unique echo processing technology.
TRG802X series guided wave radar level transmitter can be applied to various complex working conditions and applications. Whether it is a light hydrocarbon or water-based solution, it is suitable.
price by request
Available
MLT type magnetostrictive level transmitter is a kind of high-precision level transmitter, and it is also mounted as an external binding transmitter on the local level gauge. The product can be used for level and interface measurement. Through the magnetostrictive wire, the core part of the sensor, the small changes in magnetic field vectors are transformed into mechanical waves. The sensor circuit transmits current pulses along the magnetostrictive wire inside the sensor tube, forming a ring magnetic field around the magnetostrictive wire. When a float is encountered, the magnetic field generated by the permanent magnetic steel inside the float magnetizes the magnetostrictive wire axially. When the two magnetic fields are superimposed, the pulse is transmitted along the magnetostrictive wire to the top and bottom ends of the sensor respectively, and the float position is accurately confirmed by measuring the time difference between the starting and returning pulses.
price by request
Available
UTX tuning fork type level controller is suitable for high and low position detection of various level in tank or pipes. Products are widely used in chemical fiber industry, rubber industry, tire industry, cement industry, iron and steel industry, food factory, pharmaceutical factory, petrochemical plant, feed plant and other industries raw material / process / finished product barrel tank level control.
price by request
Available
The Series CLT Continuous Level Transmitter provides up to the minute tank level monitoring with a customized level transmitter. Transmitters can be configured for 4 to 20 mA or proportional voltage output, 316 SS or Buna-N stem and floats, and lengths up to 72″ (183 cm).
price by request
Available
The high-pressure level switch is a displacer drive unit, which uses a single switch assembly for level alarm or control. These devices are designed for liquids with working pressures up to 250 bar and specific gravities of 0.40 and above. A permanent magnetic sensor is attached to the rotary switch drive. When the float/displacer rises correspondingly with the rise of the liquid, the corresponding sleeve will move into the range of the magnetic sensor and cause the switch to act accordingly
price by request
Available
UQK400 float level controller is composed of float, connecting rod, magnetic sensor and magnetic switch and signal conversion mechanism. The change of the medium level in the container causes the relative displacement of the float, which drives the connecting rod and the iron core to move up and down to change the relative position of the magnetic sensor. Through the magnetic coupling, the micro switch or the reed switch is operated to achieve l
price by request
Available
The float level controller is based on the principle of buoyancy, and the float moves equidistantly following the liquid level. Because of this, they are commonly used for narrow return level applications.
price by request
Available
The UQK(S)-100 float level controller is connected to the storage tank or container through threads or flanges. When the liquid level changes, the float move with it, so that the magnetic steel at the other end of the rod swings up and down. The structure can be divided into normal (UQK) and self-checking (UQKS) type. The self-checking float level controller can monitor the movement of the inner float through the external handle, which brings great convenience to adjustment and maintenance.
price by request
Available